Template

Construction Super Checklist

This construction superstructure checklist helps site teams verify key quality and safety items during build stages. It covers DPM installation, cavity trays and weep vents, tie spacing, mortar quality, lintel bearing, window clips and formers, party-wall fire stopping and insulation, joists and hangers, restraint straps, flooring gluing and leveling, trusses, bracing, fascia and soffit, and spandrel fire protection. Use it to standardize inspections, document issues, and ensure plots are clean and compliant before progressing to roof works.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Brickwork Quality Inspection Checklist (Level 1)

Use this Level 1 brickwork quality inspection to confirm setting out to current architectural drawings, check window and door openings for width, height and plumb, and verify coursing, perp joints and permitted tolerances. Inspect movement joints, cavity ties and brick reinforcement, and confirm lintel installation and bearing as specified. Verify Keyfix cavity trays and movement ties, weep vents, and insulation (Rainscreen Duo Slab) fit, spacing and continuity. Check brick tie channels, compression sleeves, and masonry support locations, bolt torque and pull-out testing. Confirm fire and cavity barriers (Siderise) are approved, correctly fixed, sealed and tightly abutted, with non-combustible DPC where required. Optional stonework checks included. Finish with cavity cleanliness, site tidiness, notes and sign-offs for Callan Construction and the principal contractor.

by Aaron Martin, from the Community

Get

Template

Frame Carpenter Inspection and Test Plan

This Frame Carpenter Inspection and Test Plan template helps builders and site supervisors verify the quality and compliance of framing works. It covers ground floor walls, floor joists and sheeting, first floor walls, and trusses, including checks for correct location, tie downs, bracing, plumb and straight tolerances, fasteners, window flashing, spacing, and cleanliness. Use it to standardize inspections, document issues, and keep sites safe and compliant throughout residential or light commercial construction.

by David Gee, from the Community

60+

Get

Template

Brickwork and External Insulation QA Checklist

This brickwork and external insulation quality assurance checklist helps contractors verify compliance and workmanship on site. It covers brick type selection, consistent 10 mm mortar beds, correct placement of movement joints with channels and ties, proper brick tie spacing, and use of compressible materials. It also checks Tyvek membrane installation over weather defence boards, rainscreen insulation panels, cavity trays and weep holes, fire barriers, plumb and level courses, cavity voids, and final sign off.

by Sebastian Szabo, from the Community

Get

Template

Wall, Floor and Roof Framing Checklist

This wall, floor and roof framing checklist supports building inspectors, builders and local government officers in assessing framing quality and code compliance. Record application details and site information, verify boundary setbacks, materials and grades, and check walls, floors and roofs for correct sizes, spacing and fixings. Review studs, noggins, lintels, tie downs, bracing, trusses and rafters. Confirm ventilation and ant caps, capture photos and notes, and mark items as compliant, non compliant or not applicable to ensure safe, consistent construction.

by Kate Ledo, from the Community

Get

Template

Brick and Blockwork Quality Assurance Checklist

Use this Brick and Blockwork Quality Assurance checklist to standardize masonry inspections on site. Capture photos of sample panels, verify setting out, alignment, and joint tolerances, and check brick slips, wall plates, padstones, and fire barriers. Confirm structural openings, cavity closers, lintels including prefabricated, air bricks and ventilation, DPC and cavity trays, weep holes, wall ties, cavity cleaning and insulation, and movement joints. Record mortar mix and color, protect facework, complete housekeeping, and sign off with approvals.

by Dan Bradstock, from the Community

10+

Get

Template

External Component Quality Checklist

Streamline exterior construction quality assurance with a practical checklist covering scaffolding erection and handover, asbestos soffit removal, soffit and fascia installation, and rainwater goods. Verify handrails, toeboards, access gates and certificates; confirm fixings and spacing to spec; check gutter falls, seals and rainwater pipe alignment; perform water tests; and ensure areas are clean and tidy. Include hedge trimming, fence and gate installation checks, snagging, supervisor sign-off, and client handover documentation to drive consistent standards and compliant outcomes.

by Kev Fisher, from the Community

Get