Template

Construction Site Safety Inspection CDM

by Positive Safety Solutions, from the Community

This CDM construction site safety inspection checklist helps supervisors and contractors verify compliance across the project life cycle. It covers site setup, access and egress, vehicle and plant movements, documentation such as Construction Phase Plan, F10 and RAMS, fire risk controls, alarms and extinguishers, first aid, permits to work, welfare facilities, housekeeping and waste, PPE, lighting and storage, COSHH and spill response, slips and trips, weather controls, asbestos procedures, noise and manual handling, electrical safety, and comprehensive work at height measures including scaffolds, towers, MEWPs and ladders. It also addresses temporary works, groundworks and excavations, lifting operations and cranes, demolition, water hazards and drowning prevention, and confined space entry with rescue arrangements.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
CDM Health and Safety Inspection Checklist
This CDM health and safety inspection template helps construction teams audit compliance with CDM 2015. It covers site-wide controls, security and traffic management, PPE and emergency procedures, fire safety, existing and overhead services, electrical safety, working at height (ladders, scaffolds, MEWPs), lifting operations, mobile plant and vehicles, machinery and tools, chemicals and COSHH, asbestos, demolition and deconstruction, structural stability, excavations and groundworks, confined spaces, dust, noise and vibration, manual handling, temporary works, and site documentation (F10, HSE poster, CPP, RAMS, permits, registers). Welfare facilities and good practice notes are included, with conclusions and recommendations.
by Anna Nicholls, from the Community
Downloads: 10+
Get
Template
Construction Site Audit Template
This construction site audit template helps teams assess compliance and safety across the site. Sections cover site documentation, inductions and RAMS, welfare and first aid, incident reporting, fire precautions and emergency procedures, PPE, site security and hoardings, access and traffic management, electrical systems, housekeeping and storage, and comprehensive work at height controls including scaffolds, towers, ladders, MEWPs and netting. It also verifies plant and machinery safeguards, occupational health risks such as dust, noise, vibration and manual handling, demolition and excavation safety, temporary works, asbestos and confined space controls, workforce competence and training, and environmental protections including COSHH, run off, spill response and waste. Conclude with sign off and close out actions.
by James Martin Donnelly, from the Community
Downloads: 0
Get
Template
CDM and Health and Safety Inspection Template
This construction site checklist helps teams assess compliance with the UK Construction Design and Management Regulations 2015 and core health and safety controls. Sections cover site security, traffic management, inductions, PPE, fire safety, existing services, underground and overhead services, plant and equipment, lifting operations, working at height, ladders, scaffolds, mobile elevating work platforms, specialist access, chemicals and COSHH, asbestos, demolition, structural stability, excavations and groundworks, confined spaces, dust, noise, vibration, manual handling, temporary works, and welfare. It also prompts review of key documentation including F10 notification, construction phase plan, RAMS, permits to work, registers, tool box talks, and insurance. Use it to identify hazards, verify controls, assign corrective actions, and track closeout.
by Anna Nicholls, from the Community
Downloads: 10+
Get
Template
Contractor Compliance Inspection Checklist
This contractor compliance inspection template helps verify that suppliers and contractors meet site safety and legal requirements on construction projects. It covers welfare facilities, site documentation such as RAMS and COSHH, inductions and training records, permits to work including hot works, isolation and electrical, work at height controls, scaffolding and MEWPs, PPE and RPE fit testing, excavations and CAT and Genny scans, confined space entry and rescue, lifting operations and LOLER, traffic and pedestrian management, access and egress, fire safety and first aid, and environmental controls including waste and spill response.
by Paul Turpin, from the Community
Downloads: 0
Get

Construction Site Safety Inspection CDM

About author

You might also like

CDM Health and Safety Inspection Checklist

Construction Site Audit Template

CDM and Health and Safety Inspection Template

Contractor Compliance Inspection Checklist

You might also like

CDM Health and Safety Inspection Checklist

Construction Site Audit Template

CDM and Health and Safety Inspection Template

Contractor Compliance Inspection Checklist