Template

Site Assessment - Manufacturing

by Camille Massie, from the Community

Assess manufacturing sites for safety and compliance with this comprehensive checklist. Cover training and engagement, incident and near-miss management, housekeeping, fire protection, eyewash stations, PPE, electrical safety, hazardous materials, welding, compressed gas cylinders, lifting devices, forklifts and aerial lifts, machine guarding, paint operations, confined spaces, material handling, racks, and docks. Use the prompts to verify procedures, inspections, and corrective actions.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
Safety Assessment Audit
Use this Safety Assessment Audit to identify workplace hazards and strengthen compliance with OSHA 1910 and 1926 requirements. The checklist reviews employer responsibilities, PPE selection and training, machine guarding, hazard communication, respiratory protection and fit testing, hearing conservation, and control of hazardous energy (lockout/tagout). It also covers emergency action and fire prevention plans, walking-working surfaces and fall protection, first aid and eyewash provisions, compressed air and material handling, forklifts and aerial lifts, cranes and rigging, welding and cutting safety, confined spaces, and housekeeping. Ideal for manufacturing and industrial operations, it helps verify documentation, training, inspections, and safe work practices across facilities and jobsites.
by Ironwood Safety, from the Community
Downloads: 10+
Get
Template
Comprehensive Safety Audit Checklist
This safety audit checklist helps facilities teams assess workplace compliance and risk across key areas. It covers OSHA postings, safety policies, training and inspections, confined spaces, electrical safety, emergency exits and lighting, eyewash and showers, fall protection, fire extinguishers and fire safety, first aid, forklifts and powered industrial trucks, golf carts and low speed vehicles, hand and power tools, hazard communication, ladder safety, machine guarding, material handling and storage, cranes and hoists, personal protective equipment, walking working surfaces and rails, welding and cutting and compressed gas cylinders, and public spaces such as concession areas. Use it to document findings, assign corrective actions, and track abatement for a safer facility.
by Lucio Armendariz, from the Community
Downloads: 0
Get
Template
Welding and Fabrication Safety Checklist
Conduct a comprehensive safety and hazard assessment for welding and fabrication operations. This checklist covers OSHA postings and recordkeeping, PPE requirements, fire protection, machine guarding, lockout/tagout, compressed gas cylinder management, abrasive wheel and power tool safety, welding/cutting/brazing controls, forklifts and industrial trucks, aerial and scissor lifts, spraying operations, confined space entry, ventilation and environmental controls, flammable and combustible materials handling, hazardous chemical exposure, hazard communication, electrical safety, noise, fueling, piping identification, materials handling, and sanitation. Use it to identify risks, document compliance, and strengthen safety programs.
by Felipe Rodriguez, from the Community
Downloads: 0
Get
Template
Facility Safety Inspection Checklist
This Facility Safety Inspection checklist supports manufacturing sites, including wood products facilities, with a comprehensive audit of on-site safety and compliance. It covers fire prevention, signage and visitor requirements, housekeeping, lighting and electrical panels, storage racks, tool and equipment safety, welding areas, overhead cranes, forklifts and aerial lifts, fall protection, radiation controls, chemical and gas storage, hazardous materials handling, visitor administration, environmental and waste management, worker training and knowledge, job safety analysis and pre-shift safety meetings, first aid and AEDs, fuel storage and spill response, confined spaces, general hygiene, outdoor wood yard safety, and office emergency readiness. Use it to verify ERP documentation, inspections, permits, and PPE availability across the facility.
by Shawn Stewart, from the Community
Downloads: 10+
Get

Safety Assessment Audit

Use this Safety Assessment Audit to identify workplace hazards and strengthen compliance with OSHA 1910 and 1926 requirements. The checklist reviews employer responsibilities, PPE selection and training, machine guarding, hazard communication, respiratory protection and fit testing, hearing conservation, and control of hazardous energy (lockout/tagout). It also covers emergency action and fire prevention plans, walking-working surfaces and fall protection, first aid and eyewash provisions, compressed air and material handling, forklifts and aerial lifts, cranes and rigging, welding and cutting safety, confined spaces, and housekeeping. Ideal for manufacturing and industrial operations, it helps verify documentation, training, inspections, and safe work practices across facilities and jobsites.

by Ironwood Safety, from the Community

10+

Get

Template

Comprehensive Safety Audit Checklist

This safety audit checklist helps facilities teams assess workplace compliance and risk across key areas. It covers OSHA postings, safety policies, training and inspections, confined spaces, electrical safety, emergency exits and lighting, eyewash and showers, fall protection, fire extinguishers and fire safety, first aid, forklifts and powered industrial trucks, golf carts and low speed vehicles, hand and power tools, hazard communication, ladder safety, machine guarding, material handling and storage, cranes and hoists, personal protective equipment, walking working surfaces and rails, welding and cutting and compressed gas cylinders, and public spaces such as concession areas. Use it to document findings, assign corrective actions, and track abatement for a safer facility.

by Lucio Armendariz, from the Community

Get

Template

Welding and Fabrication Safety Checklist

Conduct a comprehensive safety and hazard assessment for welding and fabrication operations. This checklist covers OSHA postings and recordkeeping, PPE requirements, fire protection, machine guarding, lockout/tagout, compressed gas cylinder management, abrasive wheel and power tool safety, welding/cutting/brazing controls, forklifts and industrial trucks, aerial and scissor lifts, spraying operations, confined space entry, ventilation and environmental controls, flammable and combustible materials handling, hazardous chemical exposure, hazard communication, electrical safety, noise, fueling, piping identification, materials handling, and sanitation. Use it to identify risks, document compliance, and strengthen safety programs.

by Felipe Rodriguez, from the Community

Get

Template

Facility Safety Inspection Checklist

This Facility Safety Inspection checklist supports manufacturing sites, including wood products facilities, with a comprehensive audit of on-site safety and compliance. It covers fire prevention, signage and visitor requirements, housekeeping, lighting and electrical panels, storage racks, tool and equipment safety, welding areas, overhead cranes, forklifts and aerial lifts, fall protection, radiation controls, chemical and gas storage, hazardous materials handling, visitor administration, environmental and waste management, worker training and knowledge, job safety analysis and pre-shift safety meetings, first aid and AEDs, fuel storage and spill response, confined spaces, general hygiene, outdoor wood yard safety, and office emergency readiness. Use it to verify ERP documentation, inspections, permits, and PPE availability across the facility.

by Shawn Stewart, from the Community

10+

Get

Site Assessment - Manufacturing

About author

You might also like

Safety Assessment Audit

Comprehensive Safety Audit Checklist

Welding and Fabrication Safety Checklist

Facility Safety Inspection Checklist

You might also like

Safety Assessment Audit

Comprehensive Safety Audit Checklist

Welding and Fabrication Safety Checklist

Facility Safety Inspection Checklist