Template

Workover Rig Safety Inspection Checklist

by Shawn Wells, from the Community

80+

A comprehensive Workover Rig Safety Inspection checklist for oil and gas operations. It helps verify site signage and access, H2S controls and monitoring, muster area setup, training and PPE compliance, pre job meetings and JSA, fall protection, first aid and emergency response readiness, eyewash availability, hearing protection, and lockout and tagout. The checklist covers mud pump, tanks, and mixing areas, generator and electrical systems, fire protection, fuel and flammable storage, pipe racks, blowout preventer installation and testing, derrick and sub structure, rig floor operations, power and hand tools, hoisting and lifting equipment, stairs, ladders, and guard rails, rig carrier and trailers, and material handling equipment. References include OSHA 1910 and industry recommended practices such as RP54, RP4G, RP9B, and RP53 to support compliance and safe work execution.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
LEG Workover Rig Safety Inspection Checklist 2020
This LEG workover rig safety inspection checklist supports well servicing and workover operations. It covers site setup and rig-up, guying systems, mast and derrick integrity, rig cab and carrier checks, drawworks and winch safety, traveling blocks and elevators, operator controls and kill switch, work floor safeguards, power tong and backup, blowout preventer installation and testing, hand tool condition, mud and circulation systems, material handling equipment, safety equipment, vehicles, and doghouse lighting. The checklist references relevant practices for BOPs, H2S awareness, lockout tagout, fall protection, and housekeeping to help teams meet AESC and industry standards.
by Kenneth Phillips, from the Community
Downloads: 10+
Get
Template
Monthly Drilling Rig Audit Checklist
This monthly drilling rig audit checklist helps oil and gas teams inspect drilling and well servicing operations for safety and compliance. Built around OSHA guidance and API/ANSI standards (including RP54, RP53, RP500), it covers drill site setup, signage, muster and emergency planning, crew training, PPE, H2S/SO2 monitoring, first aid, communication, and documentation. Audit sections include mud pumps, mixing areas, tanks and pits, material handling and forklifts, generator and electrical systems, fire protection, fuel and flammable storage, pipe racks, blowout preventers, derrick and substructure, drill floor, power and hand tools, hoisting equipment, stairs and guardrails, and confined spaces/excavations. Use it to verify BOP testing, equipment condition, lighting, housekeeping, labeling, and controls, and to document findings and sign-offs for continuous improvement.
by Kenneth Phillips, from the Community
Downloads: 10+
Get
Template
OSHA Rig Inspection Checklist by Edge Services
Use this OSHA compliant rig inspection checklist to assess oil and gas drilling and well servicing operations. It covers site access and signage, training and PPE, mud pumps, mixing, tanks and pits, generator and electrical systems, fire protection, fuel and storage tanks, pipe rack safety, blowout preventers, derrick and substructure, drill floor standards, power and hand tools, hoisting equipment, stairs and ladders, hot work and welding, and confined spaces including H2S controls. Reference points include OSHA 1910 and 1926 and API RP 53 and 54 to help standardize inspections, capture evidence, and document corrective actions.
by Doug Carter, from the Community
Downloads: 10+
Get
Template
Sheridan Production Drilling Rig Inspection
This drilling rig inspection checklist helps oil and gas teams verify safety and compliance across the site. It covers JSEA paperwork, signage, wind indicators, fuel tank venting, electrical grounding, accumulators, and housekeeping. Sections include stairs and guardrails, derrick and substructure, rig floor equipment and controls, fuel and mud tanks, mud pump area, choke manifold, pipe racks, and blowout preventers. It also checks eyewash and first aid, fall protection, lighting, H2S monitors, PPE, communication, and emergency muster areas.
by Jennifer Turner, from the Community
Downloads: 20+
Get

Workover Rig Safety Inspection Checklist

About author

You might also like

LEG Workover Rig Safety Inspection Checklist 2020

Monthly Drilling Rig Audit Checklist

OSHA Rig Inspection Checklist by Edge Services

Sheridan Production Drilling Rig Inspection

You might also like

LEG Workover Rig Safety Inspection Checklist 2020

Monthly Drilling Rig Audit Checklist

OSHA Rig Inspection Checklist by Edge Services

Sheridan Production Drilling Rig Inspection