Template

SWMS: Install, Replace and Test Electrical Safety Devices

by Kelly South, from the Community

30+

Use this Safe Work Method Statement to install, replace and test electrical safety devices such as RCDs and smoke alarms. The template covers scope of works, responsibilities, PPE, pre-start risk assessment, isolation, lockout and testing, step-by-step tasks, tools and equipment checks, references to AS/NZS standards, and verification sign-off. Improve safety, reduce risk of electric shock, and maintain regulatory compliance across worksites.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
SWMS Install or Replace and Test Electrical Safety Devices
This Safe Work Method Statement provides step by step guidance to install, replace, and test electrical safety devices such as RCDs and smoke alarms. It includes a Take 5 risk assessment, PPE requirements, isolating and locking out power, switchboard inspection, testing procedures and trip time recording, replacement steps for failed devices, reinstatement of covers and supply, and tool calibration checks. Controls address electrocution, arcing, manual handling, trip hazards, and ladder use, with references to AS/NZS 4836 and AS/NZS 3017. Verification and sign off are included.
by Kelly South, from the Community
Downloads: 10+
Get
Template
Install Replace and Test Electrical Safety Devices SWMS
This Safe Work Method Statement details the steps, hazards and control measures for installing, replacing and testing electrical safety devices in switchboards and on site. It includes risk assessment, isolation and lockout procedures, RCD trip time and push button testing, smoke alarm inspection and replacement, PPE requirements, and tool and equipment checks. References include AS NZS 4836 and AS NZS 3017 and relevant regulations. Use this template to guide safe electrical work and document verification and sign off before commencing and on completion.
by Himayat Ali, from the Community
Downloads: 10+
Get
Template
SWMS: Electrical Testing, RCD, Smoke Alarms, Earthing
Download a Safe Work Method Statement for electrical testing tasks, including RCD push-button and injection testing, earth fault loop impedance testing, smoke alarm checks, and earthing inspections. The template outlines PPE, lockout tagout procedures, hierarchy of control, manual handling precautions, ladder safety, and responsibilities. It references AS/NZS 4836 and AS/NZS 3017 and includes verification and sign-off, tool and equipment checks, and space for worker details to support compliance.
by Graham Byles, from the Community
Downloads: 10+
Get
Template
SWMS for Electrical Repairs Requiring Isolation
This Safe Work Method Statement outlines the steps, hazards, and controls for conducting general electrical repairs that require isolation. It covers mandatory PPE, lockout/tagout procedures, switchboard assessment, isolation, testing and tagging, repair activities with no live work permitted, re-energisation, and final verification. The SWMS references AS/NZS 4836 and AS/NZS 3017, Electricity Licensing Regulations, and company life-saving rules. It also includes tool and equipment checks and worker sign-off to confirm understanding of hazards, controls, and testing procedures before commencing work.
by Graham Byles, from the Community
Downloads: 10+
Get

SWMS Install or Replace and Test Electrical Safety Devices

This Safe Work Method Statement provides step by step guidance to install, replace, and test electrical safety devices such as RCDs and smoke alarms. It includes a Take 5 risk assessment, PPE requirements, isolating and locking out power, switchboard inspection, testing procedures and trip time recording, replacement steps for failed devices, reinstatement of covers and supply, and tool calibration checks. Controls address electrocution, arcing, manual handling, trip hazards, and ladder use, with references to AS/NZS 4836 and AS/NZS 3017. Verification and sign off are included.

by Kelly South, from the Community

10+

Get

Template

Install Replace and Test Electrical Safety Devices SWMS

This Safe Work Method Statement details the steps, hazards and control measures for installing, replacing and testing electrical safety devices in switchboards and on site. It includes risk assessment, isolation and lockout procedures, RCD trip time and push button testing, smoke alarm inspection and replacement, PPE requirements, and tool and equipment checks. References include AS NZS 4836 and AS NZS 3017 and relevant regulations. Use this template to guide safe electrical work and document verification and sign off before commencing and on completion.

by Himayat Ali, from the Community

10+

Get

Template

SWMS: Electrical Testing, RCD, Smoke Alarms, Earthing

Download a Safe Work Method Statement for electrical testing tasks, including RCD push-button and injection testing, earth fault loop impedance testing, smoke alarm checks, and earthing inspections. The template outlines PPE, lockout tagout procedures, hierarchy of control, manual handling precautions, ladder safety, and responsibilities. It references AS/NZS 4836 and AS/NZS 3017 and includes verification and sign-off, tool and equipment checks, and space for worker details to support compliance.

by Graham Byles, from the Community

10+

Get

Template

SWMS for Electrical Repairs Requiring Isolation

This Safe Work Method Statement outlines the steps, hazards, and controls for conducting general electrical repairs that require isolation. It covers mandatory PPE, lockout/tagout procedures, switchboard assessment, isolation, testing and tagging, repair activities with no live work permitted, re-energisation, and final verification. The SWMS references AS/NZS 4836 and AS/NZS 3017, Electricity Licensing Regulations, and company life-saving rules. It also includes tool and equipment checks and worker sign-off to confirm understanding of hazards, controls, and testing procedures before commencing work.

by Graham Byles, from the Community

10+

Get

SWMS: Install, Replace and Test Electrical Safety Devices

About author

You might also like

SWMS Install or Replace and Test Electrical Safety Devices

Install Replace and Test Electrical Safety Devices SWMS

SWMS: Electrical Testing, RCD, Smoke Alarms, Earthing

SWMS for Electrical Repairs Requiring Isolation

You might also like

SWMS Install or Replace and Test Electrical Safety Devices

Install Replace and Test Electrical Safety Devices SWMS

SWMS: Electrical Testing, RCD, Smoke Alarms, Earthing

SWMS for Electrical Repairs Requiring Isolation