Template

Pre Line Plumbing and Build Quality Check

by Michael Clark, from the Community

10+

This pre line plumbing and build quality checklist helps verify workmanship and compliance before wall linings are installed. It covers pipe support and protection, taping around penetrations, ensuring no pipework sits in cavities, hot water cylinder tray checks, pressure testing at 1500 kPa for 30 minutes, stack system water tests, and roof vent sleeves. Build QA items include framing moisture within limits, complete insulation per specifications, engineer detail checks, secured and sealed windows and doors with protective coverings, bath packing and surrounds, safety glass verification, site cleanliness, and space for additional notes. Use this template to standardize pre line inspections and reduce rework.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Pre-Line Audit Checklist
This pre-line audit checklist helps builders and site supervisors confirm a home is ready for lining. It covers exterior and entry elements such as windows and front doors, fire protection including fire sealant, collars, and penetrations, and verification that cavity, plumbing, and framing inspections have passed. Structural checks include framing location, straightness, moisture, and nogging for fixtures like range hoods, heat pumps, vanities, towel rails, and mirrors. Services are validated for correct locations and heights for switches, sockets, wet area clearances, and lighting. The checklist also reviews insulation quality, ceiling systems and seismic requirements, and readiness for plasterboard delivery and fixing.
by Sam Cometti, from the Community
Downloads: 0
Get
Template
Plumbing and Heating QA Checklist
This quality assurance checklist for plumbing and heating guides installers through first and second fix work, gas installation, and finals. It covers soils and waste, pipe support and routing, separation of hot and cold services, identification and lagging, bathroom and kitchen pipework, radiator placement, boilers and cylinders, towel rails and sanitaryware, testing to manufacturer and building regulations, tightness tests, commissioning and Benchmark documentation, protection and housekeeping, and final inspections. Use it to verify compliance with builder specifications, water regulations, and gas safety requirements across new build plots.
by jake emery, from the Community
Downloads: 0
Get
Template
qldBUILT QA: Pre-line Inspection Checklist
This pre-line inspection checklist helps builders and site supervisors verify all critical trades are completed and compliant before lining internal walls. It covers plumbing rough-in, carpentry and framing checks, electrical and data cabling, passive fire protection, insulation R-values and installation quality, HVAC locations and access, and window and door joinery. Prompts include confirming QA documents from each contractor, code compliance for service penetrations, correct nogging and fixings, and readiness for kitchen, bathroom, and access features. Use this checklist to ensure watertightness, structural accuracy, and safety sign-offs prior to lining.
by Lance Holland, from the Community
Downloads: 0
Get
Template
Stage 1 Inspection Checklist
This Stage 1 inspection checklist helps construction teams verify critical pre-roof elements before progressing to superstructure. Items include chassis and deck setup, coach bolts secure to chassis, boarding per specification, first-fix plumbing, pressure tests pre-decking and deck down, radiator pipework location and size, hot and cold lines defined, open ends sealed, and flow and return identified. It also covers timber condition and fixing points, center lugs alignment, and key dimensional checks: openings are square and to drawing, internal and external walls are square, level, and plumb, ceiling line is level, and locations match supplied drawings. Post-roof readiness items such as Velux and window liners, fireplace fitted and boarded, cuts and halvings, wall plate condition, and general workmanship are included to ensure quality and compliance at the first build stage.
by Scott Calvert, from the Community
Downloads: 10+
Get

Pre Line Plumbing and Build Quality Check

About author

You might also like

Pre-Line Audit Checklist

Plumbing and Heating QA Checklist

qldBUILT QA: Pre-line Inspection Checklist

Stage 1 Inspection Checklist

You might also like

Pre-Line Audit Checklist

Plumbing and Heating QA Checklist

qldBUILT QA: Pre-line Inspection Checklist

Stage 1 Inspection Checklist