Template

Somerville Fire Brigade Hose Testing

by Adam Holt, from the Community

Comprehensive hose testing checklist for Somerville Fire Brigade operations. Includes safety briefing, PPE requirements, no go zone rules, endorsed pump operator, 1400 KPA 3 minute test steps, monthly schedules, pass or fail recording, coupling checks, defect notes, hose condemnation, drying and drying guidance, and hose number allocations.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
EC Hose Test Checklist
This EC Hose Test checklist is designed for fire departments and emergency teams to document annual hose testing across apparatus. Record details for 1 inch, 1.75 inch, 2.5 inch, and 5 inch hose lines, including diameter, length, color, and hose number. Log any failures or leaks, attach photos of failed hoses, and note whether the hose was removed from service. The template prompts creation of a service request audit for failed hoses and supports structured record keeping for compliance and readiness.
by NAFD IL, from the Community
Downloads: 0
Get
Template
Hose Audit Checklist
This Hose Audit checklist helps teams systematically inspect industrial hoses for safety and reliability. Capture hose identification details, labeling, pressure ratings, and inspection dates. Document hose type, application, chemical medium, temperature ranges, maximum service pressure, and environmental conditions. Assess hose condition for damage, abrasion, bulges, or delamination, and verify end fitting integrity, threads, corrosion, and accessories. Confirm whip checks are fitted and in good condition. Use this template to strengthen preventive maintenance, reduce risk, and support regulatory compliance across manufacturing and industrial sites.
by Matt Anderson, from the Community
Downloads: 10+
Get
Template
Fire Hose Box and Hydrant Quarterly Checklist
Use this quarterly checklist to inspect fire hose boxes and fire hydrants across your site. Record the condition of hydrants and hose boxes, confirm the number of hoses and nozzles, and assess hose and nozzle condition. Mark items as Good, Fair, Poor, or N/A, and capture date, time, and inspector signature. This template supports routine fire safety maintenance, ensuring equipment is accessible, functional, and compliant, with space to note issues and corrective actions for follow-up.
by Howard Mason, from the Community
Downloads: 10+
Get
Template
Test Hose Audit Checklist
This Test Hose Audit template helps maintenance and safety teams verify hose identification and condition for safe industrial operations. Record site, date, preparer, location, and serial numbers, then assess hose marking and labels, unique ID visibility, pressure rating, green cable tie, intended test medium, and inspection date. Inspect hose condition for outer cover damage, abrasion, deformation or cuts, bulges, and delamination. Check end fittings for seal surface damage, thread damage, and corrosion. Confirm whip checks are installed and in good condition. Use this checklist to document issues, prioritize corrective actions, and maintain compliance and traceability across equipment and sites.
by Simon Graham, from the Community
Downloads: 0
Get

EC Hose Test Checklist

This EC Hose Test checklist is designed for fire departments and emergency teams to document annual hose testing across apparatus. Record details for 1 inch, 1.75 inch, 2.5 inch, and 5 inch hose lines, including diameter, length, color, and hose number. Log any failures or leaks, attach photos of failed hoses, and note whether the hose was removed from service. The template prompts creation of a service request audit for failed hoses and supports structured record keeping for compliance and readiness.

by NAFD IL, from the Community

Get

Template

Hose Audit Checklist

This Hose Audit checklist helps teams systematically inspect industrial hoses for safety and reliability. Capture hose identification details, labeling, pressure ratings, and inspection dates. Document hose type, application, chemical medium, temperature ranges, maximum service pressure, and environmental conditions. Assess hose condition for damage, abrasion, bulges, or delamination, and verify end fitting integrity, threads, corrosion, and accessories. Confirm whip checks are fitted and in good condition. Use this template to strengthen preventive maintenance, reduce risk, and support regulatory compliance across manufacturing and industrial sites.

by Matt Anderson, from the Community

10+

Get

Template

Fire Hose Box and Hydrant Quarterly Checklist

Use this quarterly checklist to inspect fire hose boxes and fire hydrants across your site. Record the condition of hydrants and hose boxes, confirm the number of hoses and nozzles, and assess hose and nozzle condition. Mark items as Good, Fair, Poor, or N/A, and capture date, time, and inspector signature. This template supports routine fire safety maintenance, ensuring equipment is accessible, functional, and compliant, with space to note issues and corrective actions for follow-up.

by Howard Mason, from the Community

10+

Get

Template

Test Hose Audit Checklist

This Test Hose Audit template helps maintenance and safety teams verify hose identification and condition for safe industrial operations. Record site, date, preparer, location, and serial numbers, then assess hose marking and labels, unique ID visibility, pressure rating, green cable tie, intended test medium, and inspection date. Inspect hose condition for outer cover damage, abrasion, deformation or cuts, bulges, and delamination. Check end fittings for seal surface damage, thread damage, and corrosion. Confirm whip checks are installed and in good condition. Use this checklist to document issues, prioritize corrective actions, and maintain compliance and traceability across equipment and sites.

by Simon Graham, from the Community

Get

Somerville Fire Brigade Hose Testing

About author

You might also like

EC Hose Test Checklist

Hose Audit Checklist

Fire Hose Box and Hydrant Quarterly Checklist

Test Hose Audit Checklist

You might also like

EC Hose Test Checklist

Hose Audit Checklist

Fire Hose Box and Hydrant Quarterly Checklist

Test Hose Audit Checklist