Template

Linbrooke Technical Jointing Audit

by Keith Wigley, from the Community

30+

This Linbrooke Technical Jointing Audit template supports safe, compliant power cable jointing in the field. It guides teams through site preparation, access and egress checks, positive cable identification, and complete cable preparation steps including PPE, tools, and correct stripping procedures. It covers pre commissioning and post commission testing, joint completion practices such as order of connections, shrouding, insulation, and staggering, and ensures documentation accuracy with work pack completion. The checklist concludes with site clearance, debriefing, and final sign off to close out non conformances.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Jointing Audit Checklist for Utilities
This jointing audit template helps supervisors and field teams assess the safety and quality of power distribution jointing works. It covers job documentation and permits, site setup and traffic management, PPE and uniform checks, tool and vehicle condition, calibration and insulated equipment, live working controls, and essential safety gear including first aid, fire extinguisher, cat and genny, spill kit, and hygiene provisions. It also verifies NERS passports and required tickets. Use it to standardize field audits, capture notes, and drive compliance across streetworks and cable jointing operations.
by Amylee Tiley, from the Community
Downloads: 10+
Get
Template
VSZ Build Copper and Fibre Jointing QA Checklist
This telecom quality assurance checklist supports copper and fibre jointing and network build activities. It covers design handover, approvals and records, safety and worksite controls, exchange and cabinet installation, OFDF and MDF workmanship, cable haul and duct lay, microduct drilling and laying, manhole and joint chamber preparation, fibre jointing and closures, copper jointing and heat shrink closures, pressure systems, aerial and buried service leads, pillars and terminals, customer premises OFDF and testing, UFB flexibility points, and building distributors. It also includes OTDR test evidence, network labelling, documentation updates, and reinstatement and site tidy requirements to meet standards and readiness for service.
by Mel Dawson, from the Community
Downloads: 20+
Get
Template
Tape and Jointing Inspection Checklist
This tape and jointing inspection checklist supports quality assurance for plasterboard and drylining works. It covers preparation and conditions, including clean, dry surfaces and taped joints at walls and ceilings. Application steps include installing movement joints where required, fitting and aligning angle and edge beads, applying jointing coats, rubbing down, and cleaning out electrical boxes and skirting lines. A de snag and making good section ensures imperfections are filled and sanded after the mist coat. Final sign off captures contractor approvals and comments to standardize workmanship and site cleanliness.
by Alex Dobra, from the Community
Downloads: 0
Get
Template
Tape and Jointing Quality Assurance Checklist
This quality assurance checklist supports drywall tape and jointing work on construction sites. It covers pre start handover, site cleanliness and protection, board condition and dryness, correct fixings and secure boards, square and plumb corners, and adequate ambient temperature and lighting. It verifies taping and jointing to specification, including paper tape use and multi layer compound application feathered beyond each pass, and confirms finished surfaces meet a 3 mm tolerance. Final steps include cleaning floors, removing materials and waste, and sign off to prepare the area for following trades.
by Radu Porcescu, from the Community
Downloads: 0
Get

Linbrooke Technical Jointing Audit

About author

You might also like

Jointing Audit Checklist for Utilities

VSZ Build Copper and Fibre Jointing QA Checklist

Tape and Jointing Inspection Checklist

Tape and Jointing Quality Assurance Checklist

You might also like

Jointing Audit Checklist for Utilities

VSZ Build Copper and Fibre Jointing QA Checklist

Tape and Jointing Inspection Checklist

Tape and Jointing Quality Assurance Checklist