Template

Johnson Controls Pre-Job Checklist

by Trenton Berner, from the Community

This Johnson Controls pre-job checklist helps crews prepare safely before work begins. It captures site details, work order, location, supervisor, and job description, then walks teams through key pre-start checks: job activities (lockout, working near live electrical, confined space, working at heights), environmental hazards (wind chill, airborne particles, vapors, heat stress, noise, lighting), body hazards (fall potential, pinch points, electric shock, slips and trips, flying particles, manual lifting, sharp objects, falling objects), and chemical hazards (MSDS review, system under pressure, burns, skin/eye irritation, inhalation, radiation). It also verifies communications (working alone, contact person), equipment readiness (lifts, forklifts, cranes, rigging, tools, scaffolds, ladders), safety barriers and signage, and emergency equipment (fire extinguisher, eyewash, safety shower, muster point). Includes space for comments.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
Pre Work Risk Assessment
This pre work risk assessment checklist helps teams identify hazards and controls before starting any job. It covers routine maintenance, emergency breakdowns, and commissioning activities, with prompts for permits to work, supplementary risk assessments, and attachments. Hazards addressed include vehicle movement, dust, noise, slips and trips, falling objects, manual handling, working at height, electrical panel and device work, live plant work, and use of ladders, tools, and trailing leads. The checklist also captures PPE requirements such as hard hats, safety footwear, RPE, eye and hearing protection, and includes LOTO readiness and sign off by the service engineer and site representative.
by mohamed mosalam, from the Community
Downloads: 0
Get
Template
Pre-Task Assessment Checklist
Use this pre-task assessment to verify scope of work details, confirm PPE requirements, and flag potential hazards before starting preventive maintenance or work orders. Checklist items include arc flash and fall protection needs, heat stress, overhead work, sharp edges, slips, chemical inhalation, energized equipment, spills and leaks, burns, insects, weather, and hot work permits. General safety checks cover eyewash availability, tool inspections, barricades and signage, lockout tagout, fire extinguishers, GFCI outlets, ladder tags, and confined space considerations. Capture dates, vendor and work order numbers, and signatures to document readiness.
by Russell Rodgers, from the Community
Downloads: 0
Get
Template
JTC Electric Job Start Checklist
This Electrical Job Start Checklist helps crews and supervisors confirm critical safety and compliance steps before commencing work. It covers training and supervision, tool condition, PPE requirements, working at heights, roof pitch, and harness checks. It includes verification of isolations and lockout tagout, confirmation that work is not live, and licenses for EWP, scissor lifts, or forklifts. The checklist also prompts checks for asbestos, dangerous goods, slips, trips, and falling object risks, plus documentation and signatures. Use it to communicate hazards and send completed records to administration.
by Jason Lazzarini, from the Community
Downloads: 0
Get
Template
Pre-Job Safety and Hazard Analysis and Hot Work
This pre-job safety and hazard analysis checklist helps teams plan and execute hot work and other high-risk tasks in a manufacturing environment. It covers job information, PPE requirements, work area preparation, and a Take 5 risk review to identify hazards such as electrical, mechanical, fire, chemical exposure, confined space, and working at heights. The template includes permit controls for confined space, lockout tag out, hot work, high voltage, and hazard communication. It guides fire watch assignments, start and end time logging, and post-work monitoring, with prompts for emergency contacts and documentation.
by Edwin Horna, from the Community
Downloads: 20+
Get

Johnson Controls Pre-Job Checklist

About author

You might also like

Pre Work Risk Assessment

Pre-Task Assessment Checklist

JTC Electric Job Start Checklist

Pre-Job Safety and Hazard Analysis and Hot Work

You might also like

Pre Work Risk Assessment

Pre-Task Assessment Checklist

JTC Electric Job Start Checklist

Pre-Job Safety and Hazard Analysis and Hot Work