Template

Inverter Mounting Inspection Checklist

by Roy de Bie, from the Community

This inspection checklist helps verify that inverters are mounted correctly and safely. It guides teams to capture site details and the number of units, then assess whether the mounting structure is vertically level, installed at the correct angle, constructed with suitable materials, free from damage, and positioned with the required ground clearance. Use it to standardize quality checks during installation or maintenance, document findings, and ensure compliance with internal and regulatory requirements.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Solar Inspection Report: Ground and Above Ground

This solar site inspection report template helps teams inspect both ground-mounted and roof-mounted PV installations. It covers general site conditions, fencing and access control, working-at-heights equipment, vegetation management, and mounting structure integrity. Inspectors review PV modules for alignment, damage, cleanliness, earthing and bonding, and perform thermal checks and continuity tests. Electrical sections include cable routing and protection, DC combiners, inverter condition and performance, AC distribution boards, and protection devices. It also includes weather station and monitoring systems checks, energy meter verification, AC/DC voltage and current measurements, IV curve testing, and insulation resistance tests, with space to note findings and actions.

by Ryan van Deventer, from the Community

Get

Template

MEWP Inspection Checklist

This MEWP inspection checklist helps teams confirm safe setup and operation of mobile elevating work platforms. Record site, date, preparer, location, and equipment details such as make, model, and serial number. Verify the MEWP is suitable for the task and that operators are trained and authorized. Check that the pre use inspection is complete, the work area is free of hazards, and required manuals and a fire extinguisher are on the unit. Confirm fall protection and 100 percent tie off, keep the basket clear of debris, ensure the platform is level within manufacturer limits, and do not use the MEWP to hoist or pull materials. Note any defects and escalate before use.

by Pedro Galindo, from the Community

10+

Get

Template

Working at Height Site Inspection Checklist

This working at height site inspection checklist supports safer construction work above or below ground level. It guides teams to assess risks, confirm suitable access and fall protection, ensure equipment is maintained and correctly installed by competent persons, and verify worker training, information, and supervision. It also prompts preparation of method statements, permits, rescue and retrieval plans, and records corrective actions for continuous improvement.

by Mark Jackson, from the Community

30+

Get

Template

Scaffolding Safety Inspection Checklist

This scaffolding safety inspection checklist helps verify that a newly installed scaffold is safe for use. Capture general details, confirm a solid base and correct base plates and sole plates, and check that height and guardrails meet regulatory requirements. Inspect geometry, platforms, and bracing, ensure tubes and fittings are in good condition and properly tightened, and confirm safe access with correctly positioned ladders. Review load capacity, even distribution of materials, and adequate ties. Verify guard rails and toe boards, and ensure a current scaffold tag is displayed and completed. Record issues, add photos, and document recommendations to maintain site safety and compliance.

by Christine "Kelly" Cravey, from the Community

Get

Template

Fire Inspection Checklist

This fire inspection checklist helps teams record site details, verify that fire points are free from defects, confirm extinguisher service dates, and assess whether enough fire points are positioned around the site. Capture notes and photos, assign actions, and add signatures for accountability. Ideal for construction sites and facility walkthroughs, the template is easily customized in SafetyCulture to match your standards and local requirements so you can keep people and property safe.

by Stefan Rogers, from the Community

10+

Get

Template

Waste Clearance Checklist

Use this Waste Clearance checklist to plan and document safe removal of waste on site. Record site and customer details, date, and clearance team. Verify the work area is free of hazards, confirm correct PPE, and that it is safe to proceed. Capture before and after photos from the same position, list items cleared, and estimate the waste volume in cubic meters. Add a brief description of materials removed and capture a signature for accountability and compliance.

by Ed Fry, from the Community

Get