Template

HL 1 - Confined Space Entry Checklist

by Jonathan Bruce, from the Community

10+

This HL 1 confined space entry checklist helps teams verify readiness before entering tanks and other confined spaces. It covers permits to work, toolbox talks or JSA, training and rescue competencies, gas testing and calibration, personal gas detectors, communications and radios, emergency equipment, PPE, tripod and sentry setup, signage, barriers, lighting, and hazard controls. Use it to improve compliance and reduce risk across industrial operations.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Confined Space Entry Task Inspection Checklist

This confined space entry task inspection checklist helps teams plan and document safe entry into tanks, pits, silos and other confined spaces. Verify permits and isolation, continuous atmospheric monitoring, calibrated gas testing equipment, ventilation and lighting, communications, trained sentry, sign in and sign out, access and egress, and a rehearsed rescue plan. Use it alongside your SWMS or job safety analysis to support compliance and reduce risk before work begins, and capture corrective actions, assignees and due dates as needed.

by Cassandra Cook, from the Community

20+

Get

Template

Confined Space Inspection Checklist

Use this confined space inspection checklist to manage safe entry and work in confined spaces. Verify permits and clearances, gas monitoring results, isolations, housekeeping, ventilation, and SWMS. Check signage, safe access, communications, standby personnel, rescue procedures and equipment, PPE, and low-voltage lighting. Capture photos, record findings, and sign off to document compliance and readiness before entry.

by Evan Downie, from the Community

10+

Get

Template

Confined Space Entry Audit Checklist

This confined space entry audit checklist helps water and wastewater utility teams verify safe setup and execution of confined space work. It covers site setup and barricading, required equipment such as harnesses, tripods, breathing apparatus, and gas detectors, pre entry gas checks, isolations, permits, training and minimum crew requirements, continuous gas monitoring, communications, and hot work controls. Use it to document completion steps, corrective actions, and signatures from the responsible officer, auditor, and contractor representative to strengthen compliance and safety.

by James Pither, from the Community

30+

Get

Template

Confined Space Critical Control Checklist

Use this confined space critical control checklist to plan and verify safe entry. It guides teams through permits, hazard assessment, atmospheric testing for oxygen, H2S, CO and LEL, energy isolation, standby sentry and communications, and rescue planning. Align work with competency requirements and ensure continuous monitoring, supervision, and effective emergency response before and during confined space tasks.

by Thomas Harrison, from the Community

50+

Get

Template

Confined Space Entry Inspection Checklist

Use this confined space entry inspection checklist to ensure a safe entry process on worksites. Verify permits are in place, signage is posted, personnel are trained and competent, and atmospheric testing has been conducted with calibrated gas detectors. Confirm barriers, communications, safe access, standby person, low-voltage lighting, PPE, ventilation, isolation and purging of services, entry and exit logs, and emergency rescue equipment and plans. Designed as a starting point for construction and civil works teams.

by Henno Ferreira, from the Community

10+

Get

Template

Confined Space Pre-Entry Checklist

Use this Confined Space Pre-Entry Checklist to prepare for safe entry and support your permit to work process. It covers inductions and CSE training, risk assessment and safe work instructions, energy isolation checks, atmospheric testing and continuous monitoring, hot work controls, access and lighting, rescue planning and on-site rescuers, communications, respiratory and fall protection, ventilation, barricading, and emergency procedures. Includes PPE requirements and space for site-specific hazards.

by Stephen Crawshaw, from the Community

30+

Get