Template

Atlas Copco Well Drill 3060 Pre-Start Checklist

This pre-start checklist helps operators inspect the Atlas Copco Well Drill 3060 before use. It guides teams to confirm emergency stop functions, check hydraulic lines and cooling systems, grease and assess the feed chain, verify rotation head and winch line operation, and review engine oil levels, crawler tracks, rod basket or carousel, and electrical systems. Designed for construction and drilling crews, the checklist supports safer startups, preventive maintenance, and equipment readiness on site.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Drill Inspection Checklist

This drill inspection checklist is designed for surface diamond drilling operations to standardize pre-shift and periodic checks. It guides crews through site access and signage, emergency response readiness, environmental controls and spill prevention, electrical and fire protection, and detailed assessments of rotating equipment, hydraulics, controls, platforms, and stairways. It also covers pump shack safety and support vehicles, including first aid, extinguishers, lighting, and winch gear, helping teams identify hazards and maintain compliance.

by Joel Campbell, from the Community

10+

Get

Template

ATLAS Weekly Safety Observation Audit Checklist

This ATLAS weekly safety observation and audit checklist helps teams assess safe work practices across machine, weld, grind, and engine shops, warehouses, and offices. It covers employee actions, housekeeping, PPE, machine guarding, material storage, chemicals and waste, fire protection, powered industrial trucks, electrical safety, walking and working surfaces, overhead cranes and rigging, and power and hand tools. Use it to document issues, assign corrective actions, and verify supervisor sign off to maintain a safer facility.

by Erick Lawson, from the Community

10+

Get

Template

Directional Drill Equipment Inspection Form

This directional drill equipment inspection form helps competent inspectors assess mobile plant condition and safety before use. It covers PPE, tags and lockouts, emergency stops, guards and rotation cages, communications, fire extinguisher, first aid and spill kits, lifting gear, housekeeping, reversing alarm, signage, working and flashing lights. Maintenance checks include fluid levels, grease and lubrication, hydraulic hoses for leaks, tyres or tracks, mast and drill head, pins, bushes and cylinders, control panel cables, gauges and levers, structural cracks or welds, undercarriage jacks and pads, batteries and electrical connections. Sections for drilling tools, general tools, and comments or defects support clear documentation and follow-up actions.

by Erika Pitout, from the Community

20+

Get

Template

Madstylz Daily Plant Pre Start Checklist

This daily plant pre start checklist is designed for horizontal directional drilling operations. It guides operators to record project details and hour readings, then perform machine checks including track tension and condition, underside leaks and debris, and all fluid levels for drill lubricant, engine coolant and oil, fuel, and hydraulics. It covers electric strike system setup and testing before each drill shot. Weekly items include controls, gauges, safety labels, handholds and steps, seat and seat belt, fire extinguisher, isolation tags, and the operational manual. The checklist supports adding photos, notes, and corrective actions, and concludes with comments and a digital signature for completion.

by Andrew Richbell, from the Community

10+

Get

Template

Daily PM Checklist for Drill Rig Maintenance

Perform this daily preventive maintenance checklist for drill rigs prior to operation. Verify engine oil, radiator and hydraulic levels; inspect hoses and couplings for leaks and wear; test all safety and kill switches; secure loads, guards and cover plates; grease the kelly bar; check battery security, terminals and corrosion; assess fan belt tension and wear; look for hydraulic, gear, engine, coolant and fuel leaks; tighten loose bolts; confirm gauges for temperature, voltage and oil pressure; check hoisting cable safety latches; inspect the exhaust; and confirm all guards are reinstalled after maintenance. Record approvals and the technician performing maintenance.

by Kathleen Flaherty, from the Community

10+

Get

Template

CCM Drill Rig Management Checklist

Standardize drill rig operations with this CCM Drill Rig Management checklist. Verify compliance with Fortescue and site standards, complete pre-mobilisation inspections, and document controls before operation. Cover drill pad setup, exclusion zones, isolation and E-stop locations, and safe rod handling. Track operator training and competency, conduct routine pre-start checks, and align maintenance schedules with OEM requirements to keep rigs safe and compliant.

by Brett Leppinus, from the Community

Get