Template

EDG Opening and Refit Inspection Tool

by David Axon, from the Community

This comprehensive checklist supports pre-opening and post-refit inspections for retail stores to confirm safety readiness and compliance. It covers external areas and docks, store entry, trading floor, offices, stock rooms, and amenities, plus culture and behavior checks, training and administration, and customer trolleys. Items include hazard control, lighting, CCTV, emergency equipment and plans, PPE, manual handling, traffic management, MHE checks, and action planning for continuous improvement.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
SHE Inspection for Commercial Vessels in Refit
This SHE inspection checklist supports safe refit operations on commercial vessels. It guides audits across housekeeping between decks and on weatherdecks, fire safety systems, access and egress, scaffolding condition and tagging, PPE compliance, portable electrical equipment, fuel and gas bottle storage, and maritime pollution controls (MARPOL). It also prompts review of induction and permits, RAMS for fueling, spill kit readiness, and COSHH compliance. Use it to standardize refit safety checks and record observations and corrective actions.
by Chris Clarke, from the Community
Downloads: 10+
Get
Template
New Store and Refit Completion Day Handover
Use this checklist to complete new store openings and refit handovers for Wickes operations. It covers exterior readiness, car park and signage, colleague areas, health and safety compliance (risk assessments, training, storage at height), merchandising to plan, POS and promotional implementation, warehouse and yard setup, click and collect and racking, high-value room security, shopfloor availability and tagging, IT and telecoms checks (phones, headsets, HHTs), and kitchen and bathroom showroom readiness. Includes snagging notes and final sign-off.
by Craig Bowler, from the Community
Downloads: 40+
Get
Template
CM Health and Safety Audit and Site Setup
Conduct a comprehensive construction site health and safety audit and set up with this checklist. Verify site files and approvals, RAMS and permits, safety signage and boards, PPE compliance, traffic and pedestrian segregation, plant inspections, ladders and podium use, floor opening controls, equipment and tool checks, waste management and housekeeping, lighting and noise, and emergency setup including fire, first aid, and spill kits. Capture observations and photos to improve site readiness and compliance.
by Shaun Aherne, from the Community
Downloads: 10+
Get
Template
Monthly Health and Safety Audit Checklist
Conduct a comprehensive monthly health and safety audit across offices, workshops, and site areas. This checklist covers pre-audit checks, lighting, emergency lighting, fire exits and alarms, first aid and HSE postings, PPE suitability and training, manual handling practices and aids, staff training and supervision, general workshop safety, compressed air and gas cylinder handling, chemicals management with COSHH and SDS, fire and emergency evacuation readiness, racking and storage, ladders and access equipment, tool condition and use, machinery guarding and isolation, and lifting equipment inspections. Use it to identify hazards, verify compliance, and assign corrective actions with documented confirmation.
by Claudia Garcia, from the Community
Downloads: 0
Get

SHE Inspection for Commercial Vessels in Refit

This SHE inspection checklist supports safe refit operations on commercial vessels. It guides audits across housekeeping between decks and on weatherdecks, fire safety systems, access and egress, scaffolding condition and tagging, PPE compliance, portable electrical equipment, fuel and gas bottle storage, and maritime pollution controls (MARPOL). It also prompts review of induction and permits, RAMS for fueling, spill kit readiness, and COSHH compliance. Use it to standardize refit safety checks and record observations and corrective actions.

by Chris Clarke, from the Community

10+

Get

Template

New Store and Refit Completion Day Handover

Use this checklist to complete new store openings and refit handovers for Wickes operations. It covers exterior readiness, car park and signage, colleague areas, health and safety compliance (risk assessments, training, storage at height), merchandising to plan, POS and promotional implementation, warehouse and yard setup, click and collect and racking, high-value room security, shopfloor availability and tagging, IT and telecoms checks (phones, headsets, HHTs), and kitchen and bathroom showroom readiness. Includes snagging notes and final sign-off.

by Craig Bowler, from the Community

40+

Get

Template

CM Health and Safety Audit and Site Setup

Conduct a comprehensive construction site health and safety audit and set up with this checklist. Verify site files and approvals, RAMS and permits, safety signage and boards, PPE compliance, traffic and pedestrian segregation, plant inspections, ladders and podium use, floor opening controls, equipment and tool checks, waste management and housekeeping, lighting and noise, and emergency setup including fire, first aid, and spill kits. Capture observations and photos to improve site readiness and compliance.

by Shaun Aherne, from the Community

10+

Get

Template

Monthly Health and Safety Audit Checklist

Conduct a comprehensive monthly health and safety audit across offices, workshops, and site areas. This checklist covers pre-audit checks, lighting, emergency lighting, fire exits and alarms, first aid and HSE postings, PPE suitability and training, manual handling practices and aids, staff training and supervision, general workshop safety, compressed air and gas cylinder handling, chemicals management with COSHH and SDS, fire and emergency evacuation readiness, racking and storage, ladders and access equipment, tool condition and use, machinery guarding and isolation, and lifting equipment inspections. Use it to identify hazards, verify compliance, and assign corrective actions with documented confirmation.

by Claudia Garcia, from the Community

Get

EDG Opening and Refit Inspection Tool

About author

You might also like

SHE Inspection for Commercial Vessels in Refit

New Store and Refit Completion Day Handover

CM Health and Safety Audit and Site Setup

Monthly Health and Safety Audit Checklist

You might also like

SHE Inspection for Commercial Vessels in Refit

New Store and Refit Completion Day Handover

CM Health and Safety Audit and Site Setup

Monthly Health and Safety Audit Checklist