Template

Heggem-Lundquist Drywall Finishing QC

Comprehensive drywall finishing quality control checklist for taping inspections by Heggem-Lundquist. Confirm updated drawings and specs, maintain 50 F minimum temperatures, verify beads are plumb and in plane, float cornerbeads and 093 control joints, finish to floor at exposed areas, check jambs for chatter marks, inspect and sand skim coat for level 5 finishes, clean electrical boxes and frames, float patches, remove debris, and walk the site with the GC superintendent.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Taping Prior to Primer Quality Control Checklist

This drywall finishing quality control checklist helps crews verify taping and surface preparation before primer. It covers clearing rooms of stored materials, floating cornerbeads and 093 control joints, finishing walls to floor at roll-up or exposed flooring areas, hand-sanding inside corners, and removing chatter marks. It also guides cleaning excess mud from walls, frames, and electrical boxes, ensuring patches are floated and primed by the painter, and confirming door and window frames are free of compound. Includes foreman and QC sign-off with notes and media capture.

by Michael Walker, from the Community

Get

Template

Taping Quality Control Checklist

Use this drywall taping quality control checklist to verify trims are plumb and in plane, cornerbeads and control joints are floated, walls are finished to floor, inside corners are hand sanded, and mud has no pin holes or chatter marks. Confirm frames and electrical boxes are clean, floors are scraped and swept, and adequate temperature and ventilation are maintained before primer. Ideal for site foremen and QC teams to standardize finishing checks.

by Michael Walker, from the Community

10+

Get

Template

Drywall Quality Control Checklist

Use this drywall quality control checklist to review the quality of drywall installation. This checklist inspects for drywall nailing and screwing, tapings and corner beads. Use and customize this checklist according to your inspection needs.

by SafetyCulture

100+

Get

Template

General Drywall Inspection Checklist

A drywall inspection checklist is a tool used to guide inspectors in evaluating drywall installation. Use this checklist to identify any issues like misaligned holes for electrical boxes, drywall screws driven too far and other non-compliant items.

by SafetyCulture

200+

Get

Template

Heggem-Lundquist Site Safety Assessment

Use this comprehensive site safety assessment to evaluate construction projects against essential safety requirements. The checklist covers general site conditions and signage, emergency provisions, housekeeping, hazard communication, and electrical safeguards. It includes detailed sections on personal protective equipment, ladders and stairs, scaffolds and scissor lifts, working at heights and fall protection, hand and power tools, and excavation safeguards. Additional modules address cranes and rigging practices, aerial lifts, and heavy equipment operations. The assessment aligns with OSHA and MUTCD guidance and supports planning with JHA or AHA documentation, traffic control plans, and permitting, helping crews identify hazards, verify controls, and improve job site safety performance.

by Manuel Agrees, from the Community

10+

Get

Template

Heggem-Lundquist Painting QAQC Checklist

This painting QAQC checklist supports quality control on construction projects. It guides inspectors through pre-application checks, substrate preparation, and protection of adjacent surfaces, then covers spray painting and brush-and-roll steps. Items include verifying drawings and approvals, ensuring MEP work is complete, checking temperature and moisture, controlling overspray, confirming product and MIL thickness, and validating pH on concrete. It prompts uniform finish checks, protection removal, defect walks prior to architect punch lists, GC walkthroughs, and thorough cleanup.

by Alyssa Takeshims, from the Community

Get