Template

Etac Equipment Inspection Report

by Wade Weidenbohm, from the Community

The Etac Equipment Inspection Report is a practical checklist for inspecting fall protection gear used in work at heights. Review harnesses, lanyards, connectors, ropes, slings, wire rope, labels, and portable roof anchors. Capture serial numbers, manufacturer dates, removal-from-service dates, and pass or fail outcomes. Document issues such as UV damage, corrosion, bent or cracked hardware, stitching wear, sticky gates, and poor function. Add photo evidence and signatures, and record client/site details to support safety and regulatory compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Fall Protection Equipment Inspection Report
Use this equipment inspection report to evaluate fall protection gear and document compliance. The checklist covers harnesses, lanyards, buckles, D-rings, plastic keepers, and connectors, with checks for damage, missing parts, deployment, UV exposure, cracks, distortion, sharp edges, corrosion, sticky gates, dirt/grease buildup, and function. Include serial numbers, manufacturer/date, removal-from-service dates, and labels. Inspect wire rope, shock absorbers, stitching, rope, and webbing. Add photo evidence, mark pass or fail, and capture signatures. Designed to support OSHA-compliant safety checks across worksites.
by Emergency Training & Consulting, from the Community
Downloads: 10+
Get
Template
Fall Equipment Inspection Checklist
Use this fall protection equipment inspection checklist to evaluate harnesses, lanyards, lifelines, snap hooks, D-rings, buckles, stitching, and labels for wear, damage, corrosion, heat or chemical exposure, and compliance with OSHA and CSA markings. Record manufacturer and purchase dates, unique ID, and in service dates, note defects and comments, and determine overall disposition as accepted or rejected. Capture inspector name, location, and inspection date to maintain consistent, auditable working at heights safety records.
by Kevin Bernier, from the Community
Downloads: 0
Get
Template
Harness, Lanyard and Pole Strap Inspection
This checklist supports pre-use and periodic inspections of fall protection equipment, including safety harnesses, lanyards, and pole straps. It guides users to record identification details, manufacturer and serial numbers, manufacture and withdrawal dates, and next inspection dates. Inspect hardware such as D-rings and buckles for corrosion, cracks, or distortion; check webbing and stitching for fraying, cuts, burns, chemical damage, or pulled stitches. Mark pass or remove-from-service outcomes and capture notes and corrective actions to maintain compliance and worker safety.
by Erika Pitout, from the Community
Downloads: 0
Get
Template
LES Harness Inspection Form
Use this LES Harness Inspection Form to document fall protection PPE checks before each use. Record client/site details, date, and equipment manufacturers for harnesses, lanyards, lifelines, and anchors. Inspect stitching, webbing, and connectors for cuts, fraying, distortion, corrosion, heat or chemical damage, and excessive wear. Verify lanyard snap-hooks and carabiners operate correctly, check webbing/rope/cable condition, and confirm shock absorbers are intact with no deployment. Review lifeline ropes and connectors to the same standards, removing any failed items from service. Capture inspector details and signature to confirm compliance and readiness for safe work at heights.
by J Stevenson Jr., from the Community
Downloads: 30+
Get

Fall Protection Equipment Inspection Report

Use this equipment inspection report to evaluate fall protection gear and document compliance. The checklist covers harnesses, lanyards, buckles, D-rings, plastic keepers, and connectors, with checks for damage, missing parts, deployment, UV exposure, cracks, distortion, sharp edges, corrosion, sticky gates, dirt/grease buildup, and function. Include serial numbers, manufacturer/date, removal-from-service dates, and labels. Inspect wire rope, shock absorbers, stitching, rope, and webbing. Add photo evidence, mark pass or fail, and capture signatures. Designed to support OSHA-compliant safety checks across worksites.

by Emergency Training & Consulting, from the Community

10+

Get

Template

Fall Equipment Inspection Checklist

Use this fall protection equipment inspection checklist to evaluate harnesses, lanyards, lifelines, snap hooks, D-rings, buckles, stitching, and labels for wear, damage, corrosion, heat or chemical exposure, and compliance with OSHA and CSA markings. Record manufacturer and purchase dates, unique ID, and in service dates, note defects and comments, and determine overall disposition as accepted or rejected. Capture inspector name, location, and inspection date to maintain consistent, auditable working at heights safety records.

by Kevin Bernier, from the Community

Get

Template

Harness, Lanyard and Pole Strap Inspection

This checklist supports pre-use and periodic inspections of fall protection equipment, including safety harnesses, lanyards, and pole straps. It guides users to record identification details, manufacturer and serial numbers, manufacture and withdrawal dates, and next inspection dates. Inspect hardware such as D-rings and buckles for corrosion, cracks, or distortion; check webbing and stitching for fraying, cuts, burns, chemical damage, or pulled stitches. Mark pass or remove-from-service outcomes and capture notes and corrective actions to maintain compliance and worker safety.

by Erika Pitout, from the Community

Get

Template

LES Harness Inspection Form

Use this LES Harness Inspection Form to document fall protection PPE checks before each use. Record client/site details, date, and equipment manufacturers for harnesses, lanyards, lifelines, and anchors. Inspect stitching, webbing, and connectors for cuts, fraying, distortion, corrosion, heat or chemical damage, and excessive wear. Verify lanyard snap-hooks and carabiners operate correctly, check webbing/rope/cable condition, and confirm shock absorbers are intact with no deployment. Review lifeline ropes and connectors to the same standards, removing any failed items from service. Capture inspector details and signature to confirm compliance and readiness for safe work at heights.

by J Stevenson Jr., from the Community

30+

Get

Etac Equipment Inspection Report

About author

You might also like

Fall Protection Equipment Inspection Report

Fall Equipment Inspection Checklist

Harness, Lanyard and Pole Strap Inspection

LES Harness Inspection Form

You might also like

Fall Protection Equipment Inspection Report

Fall Equipment Inspection Checklist

Harness, Lanyard and Pole Strap Inspection

LES Harness Inspection Form