Template

M300 Lathe Weekly Safety Check

by Mac Barry, from the Community

10+

This weekly safety checklist helps operators verify the safe condition of an M300 lathe. Confirm fixed guards are secure, interlocks function correctly, and there is no unintended movement. Test emergency stops and ensure a positive reset is required to restart. Check work and tool holding equipment, inspect electrical and hydraulic components for damage, and note housekeeping hazards such as slips, trips, and falls. Include machine isolation steps and raise maintenance actions as needed to resolve issues found.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
GRINDERBENCH2 Weekly Safety Check
This weekly bench grinder safety checklist helps operators and supervisors verify the GRINDERBENCH2 is safe to use. Confirm fixed guards are secure and in good condition, emergency stops function correctly and require positive restart, and work and tool holding equipment is in a safe condition. Check electrical components and wiring for damage and note visible hazards such as slips, trips and falls. Use this template to standardize inspections, document issues, isolate equipment when needed, and raise maintenance actions to maintain compliance and protect workers.
by Mac Barry, from the Community
Downloads: 0
Get
Template
Andmar 618-TS Grinder Weekly Safety Check
This weekly safety checklist is designed for the Andmar 618-TS grinder to help operators and maintenance teams verify machine safety before use. Inspect fixed guards, confirm interlocks prevent unintended movement, and test emergency stops and restart procedures. Record isolation steps and raise maintenance requests as needed. Review workholding, electrical and hydraulic components for visible damage, and note any housekeeping hazards such as slips, trips, and falls. Use this template to standardize inspections, document findings, and keep grinding operations safe and compliant.
by Mac Barry, from the Community
Downloads: 0
Get
Template
Hurco VM20i Weekly Safety Check Template
This weekly safety checklist is designed for the Hurco VM20i CNC machining center to help teams perform consistent inspections. Verify fixed guards and interlocks, ensure there is no automatic movement without correct guarding, test emergency stops and confirm positive restart, and check the condition of work and tool holding. Inspect electrical wiring, pneumatic lines, and hydraulic hoses for damage. Identify housekeeping hazards such as slips, trips, and falls. Guidance promotes isolating the machine and raising eMaint actions as needed to improve compliance, operator safety, and machine uptime.
by Mac Barry, from the Community
Downloads: 0
Get
Template
Hurco VMX Weekly Safety Checklist
This weekly checklist helps operators of Hurco VMX machine centres perform a structured safety review. It covers confirming fixed guards are secure, ensuring no machine movement occurs without the correct interlocks and guarding, and testing that emergency stops are in good condition and require a positive action to restart. It prompts isolation steps and raising an eMaint where issues are found. The checklist also verifies the condition of work and tool holding equipment, checks for visible damage to electrical, pneumatic, and hydraulic components, confirms interlocks are fitted and functioning, and identifies general hazards such as slips, trips, and falls. Designed to support compliant, safe machining operations.
by Jim Hollins, from the Community
Downloads: 0
Get

GRINDERBENCH2 Weekly Safety Check

This weekly bench grinder safety checklist helps operators and supervisors verify the GRINDERBENCH2 is safe to use. Confirm fixed guards are secure and in good condition, emergency stops function correctly and require positive restart, and work and tool holding equipment is in a safe condition. Check electrical components and wiring for damage and note visible hazards such as slips, trips and falls. Use this template to standardize inspections, document issues, isolate equipment when needed, and raise maintenance actions to maintain compliance and protect workers.

by Mac Barry, from the Community

Get

Template

Andmar 618-TS Grinder Weekly Safety Check

This weekly safety checklist is designed for the Andmar 618-TS grinder to help operators and maintenance teams verify machine safety before use. Inspect fixed guards, confirm interlocks prevent unintended movement, and test emergency stops and restart procedures. Record isolation steps and raise maintenance requests as needed. Review workholding, electrical and hydraulic components for visible damage, and note any housekeeping hazards such as slips, trips, and falls. Use this template to standardize inspections, document findings, and keep grinding operations safe and compliant.

by Mac Barry, from the Community

Get

Template

Hurco VM20i Weekly Safety Check Template

This weekly safety checklist is designed for the Hurco VM20i CNC machining center to help teams perform consistent inspections. Verify fixed guards and interlocks, ensure there is no automatic movement without correct guarding, test emergency stops and confirm positive restart, and check the condition of work and tool holding. Inspect electrical wiring, pneumatic lines, and hydraulic hoses for damage. Identify housekeeping hazards such as slips, trips, and falls. Guidance promotes isolating the machine and raising eMaint actions as needed to improve compliance, operator safety, and machine uptime.

by Mac Barry, from the Community

Get

Template

Hurco VMX Weekly Safety Checklist

This weekly checklist helps operators of Hurco VMX machine centres perform a structured safety review. It covers confirming fixed guards are secure, ensuring no machine movement occurs without the correct interlocks and guarding, and testing that emergency stops are in good condition and require a positive action to restart. It prompts isolation steps and raising an eMaint where issues are found. The checklist also verifies the condition of work and tool holding equipment, checks for visible damage to electrical, pneumatic, and hydraulic components, confirms interlocks are fitted and functioning, and identifies general hazards such as slips, trips, and falls. Designed to support compliant, safe machining operations.

by Jim Hollins, from the Community

Get

M300 Lathe Weekly Safety Check

About author

You might also like

GRINDERBENCH2 Weekly Safety Check

Andmar 618-TS Grinder Weekly Safety Check

Hurco VM20i Weekly Safety Check Template

Hurco VMX Weekly Safety Checklist

You might also like

GRINDERBENCH2 Weekly Safety Check

Andmar 618-TS Grinder Weekly Safety Check

Hurco VM20i Weekly Safety Check Template

Hurco VMX Weekly Safety Checklist