Template

SAWS Inside Inspection Checklist for Pumps and Wells

by Edgar Valle-Torres, from the Community

10+

Standardize SAWS inside inspections across pump rooms, MCC rooms, wells, reservoirs, tailings and process water assets. Capture start times, equipment status, room cleanliness, lighting, heater status and leak checks. Record key operating data including discharge flow and pressure, total flow, depth to water, sump levels, tank levels, chlorine bottle weight and pH. Verify pumps running and log discharge pressures per pump. Cover specific locations such as Bingham booster, Copperton chlorinator, culinary wells, tail water reservoir, truck shop and waste water pump station. Finish with a sign off to confirm the entire inspection.

With SafetyCulture you can

Digitize team workflows

Turn your workflows into digital templates or checklists so your team can conduct inspections efficiently and access them from any device.

Reduce manual errors

Help your team complete tasks more accurately with digital templates that minimize errors from manual processes.

Create and share inspection reports

Generate inspection reports and share them with your team and stakeholders to keep everyone informed.

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
SAWS All Pump Stations Checklist
Use this SAWS All Pump Stations checklist to standardize inspections across mining sites including wells, boosters, reservoirs, chlorinators, and wastewater stations. Record discharge flow, total flow, pressures, sump levels, differential pressure, depth to water, pH, and equipment status. Verify lights, cleanliness, leaks, heaters, and ventilation in pump and MCC rooms to maintain safety, reliability, and environmental compliance.
by Edgar Valle-Torres, from the Community
Downloads: 10+
Get
Template
SAWS Inspections Outside Checklist
This SAWS Inspections Outside checklist standardizes field rounds for pump stations, wells, tunnels, chlorinators, canals, and tailings pipelines on mining sites. It guides operators to verify lighting and cleanliness in pump and MCC rooms, check for leaks and debris, and capture operational data including discharge flows, totalized flow, sump levels, discharge and differential pressures, and depth to water. Sections cover assets such as Acid Wells 2 and 3, Bingham Booster and Mascotte Tunnel, Clean Water Well, K-60 and K-109 wells, Lark Chlorinator UV systems, Lower Canal, Mid-Valley, Notch Box and Pump House, Picnic Flats, and Sulfate stations. The template supports consistent reporting, safety assurance, and equipment performance tracking across outside routes.
by Edgar Valle-Torres, from the Community
Downloads: 10+
Get
Template
Gipps Street Weekly Inspection Checklist
This weekly inspection checklist for the Gipps Street site helps field teams verify key environmental and utility assets. Inspect storage tanks for access and water levels; open wells and review pumps, pump boxes, and alarms; note leachate status, geofabric condition, and trench water levels. Record treatment cell status, including power box security and pest control, and capture flow meter readings. Assess the treatment pond for TDS, water level, algae or plant growth, and ensure submersible pumps, mono pump inlet, and floats are clear. Check sewer flow meters and confirm the wetland has safe access, appropriate water level, and a secured outlet. Conclude with general site observations on access, leaks, fencing integrity, and WHS concerns. Ideal for local government and utility operators managing wastewater and leachate treatment systems.
by Kristin Blain, from the Community
Downloads: 10+
Get
Template
Pump Room Inspection Checklist
This pump room inspection checklist supports routine maintenance across entry, foreline, and exit pump areas. Record pump on or off status, pressures, temperatures, and oil levels, and verify oil cooler hoses and related components. Use it to standardize checks on blowers and mechanical pumps, detect issues early, and maintain safe, reliable operation in industrial environments.
by Jay De Los Rios, from the Community
Downloads: 20+
Get

SAWS Inside Inspection Checklist for Pumps and Wells

With SafetyCulture you can

Digitize team workflows

Reduce manual errors

Create and share inspection reports

About author

You might also like

SAWS All Pump Stations Checklist

SAWS Inspections Outside Checklist

Gipps Street Weekly Inspection Checklist

Pump Room Inspection Checklist

You might also like

SAWS All Pump Stations Checklist

SAWS Inspections Outside Checklist

Gipps Street Weekly Inspection Checklist

Pump Room Inspection Checklist