Template

Ingersoll Rand MOX Final Inspection Checklist

This final inspection checklist supports quality control for Ingersoll Rand MOX rotary compressor packages. It guides inspectors to document data plates, label verifications, starter box wiring and schematics, fastener torque marks, seals and glands, pipe clearances and bend radii, solenoid security, oil level, cooler and motor nameplates, and overall cleanliness. Capture photos of all sides and critical components, rate exterior condition, and sign off to complete the audit.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Gardner Denver MOX Final Inspection Checklist

This final inspection checklist for Gardner Denver MOX rotary compressor packages guides inspectors through a complete quality check before shipment or handover. Verify machine exterior condition and capture photos of all sides; confirm Gardner Denver sticker placement and model match; document white path labels and inspection labels inside the starter box. Inspect starter box wiring and schematics, ensure wires are secured, organized, and glands and ports are sealed. Check cleanliness inside the machine, confirm torque marks on fasteners, clearances on pipes with proper bend radius, and secure solenoids. Validate oil level via sight glass and correct oil cap installation. Record cooler, main drive motor, and fan motor data plates. Finish by tagging the starter box and signing off. Ideal for rotary assembly quality assurance and audit readiness.

by james.mcelfresh@irco.com, from the Community

Get

Template

Visual Inspection Report Template

This visual inspection report template supports manufacturing quality control for finished goods. Inspect and document all product sides, open box, final packaging, table and information labels, and optional components such as controllers and certificates of compliance. Capture photos, add comments, and standardize evidence collection with bilingual prompts in English and Spanish for consistent audits and traceability across work orders and material numbers.

by Luis Zermeno, from the Community

Get

Template

Quality Control Structure Inspection Checklist

This quality control structure inspection checklist helps manufacturing teams verify critical structural and assembly requirements from layout through final assembly. It covers skid and frame fit up, mounting holes, lifting eyes, and dimensional checks; digital level readings with tight tolerances; coil supports and brackets; primer and coating readiness; and staged inspections for first and final assembly. It guides verification of floors, walls, fan rings, access doors, bearings, shafts, fans, and motor installation, including required torque values. The checklist captures photo evidence, IDs for welders and inspectors, unit identification, and green tag release to ensure traceability, compliance, and consistent quality.

by Chase Ramirez, from the Community

Get

Template

TFS Manufacturing Quality Control Checklist

This weekly manufacturing quality control checklist supports consistent product quality across your operation. It guides auditors through visual checks and measurements, welding and fastener verification, bearing grease and insulation review, and inspection of motors, blowers, pipes, hinges, wiring labels, filters, and doors. Functional tests cover electric motors and VFDs, lifters, temperature and head pad sensors, load cells, linear actuators, and cameras. It also includes documentation verification for manuals, schematics, training guides, and stickers, followed by final sign off.

by Neil O'Brien, from the Community

Get

Template

30HP Vacuum Service Report

This 30HP vacuum service report template helps field teams inspect and document the condition of vacuum skids used on rigs and industrial sites. Check tank welds, mufflers, knock out tank components, sight glass seals, and oil levels. Function-test vacuum and discharge valves, inspect oil pumps, lines, and filters, and confirm all bolts are secure. Verify electrical systems including starter box hardware, cable glands, plugs, and motor wiring. Ensure proper installation and grounding, keep power cables off the ground, and capture photos throughout.

by Cesar Sepulveda, from the Community

Get

Template

Final Visual Inspection Checklist

This Final Visual Inspection checklist supports manufacturing quality assurance for Motorpact medium voltage cubicles. It guides inspectors to record document numbers, work orders, project names, and cubicle types such as FVNR, RVSS, and LV Box. The checklist covers front, lateral, and rear views, key locks, MV doors, earthing mechanisms, cable connections, and fuse collars. It prompts verification of contactors and nameplates, MVC and control boards, CPU and main power boards, as well as VT, CPT, and CT serial numbers. Inspectors review main busbar and bushing conditions, capture required photos, and complete summary sign offs for checked by and approved by before shipment.

by ANDRIYANTO andriyanto, from the Community

20+

Get