Template

Rate 3 Street Lighting Inspection Rev 5

by Leon Robinson, from the Community

This Rate 3 Street Lighting Inspection Rev 5 checklist guides field crews through safe, compliant pole inspections and maintenance. Capture site conditions, pole ID and access, full pole and label photos, and luminaire type and wattage. Verify label visibility, level and tightness, PE cell condition and operation, and confirm all LED modules are working. Log faults and abnormalities, record rectification actions, and attach completion photos. Confirm the site is tidy, hatches secured, circuits restored, traffic control removed, waste cleared, and document incidents before sign-off.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Rate 3 Street Lighting Inspection Rev 3
This Rate 3 street lighting inspection template guides crews through pole and luminaire checks, including capturing street address, pole ID, photos, luminaire type and wattage, label visibility, mechanical and electrical integrity, PE cell replacement, LED module operation, and abnormalities. It also covers site controls such as SWMS sign on, safety observer and traffic controllers, site housekeeping, traffic control device removal, waste disposal, and incident reporting, with signature capture on completion.
by Leon Robinson, from the Community
Downloads: 0
Get
Template
Rate 3 Street Lighting Inspection REV4
This Rate 3 Street Lighting inspection template guides field crews through a full pole assessment: capture pole ID and location, photograph the pole and number, record luminaire type and wattage, verify Rate 3 and pole ID labels, check tight and level mounting, clean fittings, and note abnormalities such as insect infestation, incorrect wiring, missing isolators or fuses. Confirm operation, count non-working LEDs, replace PE cell if needed, add completion photos, and verify the site is left tidy with hatches secured, waste removed, traffic control cleared, and any incidents logged with signatures.
by Leon Robinson, from the Community
Downloads: 0
Get
Template
Rate 3 Street Lighting Inspection Checklist
This Rate 3 street lighting inspection checklist helps field crews inspect poles and luminaires, verify labels and pole IDs, capture photos, and record luminaire types and wattage. It guides checks for tight and level fittings, gasket condition, PE cell replacement, LED module operation, and common fault causes such as failed circuit breakers or isolators and loss of power. The template includes top down pole inspections, safety observer and traffic controller details, site housekeeping, tagging out equipment, and final completion steps to ensure lights and circuits are restored safely.
by Leon Robinson, from the Community
Downloads: 0
Get
Template
Rate 3 Street Lighting Inspection Rev7
This Rate 3 street lighting inspection checklist helps field teams inspect and maintain roadway lighting assets. Capture pole location, access, photos, luminaire type and size, and confirm label visibility. Check luminaire fit and operation, gaskets, photocell, and LED modules. Diagnose common faults such as loss of power, isolator or circuit breaker issues, wiring errors, or water ingress. Conduct a top down pole inspection to identify damage, missing components, or pests. Verify the site is left tidy, hatches secured, and switchboards closed. Record traffic control removal, waste disposal, any incidents or near misses, and tag outs that need follow up. Attach signatures to complete the record.
by Leon Robinson, from the Community
Downloads: 0
Get

Rate 3 Street Lighting Inspection Rev 5

About author

You might also like

Rate 3 Street Lighting Inspection Rev 3

Rate 3 Street Lighting Inspection REV4

Rate 3 Street Lighting Inspection Checklist

Rate 3 Street Lighting Inspection Rev7

You might also like

Rate 3 Street Lighting Inspection Rev 3

Rate 3 Street Lighting Inspection REV4

Rate 3 Street Lighting Inspection Checklist

Rate 3 Street Lighting Inspection Rev7