Template

Underground Pump Station Motor CBM 4-Week Inspection

by Nyamjav Terbish, from the Community

This step by step SWI guides monthly condition based maintenance for underground pump station motors. It covers pre start preparations and isolation, electrical and site safety controls, and detailed IR temperature, ultrasound and vibration inspections. Record motor and gearbox values, compare against manufacturer or standards acceptance criteria, and report defects. Estimated duration is about 1 hour at Kennecott Underground. Intended for PdM trained and authorized personnel within Asset Management.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Underground Pump CBM Checklist
This step by step condition based maintenance checklist guides monthly online inspections of underground pump stations. It covers infrared temperature checks, ultrasound inspections and vibration monitoring to identify overheating, cavitation, bearing wear and other defects. Includes pre start hazard controls, required PPE, isolation process, data recording and close out steps to return equipment to service and report issues. Suitable for asset management and predictive maintenance teams at Kennecott Underground or similar mining operations.
by Nyamjav Terbish, from the Community
Downloads: 0
Get
Template
Underground Pump Station Agitator Inspection (4-Week)
Use this SWI-based template to perform a scheduled 4-week visual inspection of underground pump station agitators. It covers pre-start preparation and C1 isolation, required PPE, hazard controls, and step-by-step checks for damage, fasteners, and debris. Record findings, report defects to supervisors and planning, and document any repairs. Includes housekeeping, tool care, and completion steps to return equipment to service safely at Kennecott Underground.
by Nyamjav Terbish, from the Community
Downloads: 0
Get
Template
Underground Pump Station Mechanical Inspection
Use this standard work instruction to perform a planned 4 week visual inspection of underground pump station pumps at Kennecott Underground. The procedure covers pre start preparation and isolation, required PPE and tools, and safety considerations including electrical hazards, slips and trips, visibility, force and communication. Detailed steps guide checks for leaks, loose fasteners, housing damage, and adjustment bolts. After the inspection, clean the work area, return tools and parts, notify the supervisor that the pump station is back in operation, and report any defects or repairs. This procedure is intended for trained, competent mechanics working in asset management at underground mining sites.
by Nyamjav Terbish, from the Community
Downloads: 0
Get
Template
Underground Pump Motor Inspection Checklist
This SWI guides mechanics through a 4-week online visual inspection of underground pump station motors. It covers pre-start preparations and isolation, critical safety controls, and PPE. Steps include motor checks for leaks, wiring, vibration and damage, RTD connection and cable inspection, coupling fasteners and corrosion review, and RTD cleaning and fault log review. The checklist concludes with housekeeping, parts returns, documentation, and notification that the motor is back in operation.
by Nyamjav Terbish, from the Community
Downloads: 0
Get

Underground Pump CBM Checklist

This step by step condition based maintenance checklist guides monthly online inspections of underground pump stations. It covers infrared temperature checks, ultrasound inspections and vibration monitoring to identify overheating, cavitation, bearing wear and other defects. Includes pre start hazard controls, required PPE, isolation process, data recording and close out steps to return equipment to service and report issues. Suitable for asset management and predictive maintenance teams at Kennecott Underground or similar mining operations.

by Nyamjav Terbish, from the Community

Get

Template

Underground Pump Station Agitator Inspection (4-Week)

Use this SWI-based template to perform a scheduled 4-week visual inspection of underground pump station agitators. It covers pre-start preparation and C1 isolation, required PPE, hazard controls, and step-by-step checks for damage, fasteners, and debris. Record findings, report defects to supervisors and planning, and document any repairs. Includes housekeeping, tool care, and completion steps to return equipment to service safely at Kennecott Underground.

by Nyamjav Terbish, from the Community

Get

Template

Underground Pump Station Mechanical Inspection

Use this standard work instruction to perform a planned 4 week visual inspection of underground pump station pumps at Kennecott Underground. The procedure covers pre start preparation and isolation, required PPE and tools, and safety considerations including electrical hazards, slips and trips, visibility, force and communication. Detailed steps guide checks for leaks, loose fasteners, housing damage, and adjustment bolts. After the inspection, clean the work area, return tools and parts, notify the supervisor that the pump station is back in operation, and report any defects or repairs. This procedure is intended for trained, competent mechanics working in asset management at underground mining sites.

by Nyamjav Terbish, from the Community

Get

Template

Underground Pump Motor Inspection Checklist

This SWI guides mechanics through a 4-week online visual inspection of underground pump station motors. It covers pre-start preparations and isolation, critical safety controls, and PPE. Steps include motor checks for leaks, wiring, vibration and damage, RTD connection and cable inspection, coupling fasteners and corrosion review, and RTD cleaning and fault log review. The checklist concludes with housekeeping, parts returns, documentation, and notification that the motor is back in operation.

by Nyamjav Terbish, from the Community

Get

Underground Pump Station Motor CBM 4-Week Inspection

About author

You might also like

Underground Pump CBM Checklist

Underground Pump Station Agitator Inspection (4-Week)

Underground Pump Station Mechanical Inspection

Underground Pump Motor Inspection Checklist

You might also like

Underground Pump CBM Checklist

Underground Pump Station Agitator Inspection (4-Week)

Underground Pump Station Mechanical Inspection

Underground Pump Motor Inspection Checklist