Template

Cavity Wall Insulation Post Inspection

by Lee Gregory, from the Community

Use this cavity wall insulation post-installation checklist to confirm workmanship quality, safety, and scheme compliance. Verify injection holes are filled and finished, vents, flues, and chimneys are clear per HSE/CIGA guidance, scaffolding removed, and cavity brushes fitted as required. Check fire detection to BS5839 Grade F LD2, CO alarms, customer documentation, and care standards. Capture QA notes and signatures, and log any unsafe situations or complaints.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Dyson Cavity Wall Extraction Report
Use this Dyson Cavity Wall Extraction Report to capture post-work details after cavity wall insulation extraction. Record client information, property type, construction and year built, fuel type, and cavity width. Verify full removal of material and debris, installation of cavity brushes, removal and sleeving of ventilators, and any additional vents fitted. Confirm combustion vent suitability and cleanliness before handover, and assess readiness for re-injection. Include comments for each step and collect auditor and customer signatures.
by Lauren Rimmer, from the Community
Downloads: 0
Get
Template
Post Extraction and Cavity Wall Survey Checklist
This template supports post extraction audits and cavity wall survey work for residential and commercial buildings. It captures address and tenure details, property type, age, and floor construction, then assesses exterior finishes and structural condition. It verifies heating appliances, flues, chimneys, ventilation, and safety monitors, and records internal inspections for damp, mould, and condensation. For cavity wall insulation, it documents scheme type, materials, vents, adjoining properties, and requirements under PAS 2035. It includes elevation photos, DPC measurements, cavity depth checks, borescope evidence, dynamic risk assessment, and installation checks to confirm readiness for reinstallation and compliance.
by Vinnie Stokes, from the Community
Downloads: 10+
Get
Template
Post Extraction and Cavity Wall Survey
This template supports post extraction and cavity wall surveys for residential and commercial properties. Inspect structural and external conditions, finishes, guttering, and access. Capture heating type, flue and chimney details, and verify safety monitors. Conduct boroscope checks, assess wall ties, confirm insulation removal, fit cavity brushes, and make good extraction holes. Check and document vents, trickle vents, and ventilation requirements per PAS 2035. Perform internal inspections for damp, condensation, and loft ingress, with photos and measurements of cavity depths across elevations. Includes dynamic risk assessment and installation checks to ensure suitability for reinstallation and occupant safety.
by William Wright, from the Community
Downloads: 0
Get
Template
Cavity Wall Insulation Inspection Report - Master v2
This Cavity Wall Insulation inspection report template (Master v2) helps assess and document issues following CWI installations. Record claimant and property details, capture photos, log damp and mould evidence, check DPC height and brickwork condition, and note cavity barriers. Add room humidity and damp meter readings, list affected rooms, and document any alterations since installation. Include health impact notes, borescope findings for each elevation, wall area and cavity volume calculations, insulation type used, and guarantee details such as CIGA or REIGA. Conclude with assessor approval and attach supporting media and certificates.
by Ted Windemer, from the Community
Downloads: 0
Get

Dyson Cavity Wall Extraction Report

Use this Dyson Cavity Wall Extraction Report to capture post-work details after cavity wall insulation extraction. Record client information, property type, construction and year built, fuel type, and cavity width. Verify full removal of material and debris, installation of cavity brushes, removal and sleeving of ventilators, and any additional vents fitted. Confirm combustion vent suitability and cleanliness before handover, and assess readiness for re-injection. Include comments for each step and collect auditor and customer signatures.

by Lauren Rimmer, from the Community

Get

Template

Post Extraction and Cavity Wall Survey Checklist

This template supports post extraction audits and cavity wall survey work for residential and commercial buildings. It captures address and tenure details, property type, age, and floor construction, then assesses exterior finishes and structural condition. It verifies heating appliances, flues, chimneys, ventilation, and safety monitors, and records internal inspections for damp, mould, and condensation. For cavity wall insulation, it documents scheme type, materials, vents, adjoining properties, and requirements under PAS 2035. It includes elevation photos, DPC measurements, cavity depth checks, borescope evidence, dynamic risk assessment, and installation checks to confirm readiness for reinstallation and compliance.

by Vinnie Stokes, from the Community

10+

Get

Template

Post Extraction and Cavity Wall Survey

This template supports post extraction and cavity wall surveys for residential and commercial properties. Inspect structural and external conditions, finishes, guttering, and access. Capture heating type, flue and chimney details, and verify safety monitors. Conduct boroscope checks, assess wall ties, confirm insulation removal, fit cavity brushes, and make good extraction holes. Check and document vents, trickle vents, and ventilation requirements per PAS 2035. Perform internal inspections for damp, condensation, and loft ingress, with photos and measurements of cavity depths across elevations. Includes dynamic risk assessment and installation checks to ensure suitability for reinstallation and occupant safety.

by William Wright, from the Community

Get

Template

Cavity Wall Insulation Inspection Report - Master v2

This Cavity Wall Insulation inspection report template (Master v2) helps assess and document issues following CWI installations. Record claimant and property details, capture photos, log damp and mould evidence, check DPC height and brickwork condition, and note cavity barriers. Add room humidity and damp meter readings, list affected rooms, and document any alterations since installation. Include health impact notes, borescope findings for each elevation, wall area and cavity volume calculations, insulation type used, and guarantee details such as CIGA or REIGA. Conclude with assessor approval and attach supporting media and certificates.

by Ted Windemer, from the Community

Get

Cavity Wall Insulation Post Inspection

About author

You might also like

Dyson Cavity Wall Extraction Report

Post Extraction and Cavity Wall Survey Checklist

Post Extraction and Cavity Wall Survey

Cavity Wall Insulation Inspection Report - Master v2

You might also like

Dyson Cavity Wall Extraction Report

Post Extraction and Cavity Wall Survey Checklist

Post Extraction and Cavity Wall Survey

Cavity Wall Insulation Inspection Report - Master v2