Template

Hitachi Slipring Inspection

by Jordan Tomasone, from the Community

Use this Hitachi slipring inspection checklist to document wind turbine maintenance. Capture customer and site details, technicians and signatures, brush condition before and after, epoxied slipring connections, and torque checks to 29.4 Nm. Record whether any nuts spun and degrees, confirm all hardware used, and log micro ohm meter results for K, L, and M phases. Note tower online status, add photos, explanations, and findings to standardize inspections.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Hitachi Wye-Ring Repair Checklist
Use this wind turbine generator repair report to document Hitachi wye-ring work from inspection to completion. Capture nacelle condition, brush box, slipring serial numbers and photos, rotor and generator internals, and bearing type and replacements. Record connection isolation, cracks, shim stacks and bolt lengths, and insulations. Log high-speed coupler type, axial measurements pre and post torque, and torque values. Balance results target < 0.08 mm/s with applied weights. Confirm tower status, add findings, and attach verification photos for a complete maintenance record.
by Jerome Berger, from the Community
Downloads: 10+
Get
Template
Hitachi 350-5 Excavator Inspection Checklist
Use this Hitachi 350-5 excavator checklist to standardize daily pre-start inspections and document defects. Operators can verify fuel, engine oil, hydraulic oil, and radiator levels; inspect tyres, tracks, bucket pins and linkages; test lights, reversing alarms, horns, beacons, cameras, and control switches; check hydraulic hoses, rams, guards, hand rails, mirrors, and seat belts; and confirm height and slew restrictors are operational. The form also captures permit to break ground, lift, and overhead clearances, plus comments, dates, and signatures. Customize for your site and complete on mobile to improve safety and maintenance compliance.
by Alex Topping, from the Community
Downloads: 10+
Get
Template
Wind Farm Inspection Checklist
This wind farm inspection checklist helps teams systematically assess onshore wind turbines and site infrastructure. It covers site access and signage, external tower condition, coatings and corrosion protection, contamination, foundations, lighting and alarms, internal tower condition, electrical switchgear including SF6 status and accessories, basement lighting and moisture, housekeeping, movable platforms and fall protection, logbooks and inspection records, safety equipment such as extinguishers, first aid kits, and eye wash stations, and detailed blade checks. Use this template to standardize inspections, document findings with notes and photos, assign actions, and export reports to support safe, efficient operations and maintenance.
by Adrian Detmer, from the Community
Downloads: 0
Get
Template
Turbine inspection
A detailed inspection protocol for wind turbine maintenance and safety assessment. This comprehensive checklist covers all critical aspects of turbine inspection, including site access, tower externals, internal components, transformer checks, safety equipment verification, and operational systems. The guide includes specific sections for blade inspection, gearbox maintenance, generator status, and various cabinet checks. It ensures thorough documentation of all safety protocols, mechanical components, and electrical systems while maintaining compliance with industry standards. The checklist also addresses retrofit systems, aviation lighting, and ice detection, concluding with proper return-to-service procedures. This systematic approach helps maintain turbine efficiency and safety while documenting all inspection findings.
by Chris Hale, from the Community
Downloads: 70+
Get

Hitachi Wye-Ring Repair Checklist

Use this wind turbine generator repair report to document Hitachi wye-ring work from inspection to completion. Capture nacelle condition, brush box, slipring serial numbers and photos, rotor and generator internals, and bearing type and replacements. Record connection isolation, cracks, shim stacks and bolt lengths, and insulations. Log high-speed coupler type, axial measurements pre and post torque, and torque values. Balance results target < 0.08 mm/s with applied weights. Confirm tower status, add findings, and attach verification photos for a complete maintenance record.

by Jerome Berger, from the Community

10+

Get

Template

Hitachi 350-5 Excavator Inspection Checklist

Use this Hitachi 350-5 excavator checklist to standardize daily pre-start inspections and document defects. Operators can verify fuel, engine oil, hydraulic oil, and radiator levels; inspect tyres, tracks, bucket pins and linkages; test lights, reversing alarms, horns, beacons, cameras, and control switches; check hydraulic hoses, rams, guards, hand rails, mirrors, and seat belts; and confirm height and slew restrictors are operational. The form also captures permit to break ground, lift, and overhead clearances, plus comments, dates, and signatures. Customize for your site and complete on mobile to improve safety and maintenance compliance.

by Alex Topping, from the Community

10+

Get

Template

Wind Farm Inspection Checklist

This wind farm inspection checklist helps teams systematically assess onshore wind turbines and site infrastructure. It covers site access and signage, external tower condition, coatings and corrosion protection, contamination, foundations, lighting and alarms, internal tower condition, electrical switchgear including SF6 status and accessories, basement lighting and moisture, housekeeping, movable platforms and fall protection, logbooks and inspection records, safety equipment such as extinguishers, first aid kits, and eye wash stations, and detailed blade checks. Use this template to standardize inspections, document findings with notes and photos, assign actions, and export reports to support safe, efficient operations and maintenance.

by Adrian Detmer, from the Community

Get

Template

Turbine inspection

A detailed inspection protocol for wind turbine maintenance and safety assessment. This comprehensive checklist covers all critical aspects of turbine inspection, including site access, tower externals, internal components, transformer checks, safety equipment verification, and operational systems. The guide includes specific sections for blade inspection, gearbox maintenance, generator status, and various cabinet checks. It ensures thorough documentation of all safety protocols, mechanical components, and electrical systems while maintaining compliance with industry standards. The checklist also addresses retrofit systems, aviation lighting, and ice detection, concluding with proper return-to-service procedures. This systematic approach helps maintain turbine efficiency and safety while documenting all inspection findings.

by Chris Hale, from the Community

70+

Get

Hitachi Slipring Inspection

About author

You might also like

Hitachi Wye-Ring Repair Checklist

Hitachi 350-5 Excavator Inspection Checklist

Wind Farm Inspection Checklist

Turbine inspection

You might also like

Hitachi Wye-Ring Repair Checklist

Hitachi 350-5 Excavator Inspection Checklist

Wind Farm Inspection Checklist

Turbine inspection