Template

Fire Barriers to Windows QA - Harrow Depot

by William Carter, from the Community

Use this quality assurance checklist to inspect and sign off window fire barriers at Harrow Depot. Record project details such as main contractor, project number, QA sheet number, elevation, and level. Verify that 0.7 mm Prisma plates are continuous across cill and jamb on twin skin SFS and are secured at 600 mm centres with stainless steel rivets. Check that 100 mm RWA45 rockwool is installed without gaps between head track and lintel on all windows. Add photos, notes, and corrective actions, assign responsibilities and due dates, and capture installer, A2O, and client signatures before completion.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

A2O Fire Barriers to Slab Harrow Depot

This construction QA template covers inspection of fire barriers to slab at Harrow Depot. It guides installers through verifying Siderise LGS barriers at each slab level, correct compression and jointing, Prisma plate fixings to SFS at 600 mm centers with stainless steel rivets, and Rockwool RWA45 installation without gaps. It includes instructions for adding photos, notes, and corrective actions, fields for contractor and project details, and signatures for installer, A2O, and client. Use it to standardize compliance, documentation, and quality control on site.

by William Carter, from the Community

Get

Template

Fiche d'inspection des véhicules

by William Carter, from the Community

Get

Template

A2O Brick Tie Channels Harrow Depot QA Checklist

This construction quality assurance checklist focuses on the installation of Tyvek housewrap, K15 insulation, and Ancon brick tie channels for SFS wall assemblies at Harrow Depot. It guides installers through checks on overlaps, taping, fixings, spacing and stud centers, and records personnel. The template supports adding photos, notes and corrective actions, and captures installer, contractor and client signatures for completion and reporting.

by William Carter, from the Community

Get

Template

A2O Versapanel Board Quality Assurance

Use this checklist to verify compliant installation of A2O Versapanel boards. Confirm 10 mm board as per drawings, check fixing centers at 600 mm horizontal, 300 mm vertical on board edges and 600 mm vertical in the center, with fixings at least 40 mm down and 15 mm in from edges. Leave a 3 to 6 mm gap and seal joints with versasealer. Provide 25 mm movement joints at slab level. Add photos, notes, and corrective actions, capture installer, contractor, and client signatures, and export the report.

by William Carter, from the Community

Get

Template

A2O Versaroc Quality Assurance Checklist

This A2O Versaroc Quality Assurance checklist helps installers and site supervisors verify Versaroc wall board installation against project drawings and specifications. Confirm 12 mm boards, correct fixings to SFS at 600 mm horizontal and 300 mm vertical centres, 3-6 mm board joints, and proper sealing with Versaseal and Versatape. Capture photos, add actions, assign responsibility, and complete sign-off with installer, A2O, and client signatures.

by Roman Fedenko, from the Community

Get

Template

Fire Barriers Quality Assurance Checklist

Use this fire barriers quality assurance checklist to document installation checks on cavity barriers. Verify clip penetration minimum 50 percent, clip spacing at maximum 500 mm centres, mid depth placement, polythene integrity, intumescent edge orientation to face outward, and sealing of gaps with intumescent sealant. Confirm airspace does not exceed 44 mm. Record personnel including installer and A2O, add photos and notes, raise corrective actions with owners, priorities and due dates, capture digital signatures for installer, A2O and client, and export the report.

by William Carter, from the Community

Get

Fire Barriers to Windows QA - Harrow Depot

About author

You might also like

A2O Fire Barriers to Slab Harrow Depot

Fiche d'inspection des véhicules

A2O Brick Tie Channels Harrow Depot QA Checklist

A2O Versapanel Board Quality Assurance

A2O Versaroc Quality Assurance Checklist

Fire Barriers Quality Assurance Checklist

You might also like

A2O Fire Barriers to Slab Harrow Depot

Fiche d'inspection des véhicules

A2O Brick Tie Channels Harrow Depot QA Checklist

A2O Versapanel Board Quality Assurance

A2O Versaroc Quality Assurance Checklist

Fire Barriers Quality Assurance Checklist