Template

BubbleDeck and Form Floor Checklist

by Belinda Hanssen, from the Community

A practical checklist for constructing BubbleDeck and form floors. Verify props and bracing, slab thickness, reinforcement placement including splice and extra bars, re-entrant and starter bars, laps, corners and cover, construction and movement joints, dowels, penetrations and cast-ins, wet area recesses, and holding down bolts. Record concrete strength and slump, confirm no added water, follow engineer instructions, document inspections and rectifications, and ensure timely curing. Capture photos, notes, and actions for quality assurance and compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Insitu and Precast Walls and Columns Checklist
Use this practical construction checklist to plan and inspect insitu and precast walls and columns. It covers shutter preparation and propping, thickness checks, penetrations and cast-ins, steel reinforcement placement, vertical and starter bars, header beam reinforcement, laps, steps and corners, cover and bar chairs, movement joints, concrete strength and slump, no added water, and curing. For insitu columns, confirm dimensions, base angles, ties, lap lengths, and curing. For precast elements, verify backing rod, dowel sizes, props, weld plates, grouting of dowels, joints and undersides, and sealant application. Supports consistent quality and compliance on site.
by Belinda Hanssen, from the Community
Downloads: 0
Get
Template
Dianella Insitu and Precast Walls and Columns
This construction checklist supports inspections for insitu and precast walls and columns on the Dianella project. It guides checks for formwork cleaning and propping, dimensions and thickness, penetrations and cast ins, steel reinforcement placement and cover, laps and corners, bar chairs, movement joints, concrete strength and slump, and curing. It also covers waterproofing to retaining walls, column ties and starters, prop installation and removal records, weld plates, grouting of dowels, joints and panel undersides, and final sealant. Use it to capture photos, verify engineers instructions, and document compliance throughout concrete works.
by Hanssen Reports, from the Community
Downloads: 10+
Get
Template
Concrete Columns, Walls, Stairs and Lift Cores
Use this structured inspection checklist to verify concrete columns, walls, stairs and lift cores before pours. Review formwork dimensions and stability; reinforcement size, spacing, laps and curtailment; cover, chairs and spacers; edge chamfers; control joints; lintel bars and ligatures; dowels and epoxy bars; stair throat thickness; lift sump and core wall reinforcement; lid slab reinforcement and ferrules; and water-stop placement. Capture notes, approvals and signatures to ensure compliance and quality.
by Cameron Landreth, from the Community
Downloads: 10+
Get
Template
ITP QA Checklist for Suspended Slab Works
This ITP QA template guides quality assurance for suspended slab works from pre-pour to post-pour. It covers verification of current drawings, concrete mix and volume, booking of tests and pump, detailed formwork checks including soffit heights, edges, penetrations, rebates and set downs, safety access, and cast-in items. Reinforcement checks include cover, laps, spacing, starter bars, dowels, shear reinforcement, and engineer sign-off. Post-pour documentation includes dockets, photos, location mark-ups, and surveyor or building reports.
by Rachel McDermott, from the Community
Downloads: 10+
Get

BubbleDeck and Form Floor Checklist

About author

You might also like

Insitu and Precast Walls and Columns Checklist

Dianella Insitu and Precast Walls and Columns

Concrete Columns, Walls, Stairs and Lift Cores

ITP QA Checklist for Suspended Slab Works

You might also like

Insitu and Precast Walls and Columns Checklist

Dianella Insitu and Precast Walls and Columns

Concrete Columns, Walls, Stairs and Lift Cores

ITP QA Checklist for Suspended Slab Works