Template

Culvert Detailed Visual Inspection Report

by John Ferreira, from the Community

20+

This Level 2 culvert visual inspection checklist helps inspectors document site access, culvert type and materials, dimensions, length and barrels, flow direction, and environmental conditions. Record defects across headwalls, wing walls, aprons and barrels, rate severity, capture photos, and prescribe monitoring, routine maintenance, minor or major repairs, and relining. Includes options for standard and specific works to support reliable drainage asset management.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Culverts Level 1 Visual Inspection Report
Use this Level 1 culvert visual inspection report template to record road, culvert and channel data, assess inlet and outlet condition, hydraulics, scouring, blockages and sediment, and rate severity. Capture material type and component condition, vulnerability to flooding, debris, corrosion and sea level rise, plus safety elements, photos and actions. Summarize issues, set management requirements and sign off.
by sam colwell, from the Community
Downloads: 0
Get
Template
ITP-05: Install Drainage Culvert
Use this Inspection and Test Plan (ITP) checklist to guide and verify drainage culvert installation. It covers site marking, materials approval, trench excavation and benching, bedding compaction, culvert placement and jointing, grade checks, backfilling and compaction methods, and inlet/outlet clearance, with photo evidence and sign-off fields for supervisors and clients.
by NEMA Projects, from the Community
Downloads: 30+
Get
Template
SWDC Bridge and Culvert Inspection
This SWDC bridge and culvert inspection checklist helps asset managers and inspectors record key details and assess condition across all major elements. Capture general info such as structure name, road, dimensions, culvert type, construction year, inspector, and location. Evaluate superstructure and secondary elements, including load-carrying components, transverse beams, and deck. Review load-bearing substructure elements like foundations and head walls, plus durability items such as drainage, movement joints, and coatings. Check safety elements, including access, guardrails, and surfacing. Assess waterway conditions—river bed, aprons, upstream/downstream, scour, and banks—and retaining elements like wing and retaining walls and embankments. Log other approach elements, signage, lighting, and services. For each finding, add comments, suggested remedial works, priorities, estimated costs, and attach relevant photos. Conclude with maintenance recommendations, follow-up on previous actions, and any NZTA database updates.
by Dion Collier, from the Community
Downloads: 20+
Get
Template
Culvert Pre-Survey Checklist
Use this culvert pre-survey template to plan and document onsite waterways work before maintenance. Record site access, address and GPS, priority and nature of works, confined space classification and rescue plans, inlet and outlet measurements (height, width, water depth), silt depth, materials, photos, access issues, bridges and restrictions, traffic management, land type, overhead services, and environmental and pollution controls. Summarize findings, note resources required, and sign off to complete the report.
by Matt Barnett, from the Community
Downloads: 20+
Get

Culverts Level 1 Visual Inspection Report

Use this Level 1 culvert visual inspection report template to record road, culvert and channel data, assess inlet and outlet condition, hydraulics, scouring, blockages and sediment, and rate severity. Capture material type and component condition, vulnerability to flooding, debris, corrosion and sea level rise, plus safety elements, photos and actions. Summarize issues, set management requirements and sign off.

by sam colwell, from the Community

Get

Template

ITP-05: Install Drainage Culvert

Use this Inspection and Test Plan (ITP) checklist to guide and verify drainage culvert installation. It covers site marking, materials approval, trench excavation and benching, bedding compaction, culvert placement and jointing, grade checks, backfilling and compaction methods, and inlet/outlet clearance, with photo evidence and sign-off fields for supervisors and clients.

by NEMA Projects, from the Community

30+

Get

Template

SWDC Bridge and Culvert Inspection

This SWDC bridge and culvert inspection checklist helps asset managers and inspectors record key details and assess condition across all major elements. Capture general info such as structure name, road, dimensions, culvert type, construction year, inspector, and location. Evaluate superstructure and secondary elements, including load-carrying components, transverse beams, and deck. Review load-bearing substructure elements like foundations and head walls, plus durability items such as drainage, movement joints, and coatings. Check safety elements, including access, guardrails, and surfacing. Assess waterway conditions—river bed, aprons, upstream/downstream, scour, and banks—and retaining elements like wing and retaining walls and embankments. Log other approach elements, signage, lighting, and services. For each finding, add comments, suggested remedial works, priorities, estimated costs, and attach relevant photos. Conclude with maintenance recommendations, follow-up on previous actions, and any NZTA database updates.

by Dion Collier, from the Community

20+

Get

Template

Culvert Pre-Survey Checklist

Use this culvert pre-survey template to plan and document onsite waterways work before maintenance. Record site access, address and GPS, priority and nature of works, confined space classification and rescue plans, inlet and outlet measurements (height, width, water depth), silt depth, materials, photos, access issues, bridges and restrictions, traffic management, land type, overhead services, and environmental and pollution controls. Summarize findings, note resources required, and sign off to complete the report.

by Matt Barnett, from the Community

20+

Get

Culvert Detailed Visual Inspection Report

About author

You might also like

Culverts Level 1 Visual Inspection Report

ITP-05: Install Drainage Culvert

SWDC Bridge and Culvert Inspection

Culvert Pre-Survey Checklist

You might also like

Culverts Level 1 Visual Inspection Report

ITP-05: Install Drainage Culvert

SWDC Bridge and Culvert Inspection

Culvert Pre-Survey Checklist