Skip to content
SafetyCulture
Template

Insulation and Vapour Barrier Inspection Checklist

by District of Squamish, from the Community

Downloads: 30+
Get this template

Use this checklist to inspect insulation and vapour barrier installation before covering work. Verify framing notes, presence of exterior cladding or approved weather protection, any new notching or cutting of framing, sealing of penetrations, hose bib frost protection, caulking around windows and doors, fire stopping, plate sealing, attic hatch sizing, protection of vents and fireplaces, and that ducting in the attic is insulated and supported. Confirm crawlspace conditioning, foundation rigid insulation at minimum R12 from top of wall to 18 inches below grade, and that access points are sealed. Record inspection status, re-inspection needs, inspector name, date, and signature.

With SafetyCulture you can

Digitize any process, procedure or policy
Eliminate mistakes made by paper-based processes
Create and share professional reports instantly
Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy
Eliminate mistakes made by paper-based processes
Create and share professional reports instantly
Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.