Template

Beech and Holm Court Remedial Works EPDM Quality Plan

by Paul Chiritoi, from the Community

This contractor proposal outlines a step by step quality plan and hold points for installing EPDM membrane to floor slabs at Beech and Holm Court. It details pre start checks, environmental conditions with a minimum of 5 degrees C and relative humidity not less than 40 percent, surface preparation with ARBO AF S primer, adhesive bead application, and pressing the membrane with rollers to ensure full contact. The scope is limited to clear floor slab zones, excluding areas above or below window pods, and requires sign off by the SCF Manager or QA Manager.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
EPDM Floor Slab Remedial Works Quality Plan
This construction quality plan outlines the steps and hold points for EPDM membrane works at floor slab zones. It includes pre-start checks for substrate condition, temperature minimums and relative humidity, surface preparation with ARBO AF S primer, adhesive application, and pressing the EPDM strip for full contact. The guide emphasizes limiting application to clear floor slab zones and excluding areas above or below window pods. QA hold points and sign-off by the SCF or QA Manager are included to verify compliant, documented remedial works.
by Paul Chiritoi, from the Community
Downloads: 0
Get
Template
Contractor Proposal EPDM Remedial Works Quality Plan
This contractor proposal template covers EPDM installation to a floor slab with a practical quality plan and defined hold points. It outlines pre-start checks, including visual inspection of concrete and masonry, minimum temperature and relative humidity requirements, and surface preparation with ARBO primers and adhesives. Steps detail adhesive application, EPDM placement and rolling, and edge treatment. Scope notes limit application to clear floor slab zones only, excluding areas above or below window pods. Final sign-off is by the site or QA manager.
by Paul Chiritoi, from the Community
Downloads: 0
Get
Template
Contractor Proposal for Curtain Wall EPDM Remedial Works
Use this contractor proposal and quality plan to manage EPDM sealing to curtain wall remedial works. The template covers pre start checks for temperature and humidity, surface preparation for concrete, masonry, and aluminium, approved materials and primers, adhesive application widths, and installation steps. It includes defined hold points, photo evidence, and QA manager sign off to verify workmanship. Ideal for facade teams standardising inspections and documentation on site.
by Paul Chiritoi, from the Community
Downloads: 0
Get
Template
Remedial Works Windows Type 2 and 3 Quality Plan
This template provides a practical quality plan and hold points for remedial works on windows type 2 and 3. It covers preparation and removal of existing EPDM, surface cleaning and priming, adhesive application, and correct sequencing for cills, jambs, and heads, including EPDM to floor slab interfaces. It also outlines bracket and fastener requirements with spacing, torque, and embedment guidance to meet drawings and specifications. Use it to document inspections, photos, and sign offs on site.
by Paul Chiritoi, from the Community
Downloads: 0
Get

EPDM Floor Slab Remedial Works Quality Plan

This construction quality plan outlines the steps and hold points for EPDM membrane works at floor slab zones. It includes pre-start checks for substrate condition, temperature minimums and relative humidity, surface preparation with ARBO AF S primer, adhesive application, and pressing the EPDM strip for full contact. The guide emphasizes limiting application to clear floor slab zones and excluding areas above or below window pods. QA hold points and sign-off by the SCF or QA Manager are included to verify compliant, documented remedial works.

by Paul Chiritoi, from the Community

Get

Template

Contractor Proposal EPDM Remedial Works Quality Plan

This contractor proposal template covers EPDM installation to a floor slab with a practical quality plan and defined hold points. It outlines pre-start checks, including visual inspection of concrete and masonry, minimum temperature and relative humidity requirements, and surface preparation with ARBO primers and adhesives. Steps detail adhesive application, EPDM placement and rolling, and edge treatment. Scope notes limit application to clear floor slab zones only, excluding areas above or below window pods. Final sign-off is by the site or QA manager.

by Paul Chiritoi, from the Community

Get

Template

Contractor Proposal for Curtain Wall EPDM Remedial Works

Use this contractor proposal and quality plan to manage EPDM sealing to curtain wall remedial works. The template covers pre start checks for temperature and humidity, surface preparation for concrete, masonry, and aluminium, approved materials and primers, adhesive application widths, and installation steps. It includes defined hold points, photo evidence, and QA manager sign off to verify workmanship. Ideal for facade teams standardising inspections and documentation on site.

by Paul Chiritoi, from the Community

Get

Template

Remedial Works Windows Type 2 and 3 Quality Plan

This template provides a practical quality plan and hold points for remedial works on windows type 2 and 3. It covers preparation and removal of existing EPDM, surface cleaning and priming, adhesive application, and correct sequencing for cills, jambs, and heads, including EPDM to floor slab interfaces. It also outlines bracket and fastener requirements with spacing, torque, and embedment guidance to meet drawings and specifications. Use it to document inspections, photos, and sign offs on site.

by Paul Chiritoi, from the Community

Get

Beech and Holm Court Remedial Works EPDM Quality Plan

About author

You might also like

EPDM Floor Slab Remedial Works Quality Plan

Contractor Proposal EPDM Remedial Works Quality Plan

Contractor Proposal for Curtain Wall EPDM Remedial Works

Remedial Works Windows Type 2 and 3 Quality Plan

You might also like

EPDM Floor Slab Remedial Works Quality Plan

Contractor Proposal EPDM Remedial Works Quality Plan

Contractor Proposal for Curtain Wall EPDM Remedial Works

Remedial Works Windows Type 2 and 3 Quality Plan