Template

Solar PV Practical Completion Inspection Checklist

by Dean Calcutt, from the Community

Ensure new solar PV installations are ready for handover with this practical completion inspection checklist. Verify inverter mounting and ventilation, generation meter placement, DC isolators, AC and DC cabling, labelling, consumer unit configuration, and BS7671 compliance. Assess roof array alignment, brackets, rails, cable routing, and boundaries. Confirm documentation, fire service sticker, homeowner demonstration, and final signoff.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Solar PV Practical Completion Inspection
Use this practical completion inspection template to verify residential or commercial solar PV installations before handover. Check inverter location, fixings, labeling, ventilation, and clearances; confirm AC/DC isolators, meter access, cable runs, and BS7671 compliance. Inspect array mounting, brackets, ties, bird guards, roof tile condition, and boundaries. Ensure schematics, fire service sticker, and homeowner demonstration are provided. Capture sign-off from inspector and client.
by Dean Calcutt, from the Community
Downloads: 0
Get
Template
Solar PV Quality Inspection Form
This Solar PV Quality Inspection Form helps teams verify residential or commercial solar installations against design and safety requirements. Assess array mounting and brackets, roof condition and clearances, shading risks, bird protection, and secure DC cabling. Check consumer unit protection, labeling, separation of AC and DC cables, surge protection, and correct operation of AC/DC isolators. Confirm inverter and battery mounting, ventilation, earthing, and access in loft spaces, plus fire detection where required. Includes customer satisfaction checks, notes, media capture, and sign offs for QA and corrective actions.
by Anthony Roach, from the Community
Downloads: 10+
Get
Template
Solar Quality Inspection Form
This solar quality inspection form helps teams verify the workmanship and safety of PV installations. It covers customer handover details, panel alignment and array boundaries, protection and routing of DC cabling, fasteners and mounting hardware, and checks for broken tiles. Electrical sections confirm neat cable management, correct inverter installation, sealed penetrations, presence of a PV schematic, clear labeling of isolators, and identification in the consumer unit. Use it to document findings, capture signatures, and ensure a safe, compliant installation across residential or commercial solar projects.
by Miguel Pinto, from the Community
Downloads: 0
Get
Template
Solar Inspection Form
Use this Solar Inspection Form to evaluate residential or commercial solar PV installations. Sections cover system details, inverter mounting and labeling, electrical checks including meters, DC isolators, AC/DC cable routing, consumer units, and mains isolation. Roof inspection includes array alignment, rail trimming, cable management, 300 mm boundaries, bird protection, and tile condition. Add required stickers and schematics, capture installation photos, and complete a customer satisfaction questionnaire. Record declarations and dates to document compliance.
by Peter Adnitt, from the Community
Downloads: 0
Get

Solar PV Practical Completion Inspection

Use this practical completion inspection template to verify residential or commercial solar PV installations before handover. Check inverter location, fixings, labeling, ventilation, and clearances; confirm AC/DC isolators, meter access, cable runs, and BS7671 compliance. Inspect array mounting, brackets, ties, bird guards, roof tile condition, and boundaries. Ensure schematics, fire service sticker, and homeowner demonstration are provided. Capture sign-off from inspector and client.

by Dean Calcutt, from the Community

Get

Template

Solar PV Quality Inspection Form

This Solar PV Quality Inspection Form helps teams verify residential or commercial solar installations against design and safety requirements. Assess array mounting and brackets, roof condition and clearances, shading risks, bird protection, and secure DC cabling. Check consumer unit protection, labeling, separation of AC and DC cables, surge protection, and correct operation of AC/DC isolators. Confirm inverter and battery mounting, ventilation, earthing, and access in loft spaces, plus fire detection where required. Includes customer satisfaction checks, notes, media capture, and sign offs for QA and corrective actions.

by Anthony Roach, from the Community

10+

Get

Template

Solar Quality Inspection Form

This solar quality inspection form helps teams verify the workmanship and safety of PV installations. It covers customer handover details, panel alignment and array boundaries, protection and routing of DC cabling, fasteners and mounting hardware, and checks for broken tiles. Electrical sections confirm neat cable management, correct inverter installation, sealed penetrations, presence of a PV schematic, clear labeling of isolators, and identification in the consumer unit. Use it to document findings, capture signatures, and ensure a safe, compliant installation across residential or commercial solar projects.

by Miguel Pinto, from the Community

Get

Template

Solar Inspection Form

Use this Solar Inspection Form to evaluate residential or commercial solar PV installations. Sections cover system details, inverter mounting and labeling, electrical checks including meters, DC isolators, AC/DC cable routing, consumer units, and mains isolation. Roof inspection includes array alignment, rail trimming, cable management, 300 mm boundaries, bird protection, and tile condition. Add required stickers and schematics, capture installation photos, and complete a customer satisfaction questionnaire. Record declarations and dates to document compliance.

by Peter Adnitt, from the Community

Get

Solar PV Practical Completion Inspection Checklist

About author

You might also like

Solar PV Practical Completion Inspection

Solar PV Quality Inspection Form

Solar Quality Inspection Form

Solar Inspection Form

You might also like

Solar PV Practical Completion Inspection

Solar PV Quality Inspection Form

Solar Quality Inspection Form

Solar Inspection Form