Template

Dragline Supervisor Plan Compliance v2.0

by Alicia Ragan, from the Community

10+

This dragline supervisor plan compliance checklist supports shift inspections at Caval Ridge Mine across DRE17, DRE18, DRE34, and DRE35. It guides supervisors to confirm design compliance for bench width and RL, highwall and lowwall positions, catch berms, ramp width and grade, pit lines, and coal edges. It also covers sump readiness, cable inspection, exclusion berms, parking and access signage, dozer requirements, drainage, bench prep, machine whiteboard updates, photos, comments, and sign-off.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
SRM DRE Supervisor Plan Compliance Checklist
This checklist supports supervisors in verifying shift-by-shift compliance for dragline operations. It covers bench width and levels against design, highwall and lowwall crest and toe positions, key and catch berm dimensions, pit and block alignment, ramp width and grade, coal edge correctness, sump readiness, and hard blast photo records. Operational items include dozer requirements, elevated bench push-off, coal clean-up, key push-down with dozer on wall, bunding to standard, drainage installation, and bench preparation. It also prompts completion of the machine white board and general comments to document findings and actions.
by Vaughn Abrams, from the Community
Downloads: 30+
Get
Template
GRM Dragline Supervisor Inspection Checklist
Use this GRM Dragline Supervisor Inspection Checklist to guide supervisors through pre shift and in shift inspections of dragline operations at mining sites. The form covers signage and traffic controls, access and service road condition, parking compliance, bunding requirements, and correct cable marking and layout along haul roads and around plugs and boats. It prompts checks of bench, highwall and lowwall stability, drainage readiness for rain, and general housekeeping. Capture comments and identified hazards, record site, machine and shift details, and sign off to document corrective actions and compliance.
by Sally McLellan, from the Community
Downloads: 20+
Get
Template
2024 Drill and Blast Bench Preparation Checklist
This 2024 drill and blast bench preparation template supports safe, compliant mining operations. It guides teams through SRF scheduling, weekly plan changes, and key drawings, then verifies bench access, bunding, ramps and intersections, drainage, and geotechnical controls. It covers bench surface prep, removal or relocation of pumps, pipelines, cables, technology, and infrastructure, plus design limits and permits to disturb. Additional sections address dust management, spon com risk and gas monitoring, crib hut and float logistics, cable plans, water near shots, and other hazards. Final sections document non-compliance controls, equipment within exclusion zones, required notifications, periodic signoffs, and final handover approvals.
by Skye Davis, from the Community
Downloads: 0
Get
Template
CVM Thiess Supervisor Inspection Checklist
This CVM Thiess Supervisor Inspections checklist supports open cut mining supervisors in planning and verifying safe, compliant operations across the pit. Review pre-start communications, OCE hazards, JSAs, and shift safety concerns. Inspect excavators and dozer activities, bunding, bench height and angle, geotechnical hazards, and compliance to design. Assess dumps for signage, access control, drainage, dump height, face alignment, and dozer guidance. Check haul roads and ramps for surface condition, delineation, signage, grades, cambers, and traffic controls. Verify water truck practices, in-pit refuel bays, crib huts and park-up areas, lighting, and housekeeping. Capture photos, notes, and sign off for traceable actions and handover.
by Rachel Menkens, from the Community
Downloads: 0
Get

SRM DRE Supervisor Plan Compliance Checklist

This checklist supports supervisors in verifying shift-by-shift compliance for dragline operations. It covers bench width and levels against design, highwall and lowwall crest and toe positions, key and catch berm dimensions, pit and block alignment, ramp width and grade, coal edge correctness, sump readiness, and hard blast photo records. Operational items include dozer requirements, elevated bench push-off, coal clean-up, key push-down with dozer on wall, bunding to standard, drainage installation, and bench preparation. It also prompts completion of the machine white board and general comments to document findings and actions.

by Vaughn Abrams, from the Community

30+

Get

Template

GRM Dragline Supervisor Inspection Checklist

Use this GRM Dragline Supervisor Inspection Checklist to guide supervisors through pre shift and in shift inspections of dragline operations at mining sites. The form covers signage and traffic controls, access and service road condition, parking compliance, bunding requirements, and correct cable marking and layout along haul roads and around plugs and boats. It prompts checks of bench, highwall and lowwall stability, drainage readiness for rain, and general housekeeping. Capture comments and identified hazards, record site, machine and shift details, and sign off to document corrective actions and compliance.

by Sally McLellan, from the Community

20+

Get

Template

2024 Drill and Blast Bench Preparation Checklist

This 2024 drill and blast bench preparation template supports safe, compliant mining operations. It guides teams through SRF scheduling, weekly plan changes, and key drawings, then verifies bench access, bunding, ramps and intersections, drainage, and geotechnical controls. It covers bench surface prep, removal or relocation of pumps, pipelines, cables, technology, and infrastructure, plus design limits and permits to disturb. Additional sections address dust management, spon com risk and gas monitoring, crib hut and float logistics, cable plans, water near shots, and other hazards. Final sections document non-compliance controls, equipment within exclusion zones, required notifications, periodic signoffs, and final handover approvals.

by Skye Davis, from the Community

Get

Template

CVM Thiess Supervisor Inspection Checklist

This CVM Thiess Supervisor Inspections checklist supports open cut mining supervisors in planning and verifying safe, compliant operations across the pit. Review pre-start communications, OCE hazards, JSAs, and shift safety concerns. Inspect excavators and dozer activities, bunding, bench height and angle, geotechnical hazards, and compliance to design. Assess dumps for signage, access control, drainage, dump height, face alignment, and dozer guidance. Check haul roads and ramps for surface condition, delineation, signage, grades, cambers, and traffic controls. Verify water truck practices, in-pit refuel bays, crib huts and park-up areas, lighting, and housekeeping. Capture photos, notes, and sign off for traceable actions and handover.

by Rachel Menkens, from the Community

Get

Dragline Supervisor Plan Compliance v2.0

About author

You might also like

SRM DRE Supervisor Plan Compliance Checklist

GRM Dragline Supervisor Inspection Checklist

2024 Drill and Blast Bench Preparation Checklist

CVM Thiess Supervisor Inspection Checklist

You might also like

SRM DRE Supervisor Plan Compliance Checklist

GRM Dragline Supervisor Inspection Checklist

2024 Drill and Blast Bench Preparation Checklist

CVM Thiess Supervisor Inspection Checklist