Template

Pull-Out Test Template for Anchor Proof Loading

by Alex Turner, from the Community

10+

Streamline on-site anchor verification with this pull-out test template. Built for construction QA teams, it aligns with BS 8539 and CFA site testing for post-installed anchors in concrete and masonry. Capture test setup, equipment IDs, loading type, proof loads, curing times, base material, spacing, and edge distances. Log results and comments, attach photos, and produce a clear pass/fail record to support compliance and handover.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Scaffold Anchor Tie Test Report
Use this Scaffold Anchor Tie Test Report to document physical anchor testing in accordance with NASC TG4. Capture anchor type, base materials, test locations, required and achieved test loads, and pass or fail outcomes. Record equipment details and calibration dates, attach calibration certificates, and note the installer of ties. Identify the tester, sign off, and keep an auditable record for compliance and site safety. Ideal for scaffolding contractors and site managers who need a consistent, professional way to verify anchor performance and maintain TG4 compliance across projects.
by Andrew Housecroft, from the Community
Downloads: 0
Get
Template
NJS Scaffolding - Scaffold Anchor Tie Test Report
This scaffold anchor tie test report template supports physical anchor testing in accordance with NASC TG4. Capture the type and location of anchors, base materials (brick, mortar joints, blockwork, timber, concrete), and the number of tests. Record required and achieved test loads, equipment and calibration details, pass or fail outcomes, installer details, and tester sign-off for compliance and traceability.
by David Kearney, from the Community
Downloads: 70+
Get
Template
Scaffold Anchors and Tie Pull Test Report
This Scaffold Anchors and Tie Pull Test Report template helps teams document preliminary and proof tests for scaffold ties and anchors across various base materials. Record tester details, calibration dates, tie classes and working loads, anchor types, hole dimensions and depths, applied torque, and tensile load. Track multiple tie pull tests with locations, pass or fail outcomes, and notes. Includes guidance on testing frequency, actions after failures, and best practices for distributing tests around the scaffold. Designed to verify correct installation and substrate capacity, support compliance, and provide a clear audit trail with inspector sign-off.
by Seb Lik, from the Community
Downloads: 30+
Get
Template
Ground Anchors Inspection and Test Plan
Use this Civil Works Ground Anchors Inspection and Test Plan to manage quality and compliance for anchor installation and rectification. The template covers pre rectification checks, geotechnical testing, structural design attachments, and survey mark verification. Record drilling inclination, anchor type and RL, drilling and sleeving dates, bond and free lengths, core depth, and grout volume. Capture proof and lock off loads, stressing hold time, and final lock out status. Attach photos, as built locations, and subcontractor, foreman, and project manager signatures to verify completion and review.
by Anthony Bechara, from the Community
Downloads: 0
Get

Scaffold Anchor Tie Test Report

Use this Scaffold Anchor Tie Test Report to document physical anchor testing in accordance with NASC TG4. Capture anchor type, base materials, test locations, required and achieved test loads, and pass or fail outcomes. Record equipment details and calibration dates, attach calibration certificates, and note the installer of ties. Identify the tester, sign off, and keep an auditable record for compliance and site safety. Ideal for scaffolding contractors and site managers who need a consistent, professional way to verify anchor performance and maintain TG4 compliance across projects.

by Andrew Housecroft, from the Community

Get

Template

NJS Scaffolding - Scaffold Anchor Tie Test Report

This scaffold anchor tie test report template supports physical anchor testing in accordance with NASC TG4. Capture the type and location of anchors, base materials (brick, mortar joints, blockwork, timber, concrete), and the number of tests. Record required and achieved test loads, equipment and calibration details, pass or fail outcomes, installer details, and tester sign-off for compliance and traceability.

by David Kearney, from the Community

70+

Get

Template

Scaffold Anchors and Tie Pull Test Report

This Scaffold Anchors and Tie Pull Test Report template helps teams document preliminary and proof tests for scaffold ties and anchors across various base materials. Record tester details, calibration dates, tie classes and working loads, anchor types, hole dimensions and depths, applied torque, and tensile load. Track multiple tie pull tests with locations, pass or fail outcomes, and notes. Includes guidance on testing frequency, actions after failures, and best practices for distributing tests around the scaffold. Designed to verify correct installation and substrate capacity, support compliance, and provide a clear audit trail with inspector sign-off.

by Seb Lik, from the Community

30+

Get

Template

Ground Anchors Inspection and Test Plan

Use this Civil Works Ground Anchors Inspection and Test Plan to manage quality and compliance for anchor installation and rectification. The template covers pre rectification checks, geotechnical testing, structural design attachments, and survey mark verification. Record drilling inclination, anchor type and RL, drilling and sleeving dates, bond and free lengths, core depth, and grout volume. Capture proof and lock off loads, stressing hold time, and final lock out status. Attach photos, as built locations, and subcontractor, foreman, and project manager signatures to verify completion and review.

by Anthony Bechara, from the Community

Get

Pull-Out Test Template for Anchor Proof Loading

About author

You might also like

Scaffold Anchor Tie Test Report

NJS Scaffolding - Scaffold Anchor Tie Test Report

Scaffold Anchors and Tie Pull Test Report

Ground Anchors Inspection and Test Plan

You might also like

Scaffold Anchor Tie Test Report

NJS Scaffolding - Scaffold Anchor Tie Test Report

Scaffold Anchors and Tie Pull Test Report

Ground Anchors Inspection and Test Plan