Template

EASA Accreditation Audit Checklist AR100-2015

by Rehan Shaffi, from the Community

30+

This EASA Accreditation Audit Checklist aligns with AR100-2015 to evaluate service centers that repair three-phase squirrel-cage motors. It covers audit planning, scope, and scoring, then assesses housekeeping, technician training, and internal audits. Technical sections verify identification and condition, terminals, cooling systems, shafts, bearings, lubrication, frames, rotors, and balancing. It includes accessories testing, winding removal and core integrity, rewind specifications, winding build quality, impregnation, insulation and coil testing, high-potential tests, bearing insulation, no-load performance, finishing, handling, and comprehensive calibration. Annex A lists required electrical, mechanical, and physical equipment and verification requirements.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
HPT Safety Review Checklist
Use this internal HPT Safety Review checklist to inspect manufacturing areas including Sizing, Winding, Insulation, Lamination, Core and Coil, Testing, Final Assembly, Warehouse, Fabrication, VPD, and Grounds. Verify housekeeping, fire extinguishers, AED and eyewash status, chemical storage, machine guarding, lockout and tagout and alternate energy procedures, ladders and fall protection, electrical cords and GFCIs, and forklift and crane operations. Includes prompts for training records, blue card for overhead work, scoring guidance, and space to note hazards, photos, and corrective actions.
by Jerome Stevenson, from the Community
Downloads: 0
Get
Template
HSE Site Audit Checklist
This free HSE Site Audit checklist helps teams evaluate construction site safety and compliance. Review site board information, insurance and accreditation, project details and the Construction Phase Health and Safety Plan. Verify fire plans, signage and site rules; check first aid, eyewash and emergency equipment; confirm permits to dig and hot work; and review RAMS, COSHH, manual handling and vibration assessments. Inspect PPE use and condition, equipment registers, PAT testing, access and egress, isolations, and controls for noise, dust and vibration. Record inductions, training and toolbox talks, document incidents and near misses, and capture corrective actions to improve safety performance.
by Andre Ranussi, from the Community
Downloads: 0
Get
Template
BA EASA Part 145 Audit Checklist
Assess compliance with EASA Part 145 using this comprehensive audit checklist for aviation maintenance organisations. Review scope and approval terms, facilities and storage, personnel competence and man-hour planning, certifying staff requirements, equipment and tool calibration, acceptance of components, maintenance data control, production planning, release to service, maintenance records, occurrence reporting, safety and quality policies, and the maintenance organisation exposition. Use for internal audits of line and base maintenance to document findings, capture corrective actions, and support continued validity of approval.
by Glenn William Jones, from the Community
Downloads: 0
Get
Template
Internal Technical Audit Checklist
This internal technical audit checklist helps garment and textile manufacturers assess end to end production quality. It covers warehouse controls, fabric inspection, shrinkage testing and shade segregation, trims and accessories verification, lab testing, size set and pilot runs, line feeding, sewing construction, fusing and heat transfer checks, needle and sharp tools management, end line and finishing inspections, pressing, packaging audits, finished goods warehousing, safety and housekeeping, equipment calibration and preventive maintenance, and training and documentation. Use it to standardize SOPs, maintain compliance, traceability and FIFO, reduce defects, and improve efficiency across cutting, sewing, washing, and finishing.
by Eng.Md. Imran sharif, from the Community
Downloads: 0
Get

EASA Accreditation Audit Checklist AR100-2015

About author

You might also like

HPT Safety Review Checklist

HSE Site Audit Checklist

BA EASA Part 145 Audit Checklist

Internal Technical Audit Checklist

You might also like

HPT Safety Review Checklist

HSE Site Audit Checklist

BA EASA Part 145 Audit Checklist

Internal Technical Audit Checklist