Template

JCD-QMS-QAC-020 Fire Doors Inspection Checklist

by Alex Dobra, from the Community

10+

This JCD-QMS-QAC-020 Fire Doors Inspection template guides site supervisors and managers through compliant fire door installation and verification. It covers Stage 1 and Stage 2 activities, from frame alignment, fixings, tolerances and trimming, to sealants, signage and drop seals. It includes fields to record door details, ratings, manufacturers, installers and sign-offs for both JC Drylining and the main contractor, and references BS 8214:2016, BS 476:2022 and BS EN 1366-4:2021.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Plastering Quality Checklist - JCD-QMS-QAC-014
Use this JCD-QMS-QAC-014 Plastering checklist to control quality on site from plasterboard preparation through application and making good. Verify joints are taped, angle and edge beads are plumb, skim coats applied, electrical boxes and skirting lines are clean, and areas are left tidy. Capture comments, record dates, and obtain sign-off from both JC Drylining Ltd and the main contractor to document compliance and workmanship quality.
by Alex Dobra, from the Community
Downloads: 0
Get
Template
Fire Risk Assessment Report Template
This Fire Risk Assessment Report template helps organizations evaluate fire hazards and manage life safety across their premises. It guides inspections of ignition sources, electrical safety, cooking and heating equipment, combustible storage, and contractor controls. It covers means of escape, assembly points, fire doors, compartmentation, and exit maintenance. The checklist includes verification of fire alarm systems, emergency lighting, signage and notices, and firefighting equipment, with references to BS 5839, BS 5266, and BS 5306. It also addresses fire safety management, staff training, evacuation drills, liaison with fire services, and firefighter access considerations.
by Wayne Moffatt, from the Community
Downloads: 30+
Get
Template
Fire Door Inspection Checklist
This fire door inspection checklist from Burke Fire Doors helps assess compliance and safety for timber fire doors. It guides inspectors through door identification, fire ratings, and dimensional tolerances, including margins at hinge, latch, head, and threshold. Sections cover door frame condition, timber requirements for FD30/FD60, door stops, joints, architrave, and intumescent seals. Door leaf checks include edges, alignment, and signage. Operational tests confirm smooth closing and secure latching. Hardware reviews address closers, hinges, locks, CE/EN markings, intumescent protection, and flush bolts. Glazing checks include vision panel dimensions, glass stamping, beads, and fire glazing intumescent. Fire mastic inspections for varying gap sizes are included. The checklist aligns with BS 8214 guidance to support building safety and compliance.
by Shane Breslin, from the Community
Downloads: 0
Get
Template
Fire Door Inspection at Bouverie Place
Use this fire door inspection template for Bouverie Place to conduct visual, non intrusive checks of communal and apartment doors. Verify certification and ratings, record leaf and frame measurements, assess gaps, hinges, locks, self closers, intumescent and smoke seals, and glazing. Note defects, capture photos, assign corrective actions, and confirm closure performance. Built around best practice and BS 8214 guidance, this checklist helps property managers and contractors maintain fire integrity and produce clear, exportable reports for compliance and life safety.
by Ryan Carroll, from the Community
Downloads: 0
Get

Plastering Quality Checklist - JCD-QMS-QAC-014

Use this JCD-QMS-QAC-014 Plastering checklist to control quality on site from plasterboard preparation through application and making good. Verify joints are taped, angle and edge beads are plumb, skim coats applied, electrical boxes and skirting lines are clean, and areas are left tidy. Capture comments, record dates, and obtain sign-off from both JC Drylining Ltd and the main contractor to document compliance and workmanship quality.

by Alex Dobra, from the Community

Get

Template

Fire Risk Assessment Report Template

This Fire Risk Assessment Report template helps organizations evaluate fire hazards and manage life safety across their premises. It guides inspections of ignition sources, electrical safety, cooking and heating equipment, combustible storage, and contractor controls. It covers means of escape, assembly points, fire doors, compartmentation, and exit maintenance. The checklist includes verification of fire alarm systems, emergency lighting, signage and notices, and firefighting equipment, with references to BS 5839, BS 5266, and BS 5306. It also addresses fire safety management, staff training, evacuation drills, liaison with fire services, and firefighter access considerations.

by Wayne Moffatt, from the Community

30+

Get

Template

Fire Door Inspection Checklist

This fire door inspection checklist from Burke Fire Doors helps assess compliance and safety for timber fire doors. It guides inspectors through door identification, fire ratings, and dimensional tolerances, including margins at hinge, latch, head, and threshold. Sections cover door frame condition, timber requirements for FD30/FD60, door stops, joints, architrave, and intumescent seals. Door leaf checks include edges, alignment, and signage. Operational tests confirm smooth closing and secure latching. Hardware reviews address closers, hinges, locks, CE/EN markings, intumescent protection, and flush bolts. Glazing checks include vision panel dimensions, glass stamping, beads, and fire glazing intumescent. Fire mastic inspections for varying gap sizes are included. The checklist aligns with BS 8214 guidance to support building safety and compliance.

by Shane Breslin, from the Community

Get

Template

Fire Door Inspection at Bouverie Place

Use this fire door inspection template for Bouverie Place to conduct visual, non intrusive checks of communal and apartment doors. Verify certification and ratings, record leaf and frame measurements, assess gaps, hinges, locks, self closers, intumescent and smoke seals, and glazing. Note defects, capture photos, assign corrective actions, and confirm closure performance. Built around best practice and BS 8214 guidance, this checklist helps property managers and contractors maintain fire integrity and produce clear, exportable reports for compliance and life safety.

by Ryan Carroll, from the Community

Get

JCD-QMS-QAC-020 Fire Doors Inspection Checklist

About author

You might also like

Plastering Quality Checklist - JCD-QMS-QAC-014

Fire Risk Assessment Report Template

Fire Door Inspection Checklist

Fire Door Inspection at Bouverie Place

You might also like

Plastering Quality Checklist - JCD-QMS-QAC-014

Fire Risk Assessment Report Template

Fire Door Inspection Checklist

Fire Door Inspection at Bouverie Place