Template

QC Inspection #2: Power Disconnect Verification

by Kevin Bush, from the Community

This QC Inspection #2 checklist verifies that utilities are safely disconnected and the site is ready after self or GC move out. Confirm the meter has been removed to disconnect power, water is shut off, permits are posted in a permit box, and access is clear. Document the damaged dwelling, interior rooms, additional structures, and marked utility locations with timestamped photos. Combine photos and the checklist into a single PDF, email and upload it as required, and obtain permission to leave the site.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Pre-Demolition QC Inspection Checklist
This pre-demolition QC inspection checklist guides inspectors through verifying approved permits, tenant move-out, and power disconnect prior to demolition. It outlines required timestamped photos, site access and obstruction checks, utility identification and flagging, permit box posting, and documentation steps. Use it to ensure site readiness and compliance within 48 hours of permit issuance.
by Kevin Bush, from the Community
Downloads: 0
Get
Template
QC Inspection Initial Site Visit Checklist
This QC inspection template guides an initial site visit for residential construction and recovery projects. It covers marking and verifying utilities, locating septic and water services, documenting site access and obstructions, assessing damage to driveways and pads, and confirming power status. Inspectors capture timestamped photos, compile a PDF report, and submit by email and the field app. The checklist includes prompts for personal property handling, packing and moving requirements, pods, and change orders, with notes and signatures to formalize findings.
by Kevin Bush, from the Community
Downloads: 0
Get
Template
QC Inspection #4: Post-Demolition Checklist
QC Inspection #4 is a post-demolition checklist to confirm a site is ready for manufactured home delivery. Inspectors verify dirt pad construction per plans, correct flagging for home placement, compliance with municipal setbacks, and marked locations for septic, drain field, and well or water meter. The checklist covers utility stub-ups, required pad slope, and checks for damage or delivery obstructions such as fences, trees, and power lines. It also outlines photo evidence standards with timestamped images and provides onsite submission and reporting steps. Use this template to ensure timely, compliant site readiness and coordinate subcontractor revisits if issues are found.
by Kevin Bush, from the Community
Downloads: 0
Get
Template
Permit Procedure Audit Checklist
This permit procedure audit checklist helps teams review and control permit-to-work processes on site. Use it to check that permits are stored in site folders and in your digital system, verify applicable RAMS and SSoW, confirm permits are fully completed, and ensure stated controls are implemented. Validate that the permit register is up to date and that both issuer and receiver are approved. Capture photos of permits, record locations and dates, and collect signatures to document compliance and accountability.
by Owain Dave, from the Community
Downloads: 10+
Get

Pre-Demolition QC Inspection Checklist

This pre-demolition QC inspection checklist guides inspectors through verifying approved permits, tenant move-out, and power disconnect prior to demolition. It outlines required timestamped photos, site access and obstruction checks, utility identification and flagging, permit box posting, and documentation steps. Use it to ensure site readiness and compliance within 48 hours of permit issuance.

by Kevin Bush, from the Community

Get

Template

QC Inspection Initial Site Visit Checklist

This QC inspection template guides an initial site visit for residential construction and recovery projects. It covers marking and verifying utilities, locating septic and water services, documenting site access and obstructions, assessing damage to driveways and pads, and confirming power status. Inspectors capture timestamped photos, compile a PDF report, and submit by email and the field app. The checklist includes prompts for personal property handling, packing and moving requirements, pods, and change orders, with notes and signatures to formalize findings.

by Kevin Bush, from the Community

Get

Template

QC Inspection #4: Post-Demolition Checklist

QC Inspection #4 is a post-demolition checklist to confirm a site is ready for manufactured home delivery. Inspectors verify dirt pad construction per plans, correct flagging for home placement, compliance with municipal setbacks, and marked locations for septic, drain field, and well or water meter. The checklist covers utility stub-ups, required pad slope, and checks for damage or delivery obstructions such as fences, trees, and power lines. It also outlines photo evidence standards with timestamped images and provides onsite submission and reporting steps. Use this template to ensure timely, compliant site readiness and coordinate subcontractor revisits if issues are found.

by Kevin Bush, from the Community

Get

Template

Permit Procedure Audit Checklist

This permit procedure audit checklist helps teams review and control permit-to-work processes on site. Use it to check that permits are stored in site folders and in your digital system, verify applicable RAMS and SSoW, confirm permits are fully completed, and ensure stated controls are implemented. Validate that the permit register is up to date and that both issuer and receiver are approved. Capture photos of permits, record locations and dates, and collect signatures to document compliance and accountability.

by Owain Dave, from the Community

10+

Get

QC Inspection #2: Power Disconnect Verification

About author

You might also like

Pre-Demolition QC Inspection Checklist

QC Inspection Initial Site Visit Checklist

QC Inspection #4: Post-Demolition Checklist

Permit Procedure Audit Checklist

You might also like

Pre-Demolition QC Inspection Checklist

QC Inspection Initial Site Visit Checklist

QC Inspection #4: Post-Demolition Checklist

Permit Procedure Audit Checklist