Template

Cutting and Welding Cart Inspection Checklist

by Bob Jordan, from the Community

30+

Use this daily Vehicle Condition Report to inspect cutting and welding carts in transport and logistics operations. Verify correct PPE, cart frame, wheels, chains, gauges, oxygen and fuel tanks, torch handle and attachments, tips, hoses, and regulators. Confirm the hot work area is clean and permitted and a fire extinguisher is available. Record defects and corrective actions to maintain safety, compliance, and equipment readiness.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Gas Welding and Cutting Inspection Checklist
This gas welding and cutting inspection template helps teams assess key safety controls for oxyfuel welding and cutting. Verify cylinders are secured and stored correctly, check for damage to cylinder valves and guards, inspect regulators and adjusting screws, confirm flashback arrestors are fitted at the regulator and torch, and test torch valves, hoses, and nozzle condition. The checklist also covers combustible materials, housekeeping in the welding bay, and removal of personal items. Use it to standardize inspections, reduce hazards, and support compliance with site safety procedures.
by Ria Dercksen, from the Community
Downloads: 10+
Get
Template
Hot Work Inspection: Welding, Cutting, Grinding
This workplace inspection checklist helps teams manage hot work risks for welding, cutting, and grinding. It covers permit to work, fire prevention and firewatch, PPE and double eye protection, barricades and signage, housekeeping, ventilation and dust controls, gas cylinders and hoses, welding machines and grinders, and pre-use inspections. Use it to document findings, assign actions, and maintain compliance across construction and maintenance sites.
by Henno Ferreira, from the Community
Downloads: 30+
Get
Template
Hot Work and Welding Safety Checklist
Use this hot work and welding safety checklist to plan and control high risk tasks. It guides crews through fire watch duties, clearing combustibles by 35 feet, installing welding blinds or shields, and verifying PPE including shade appropriate helmets, safety glasses, flame resistant clothing, gloves, and face shields for cutting and grinding. Inspect hoses, regulators, tips, gauges, cords, electrode holders, and grounding. Confirm the correct fire extinguisher is within 35 feet, complete and post the hot work permit, check ventilation and lighting, and maintain clean, debris free work areas.
by Adam Kelly, from the Community
Downloads: 20+
Get
Template
Oxygen and Fuel Gas Inspection Checklist
This oxygen and fuel gas inspection checklist helps teams verify the safety of oxy-fuel equipment used for cutting and welding. Inspect oxygen and fuel regulators for suitability, damage, pressure creep, leak test results, gauge visibility, and age over five years. Check hose colors, fittings, bends, and leaks. Review torches and attachments for damage, leaks, age, and O-rings. Confirm flashback arrestors at torch and regulator ends and ensure fire protection is fitted to the trolley. Capture names and signatures for accountability.
by Ben Mills, from the Community
Downloads: 20+
Get

Gas Welding and Cutting Inspection Checklist

This gas welding and cutting inspection template helps teams assess key safety controls for oxyfuel welding and cutting. Verify cylinders are secured and stored correctly, check for damage to cylinder valves and guards, inspect regulators and adjusting screws, confirm flashback arrestors are fitted at the regulator and torch, and test torch valves, hoses, and nozzle condition. The checklist also covers combustible materials, housekeeping in the welding bay, and removal of personal items. Use it to standardize inspections, reduce hazards, and support compliance with site safety procedures.

by Ria Dercksen, from the Community

10+

Get

Template

Hot Work Inspection: Welding, Cutting, Grinding

This workplace inspection checklist helps teams manage hot work risks for welding, cutting, and grinding. It covers permit to work, fire prevention and firewatch, PPE and double eye protection, barricades and signage, housekeeping, ventilation and dust controls, gas cylinders and hoses, welding machines and grinders, and pre-use inspections. Use it to document findings, assign actions, and maintain compliance across construction and maintenance sites.

by Henno Ferreira, from the Community

30+

Get

Template

Hot Work and Welding Safety Checklist

Use this hot work and welding safety checklist to plan and control high risk tasks. It guides crews through fire watch duties, clearing combustibles by 35 feet, installing welding blinds or shields, and verifying PPE including shade appropriate helmets, safety glasses, flame resistant clothing, gloves, and face shields for cutting and grinding. Inspect hoses, regulators, tips, gauges, cords, electrode holders, and grounding. Confirm the correct fire extinguisher is within 35 feet, complete and post the hot work permit, check ventilation and lighting, and maintain clean, debris free work areas.

by Adam Kelly, from the Community

20+

Get

Template

Oxygen and Fuel Gas Inspection Checklist

This oxygen and fuel gas inspection checklist helps teams verify the safety of oxy-fuel equipment used for cutting and welding. Inspect oxygen and fuel regulators for suitability, damage, pressure creep, leak test results, gauge visibility, and age over five years. Check hose colors, fittings, bends, and leaks. Review torches and attachments for damage, leaks, age, and O-rings. Confirm flashback arrestors at torch and regulator ends and ensure fire protection is fitted to the trolley. Capture names and signatures for accountability.

by Ben Mills, from the Community

20+

Get

Cutting and Welding Cart Inspection Checklist

About author

You might also like

Gas Welding and Cutting Inspection Checklist

Hot Work Inspection: Welding, Cutting, Grinding

Hot Work and Welding Safety Checklist

Oxygen and Fuel Gas Inspection Checklist

You might also like

Gas Welding and Cutting Inspection Checklist

Hot Work Inspection: Welding, Cutting, Grinding

Hot Work and Welding Safety Checklist

Oxygen and Fuel Gas Inspection Checklist