Template

BLF/ROM/MCC Workplace Inspection Checklist

by Dan Rayner, from the Community

10+

This BLF/ROM/MCC workplace inspection checklist supports mining site audits across barge loadout facilities, ROM areas, stackers, MCCs, and generators. It covers access and egress, emergency equipment and lighting, first aid and AEDs, guarding, signage, SWIs, slips and trips, electrical safety and RCDs, manual handling, hazardous chemicals and SDS, spill control, vehicle pre-starts, and environmental controls such as dust, waste, and bunding. Use it to identify hazards, record actions for fixes, and maintain compliance and safe operations.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
CVM North ROM Checklist 1.2
This CVM North ROM checklist supports mining site operations with structured operational checks and housekeeping standards across conveyors, feeders, crushers, and stackers. It covers oil leaks, dust suppression, guarding, belt tracking, vibration/noise, sump pump status, walkways and access, and dust level escalation (TARP). Use it to maintain equipment integrity, consistent feed rates, clean work areas, and compliance with site safety procedures.
by Jeremy Wallace, from the Community
Downloads: 50+
Get
Template
CVC WHS Audit and Inspection Checklist
This WHS audit and inspection checklist helps organizations review critical workplace safety controls and compliance. It covers exterior and interior conditions, access and egress, notice board requirements, emergency planning and drills, amenities and housekeeping, first aid readiness, fire protection testing, electrical safety and RCDs, workshops and tools, lifting equipment, plant and machinery checks, signage, and personal protective equipment. It also includes hazardous chemicals management such as registers, SDS availability, segregation, bunding, spill response, and appropriate PPE. Use it to identify hazards, verify maintenance and testing, and drive corrective actions.
by Justin Menzies, from the Community
Downloads: 10+
Get
Template
ADI ROM HSE Assessment Checklist
This ADI ROM HSE Assessment checklist helps evaluate warehouse and logistics operations for Health, Safety, and Environmental compliance. It covers fire extinguishers and exit routes, warehouse racking and storage clearances, chemical and battery handling, storm water documentation, powered industrial trucks and eyewash stations, truck loading and unloading controls, office and records reviews (SDS access, drills, training), general HSE items including first aid kits and safety postings, and electrical safety such as GFCIs and surge protector use. Use it to document findings and track corrective actions to closure.
by Rusty Camp, from the Community
Downloads: 20+
Get
Template
HSE Workplace Safety Inspection Checklist
This HSE workplace safety inspection checklist helps teams assess safety across production, distribution, workshops, offices, and site grounds. It covers health and safety systems, housekeeping, electrical safety and test-and-tag, machinery operation and guarding, stairs and landings, manual handling and aids, material storage and racking, amenities, first aid and emergency equipment, lighting, fire control and wardens, permit to work, lockout tagout and E-stops, mobile plant pre-starts and licensing, public protection and traffic control, site signage, hazardous substances and SDS management, and restricted areas and confined spaces. Use it to standardize inspections, identify hazards, and implement controls to reduce risk and improve compliance.
by Mark Bilson, from the Community
Downloads: 10+
Get

CVM North ROM Checklist 1.2

This CVM North ROM checklist supports mining site operations with structured operational checks and housekeeping standards across conveyors, feeders, crushers, and stackers. It covers oil leaks, dust suppression, guarding, belt tracking, vibration/noise, sump pump status, walkways and access, and dust level escalation (TARP). Use it to maintain equipment integrity, consistent feed rates, clean work areas, and compliance with site safety procedures.

by Jeremy Wallace, from the Community

50+

Get

Template

CVC WHS Audit and Inspection Checklist

This WHS audit and inspection checklist helps organizations review critical workplace safety controls and compliance. It covers exterior and interior conditions, access and egress, notice board requirements, emergency planning and drills, amenities and housekeeping, first aid readiness, fire protection testing, electrical safety and RCDs, workshops and tools, lifting equipment, plant and machinery checks, signage, and personal protective equipment. It also includes hazardous chemicals management such as registers, SDS availability, segregation, bunding, spill response, and appropriate PPE. Use it to identify hazards, verify maintenance and testing, and drive corrective actions.

by Justin Menzies, from the Community

10+

Get

Template

ADI ROM HSE Assessment Checklist

This ADI ROM HSE Assessment checklist helps evaluate warehouse and logistics operations for Health, Safety, and Environmental compliance. It covers fire extinguishers and exit routes, warehouse racking and storage clearances, chemical and battery handling, storm water documentation, powered industrial trucks and eyewash stations, truck loading and unloading controls, office and records reviews (SDS access, drills, training), general HSE items including first aid kits and safety postings, and electrical safety such as GFCIs and surge protector use. Use it to document findings and track corrective actions to closure.

by Rusty Camp, from the Community

20+

Get

Template

HSE Workplace Safety Inspection Checklist

This HSE workplace safety inspection checklist helps teams assess safety across production, distribution, workshops, offices, and site grounds. It covers health and safety systems, housekeeping, electrical safety and test-and-tag, machinery operation and guarding, stairs and landings, manual handling and aids, material storage and racking, amenities, first aid and emergency equipment, lighting, fire control and wardens, permit to work, lockout tagout and E-stops, mobile plant pre-starts and licensing, public protection and traffic control, site signage, hazardous substances and SDS management, and restricted areas and confined spaces. Use it to standardize inspections, identify hazards, and implement controls to reduce risk and improve compliance.

by Mark Bilson, from the Community

10+

Get

BLF/ROM/MCC Workplace Inspection Checklist

About author

You might also like

CVM North ROM Checklist 1.2

CVC WHS Audit and Inspection Checklist

ADI ROM HSE Assessment Checklist

HSE Workplace Safety Inspection Checklist

You might also like

CVM North ROM Checklist 1.2

CVC WHS Audit and Inspection Checklist

ADI ROM HSE Assessment Checklist

HSE Workplace Safety Inspection Checklist