Template

Internal Contracts Checklist for I and C

by Michael Purkess, from the Community

10+

Standardize internal inspections across construction projects with a practical checklist. Covers paperwork and documentation, haulage vehicle safety posts, precast dock levellers, yard retaining walls, beams and prowall installation, grout and drypack checks, offsets and dowels, equipment checks for works vans, PPE compliance, housekeeping, customer comments, and final sign off. Designed for I and C contract managers overseeing precast work, safety, and site quality.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

BCP Precast Panel audit

This document provides a detailed audit checklist for precast panel installation in construction projects. It covers essential inspection points including panel setup verification, shim height measurements, dowel positioning, quality assessments both before and after lifting, dimensional checks, and proper propping installation. The checklist ensures compliance with design specifications and safety standards while maintaining quality control throughout the installation process. It includes requirements for photographic documentation and final BCP signoff, making it an essential tool for construction supervisors and quality control personnel. The template serves as a systematic approach to maintaining installation standards and documenting the proper execution of precast panel installations.

by Jess Parker, from the Community

40+

Get

Template

Dianella Insitu and Precast Walls and Columns

This construction checklist supports inspections for insitu and precast walls and columns on the Dianella project. It guides checks for formwork cleaning and propping, dimensions and thickness, penetrations and cast ins, steel reinforcement placement and cover, laps and corners, bar chairs, movement joints, concrete strength and slump, and curing. It also covers waterproofing to retaining walls, column ties and starters, prop installation and removal records, weld plates, grouting of dowels, joints and panel undersides, and final sealant. Use it to capture photos, verify engineers instructions, and document compliance throughout concrete works.

by Hanssen Reports, from the Community

10+

Get

Template

Precast Quality Housekeeping Spot Audit

Use this precast housekeeping spot audit to evaluate production and yard practices across multiple areas. Inspect documentation, mould surfaces and fittings, concrete checks, cast-in fittings, reinforcement, and post-cast identification. Review yard stacking and loading, loaded trailer inspections, remedial work, and final delivery quality. Capture best practices, record issues, assign actions, and score performance to drive continuous improvement.

by Phil Taylor, from the Community

20+

Get

Template

Pre-Start Site Inspection Checklist V2

Use this pre-start site inspection checklist to confirm site readiness before installation. Review bases and headroom, identify obstructions, confirm safe access for vehicles and crane setup, and verify ground preparation. Check for issues that could affect the program or method of work, note environmental considerations such as noise and vibration, and ensure welfare facilities are acceptable. Ideal for contract managers overseeing precast installations and general construction works, this template standardizes pre-job checks and records comments and completion details.

by Michael Purkess, from the Community

30+

Get

Template

Insitu and Precast Walls and Columns Checklist

Use this practical construction checklist to plan and inspect insitu and precast walls and columns. It covers shutter preparation and propping, thickness checks, penetrations and cast-ins, steel reinforcement placement, vertical and starter bars, header beam reinforcement, laps, steps and corners, cover and bar chairs, movement joints, concrete strength and slump, no added water, and curing. For insitu columns, confirm dimensions, base angles, ties, lap lengths, and curing. For precast elements, verify backing rod, dowel sizes, props, weld plates, grouting of dowels, joints and undersides, and sealant application. Supports consistent quality and compliance on site.

by Belinda Hanssen, from the Community

Get

Template

Precast Quality Spot Check Audit Report

This precast quality spot check audit report helps teams verify concrete sampling and testing, equipment readiness, production bay conditions, and finished unit quality. It covers cube mould preparation, cube crushing for bed release, casting machine checks, production and post production inspections, and yard processes including stacking, saws, trailer loading, and final delivery checks. Use it to document responsibilities, record measurements, highlight issues for sign off, and feed results back to quality control for continuous improvement and compliance.

by Michael Purkess, from the Community

30+

Get