Template

Work Action Safety Plan for HIAB Drivers

by Ricky Dawson, from the Community

Use this work action safety plan tailored for HIAB and lorry loader drivers to validate site readiness before lifts. Check safe access and egress, nearby high-risk areas such as schools or cycle lanes, overhead power lines, third-party exclusion zones, and work platform access. Confirm fall prevention, rigging status, ground conditions, and weather are suitable. Record who prepared the plan, location, and date to ensure compliant, consistent lifting operations.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
Rigid Vehicle with Hiab Daily Checklist
This pre-use inspection checklist is designed for drivers of rigid vehicles equipped with Hiab cranes. It covers core roadworthiness checks including lights, brakes, tyres, mirrors, seatbelts, fluids, and documentation, plus detailed Hiab checks for hydraulics, PTO, stabilisers, booms and extensions, lifting hooks and slings, overload warning and anemometer. Record mileage, cleanliness, accident damage and strap condition, capture defects with comments, and follow clear actions if the vehicle is unsafe to drive.
by steve askham, from the Community
Downloads: 20+
Get
Template
Tasman Power Lifting Operations CCC
Use this checklist to plan and control lifting operations in mining environments. Aligned with Rio Tinto Critical Control Checklist standards, it guides teams through mechanical integrity checks for cranes and lifting gear, verification of load capacity, assessment of weather and ground conditions, and identification of overhead hazards. It reinforces agreed communications, proper rigging to the lift plan, and effective barriers and exclusion zones, including tag line use. Capture site details, responsibilities, and sign off to document safe, compliant lifts.
by J White, from the Community
Downloads: 0
Get
Template
Emergency action plan audit
Emergency action plan audit
by SafetyCulture
Downloads: 200+
Get
Template
Pre-Lift Risk Assessment Checklist
Use this pre-lift risk assessment checklist to plan and verify safe lifting operations on site. Assess weather and wind speeds, ground conditions for lorry stabilisers, and proximity to overhead hazards including power lines. Confirm crane capacity against radius and load, ensure clear segregation of the lifting zone, and maintain line of sight. Check lifting points and roofs, validate personnel requirements for stacking and de-stacking, and follow Network Rail rules where applicable. Capture compliance photos and document decisions before sign-off by the driver.
by Nick Sesevic, from the Community
Downloads: 0
Get

Rigid Vehicle with Hiab Daily Checklist

This pre-use inspection checklist is designed for drivers of rigid vehicles equipped with Hiab cranes. It covers core roadworthiness checks including lights, brakes, tyres, mirrors, seatbelts, fluids, and documentation, plus detailed Hiab checks for hydraulics, PTO, stabilisers, booms and extensions, lifting hooks and slings, overload warning and anemometer. Record mileage, cleanliness, accident damage and strap condition, capture defects with comments, and follow clear actions if the vehicle is unsafe to drive.

by steve askham, from the Community

20+

Get

Template

Tasman Power Lifting Operations CCC

Use this checklist to plan and control lifting operations in mining environments. Aligned with Rio Tinto Critical Control Checklist standards, it guides teams through mechanical integrity checks for cranes and lifting gear, verification of load capacity, assessment of weather and ground conditions, and identification of overhead hazards. It reinforces agreed communications, proper rigging to the lift plan, and effective barriers and exclusion zones, including tag line use. Capture site details, responsibilities, and sign off to document safe, compliant lifts.

by J White, from the Community

Get

Template

Emergency action plan audit

by SafetyCulture

200+

Get

Template

Pre-Lift Risk Assessment Checklist

Use this pre-lift risk assessment checklist to plan and verify safe lifting operations on site. Assess weather and wind speeds, ground conditions for lorry stabilisers, and proximity to overhead hazards including power lines. Confirm crane capacity against radius and load, ensure clear segregation of the lifting zone, and maintain line of sight. Check lifting points and roofs, validate personnel requirements for stacking and de-stacking, and follow Network Rail rules where applicable. Capture compliance photos and document decisions before sign-off by the driver.

by Nick Sesevic, from the Community

Get

Work Action Safety Plan for HIAB Drivers

About author

You might also like

Rigid Vehicle with Hiab Daily Checklist

Tasman Power Lifting Operations CCC

Emergency action plan audit

Pre-Lift Risk Assessment Checklist

You might also like

Rigid Vehicle with Hiab Daily Checklist

Tasman Power Lifting Operations CCC

Emergency action plan audit

Pre-Lift Risk Assessment Checklist