Template

Crew Audit for Metering and Utility Specialists

by Tom Williams, from the Community

This crew audit checklist supports utility metering crews and contractors in the field. It captures job details and conditions, applies life saving rules (gloves, cover up, shunts, tags), and verifies job preparation such as tailgate briefings, radio checks, and CMV pre trips. It reviews PPE and FR clothing, inspections of rubber gloves and sleeves, fall protection, vehicle setup and storage, fire extinguishers, and first aid kits. Traffic control practices are checked including beacons, cones, signage, vests, and flaggers. General work practices cover tool condition, live line tool testing, hand lines, ladders, adequate cover up, qualifications, guarding, and crew communication including direction of feed and nearest protection device. The audit concludes with notes, photos, and verification signatures to document safe work procedures.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Crew Safety Audit Gloves Cover-Up Grounds and Tags
Use this electric utility crew safety audit to assess linework tasks and PPE compliance. Capture job details, energized status, overhead or underground, and the four life saving rules: gloves, cover-up, grounds, and tags. Verify tailboards, LOTO, vehicle and aerial unit checks, and PPE including FR clothing, rubber gloves and sleeves, and fall protection. Confirm grounding practices, traffic control, tool condition, communication, and qualified personnel. Add notes, photos, and signatures for verification.
by Tom Williams, from the Community
Downloads: 0
Get
Template
Sparks Distribution Crew Safety Audit Checklist
This Sparks Distribution Crew Audit checklist helps utilities and contractors assess jobsite safety for electric linework. Verify tailgate briefings, dispatch location, and energy source controls. Confirm use and condition of PPE including hard hats, eye and hand protection, safety boots, FR clothing, rubber gloves, and fall protection. Check grounding practices, truck and bucket setup, wheel chocks, outrigger pads, and traffic control with strobes, cones, signage, and reflective vests. Review tools, live line equipment, cover-up, qualified personnel, observers, and crew communication, then capture verification signatures and photos.
by Mike Roberts, from the Community
Downloads: 10+
Get
Template
Shared Services Crew Observation Checklist
This shared services crew observation checklist supports electrical utility field operations. Review job planning, crew competency, and site conditions; verify PPE use, fall protection, and FR clothing; check vehicles, trailers, equipment grounding, and DOT compliance. Cover climbing practices, overhead construction and maintenance, and energized work with proper cover-up and approach distances. Ensure tool condition and housekeeping, implement traffic control with signage and flagging, assess URD excavation safety and lifting methods, and inspect hot sticks and live-line tools. Use it to drive safer, compliant crew performance.
by Ben Bella, from the Community
Downloads: 0
Get
Template
DPC JT and S Crew Inspection
This utility crew inspection checklist supports safe electric distribution and line work. It covers pre job brief and tailgate review, crew roles, PPE and arc rated clothing, conductor work and grounding, lockout tagout practices, aerial device setup and operation, climbing and pole work, neutrals, URD trenching and cabinet safety, traffic control and flagging, vehicle and trailer checks, equipment and tool condition, ropes slings and hoists, hot sticks and live line tools, and rubber goods and test dates. Use it to verify qualified personnel, proper cover up, safe lifting, positive load control, and compliance across substations and field operations.
by Kraig Gay, from the Community
Downloads: 10+
Get

Crew Audit for Metering and Utility Specialists

About author

You might also like

Crew Safety Audit Gloves Cover-Up Grounds and Tags

Sparks Distribution Crew Safety Audit Checklist

Shared Services Crew Observation Checklist

DPC JT and S Crew Inspection

You might also like

Crew Safety Audit Gloves Cover-Up Grounds and Tags

Sparks Distribution Crew Safety Audit Checklist

Shared Services Crew Observation Checklist

DPC JT and S Crew Inspection