Skip to content
SafetyCulture
Template

Control Measures for PPM on 24 DS Equipment

by Joanne Talbot, from the Community

Downloads: 0
Get this template

This planned preventive maintenance checklist outlines the required control measures for working on 24 DS equipment. It covers key hazards such as slips, trips, falls, sharp edges, manual handling, nip points, and electrical risks. It specifies mandatory PPE including nitrile and cut resistant gloves and eye protection. It details equipment isolation steps for power and compressed air, lockout procedures, safe use of portable steps, good housekeeping, and guard removal and replacement. It reinforces that lubrication must not occur while equipment is running, stresses two person handling where needed, and requires dynamic risk assessment for any additional hazards. Final steps include area cleanup, tool removal, and sign off before handover to production.

With SafetyCulture you can

Digitize any process, procedure or policy
Eliminate mistakes made by paper-based processes
Create and share professional reports instantly
Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy
Eliminate mistakes made by paper-based processes
Create and share professional reports instantly
Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .