Template

Welding Safety Checklist for Pipelines and Coatings

by Jennifer Nazar, from the Community

20+

This welding safety checklist supports pipeline and coating operations. Verify compressed gas cylinders are secured and marked, tools and hoses are in good condition, and torches have flashback arrestors. Confirm PPE and eye protection, review hot work permits, assign a fire watch, and stage extinguishers. Use it to document inspections, comments, and signatures for site compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Hot Works Safety Inspection Checklist
Ensure safe welding, cutting, and grinding with this hot works inspection checklist. Verify SWMS and permit approvals, confirm tested fire extinguishers on hand, and ensure sparks and hot metal are contained. Check PPE compliance and double eye protection, proper welding earth placement, and the use of welding screens and fire blankets. Review safe routing of leads and hoses, grinder use per procedure, and collection of welding rod stubs. Inspect gas cylinders are secured with operative gauges, flashback arrestors, and sound hoses. Barricade areas below oxy cutting, remove combustibles, and keep leads off machines. Document weekly inspections and capture findings, names, dates, and signatures for compliance.
by Evan Downie, from the Community
Downloads: 20+
Get
Template
Gas Welding and Cutting Inspection Checklist
This gas welding and cutting inspection template helps teams assess key safety controls for oxyfuel welding and cutting. Verify cylinders are secured and stored correctly, check for damage to cylinder valves and guards, inspect regulators and adjusting screws, confirm flashback arrestors are fitted at the regulator and torch, and test torch valves, hoses, and nozzle condition. The checklist also covers combustible materials, housekeeping in the welding bay, and removal of personal items. Use it to standardize inspections, reduce hazards, and support compliance with site safety procedures.
by Ria Dercksen, from the Community
Downloads: 10+
Get
Template
Hot Work Inspection: Welding, Cutting, Grinding
This workplace inspection checklist helps teams manage hot work risks for welding, cutting, and grinding. It covers permit to work, fire prevention and firewatch, PPE and double eye protection, barricades and signage, housekeeping, ventilation and dust controls, gas cylinders and hoses, welding machines and grinders, and pre-use inspections. Use it to document findings, assign actions, and maintain compliance across construction and maintenance sites.
by Henno Ferreira, from the Community
Downloads: 30+
Get
Template
Welding Safety Inspection
This Welding Safety Inspection template helps teams assess safe welding practices on site. Use it to verify cylinder caps are fitted, cylinders are stored and used upright, valves are shut when work is complete, cylinders are secured against tipping, and appropriate eye protection is worn. The template supports hazard identification, compliance with site safety requirements, and consistent record-keeping. Adapt the checklist to your jobsite or workshop needs.
by Ken Earnest, from the Community
Downloads: 20+
Get

Hot Works Safety Inspection Checklist

Ensure safe welding, cutting, and grinding with this hot works inspection checklist. Verify SWMS and permit approvals, confirm tested fire extinguishers on hand, and ensure sparks and hot metal are contained. Check PPE compliance and double eye protection, proper welding earth placement, and the use of welding screens and fire blankets. Review safe routing of leads and hoses, grinder use per procedure, and collection of welding rod stubs. Inspect gas cylinders are secured with operative gauges, flashback arrestors, and sound hoses. Barricade areas below oxy cutting, remove combustibles, and keep leads off machines. Document weekly inspections and capture findings, names, dates, and signatures for compliance.

by Evan Downie, from the Community

20+

Get

Template

Gas Welding and Cutting Inspection Checklist

This gas welding and cutting inspection template helps teams assess key safety controls for oxyfuel welding and cutting. Verify cylinders are secured and stored correctly, check for damage to cylinder valves and guards, inspect regulators and adjusting screws, confirm flashback arrestors are fitted at the regulator and torch, and test torch valves, hoses, and nozzle condition. The checklist also covers combustible materials, housekeeping in the welding bay, and removal of personal items. Use it to standardize inspections, reduce hazards, and support compliance with site safety procedures.

by Ria Dercksen, from the Community

10+

Get

Template

Hot Work Inspection: Welding, Cutting, Grinding

This workplace inspection checklist helps teams manage hot work risks for welding, cutting, and grinding. It covers permit to work, fire prevention and firewatch, PPE and double eye protection, barricades and signage, housekeeping, ventilation and dust controls, gas cylinders and hoses, welding machines and grinders, and pre-use inspections. Use it to document findings, assign actions, and maintain compliance across construction and maintenance sites.

by Henno Ferreira, from the Community

30+

Get

Template

Welding Safety Inspection

This Welding Safety Inspection template helps teams assess safe welding practices on site. Use it to verify cylinder caps are fitted, cylinders are stored and used upright, valves are shut when work is complete, cylinders are secured against tipping, and appropriate eye protection is worn. The template supports hazard identification, compliance with site safety requirements, and consistent record-keeping. Adapt the checklist to your jobsite or workshop needs.

by Ken Earnest, from the Community

20+

Get

Welding Safety Checklist for Pipelines and Coatings

About author

You might also like

Hot Works Safety Inspection Checklist

Gas Welding and Cutting Inspection Checklist

Hot Work Inspection: Welding, Cutting, Grinding

Welding Safety Inspection

You might also like

Hot Works Safety Inspection Checklist

Gas Welding and Cutting Inspection Checklist

Hot Work Inspection: Welding, Cutting, Grinding

Welding Safety Inspection