Template

Thermal Imaging and Inverter Performance Report

by Ken Czajka, from the Community

This template helps teams assess solar PV systems by combining thermal imaging with a detailed inverter performance test. Capture site details, weather, irradiance, and temperatures at the time of inspection. Add thermal images, note discrepancies, and record temperature differentials with likely causes. Verify anti-islanding protection and document results. Log inverter identifiers, DC input and AC output parameters, and any faults observed. Use the structured sections and general comments to create a clear, traceable report that supports troubleshooting and ongoing PV system reliability.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Solar PV O and M Scheduled Inspection
This Solar PV Operations and Maintenance scheduled inspection checklist supports structured site visits for photovoltaic systems. Sections cover general site conditions, module cleanliness and shading, racking and flashing, inverter condition, fuse checks and torque verification, module wiring and connectors, DC and AC combiners and disconnects, monitoring access and device status, point of interconnection, conduit integrity, and roof penetrations. It also guides thermal imaging and electrical performance tests, including open circuit voltage, maximum power current, irradiance, anti‑islanding, and recording inverter parameters, with space for findings and recommended actions.
by Ken Czajka, from the Community
Downloads: 0
Get
Template
ASP Solar Thermal Inspections Checklist
Use this ASP Solar Thermal Inspections checklist to assess solar energy systems with thermal imaging. Record site and PPM details, work order number, date, preparer, and location. Verify the supply main switch and distribution board or MCBs, check AC cabling, inverter imaging, DC isolators, and combiner boxes, and inspect solar panels. Capture issues found and follow up actions. For guidance only; seek professional advice for your jurisdiction.
by Clare Healy, from the Community
Downloads: 0
Get
Template
Solar O&M Annual Site Visit for Subcontractors
This annual solar O&M site visit checklist guides subcontractors through a complete inspection of PV systems. It captures site details, access, and equipment specifications, then walks through racking, modules, wiring and connectors, inverters, DC and AC combiners, and monitoring equipment. It includes interconnection checks, conduit and wiring condition, and thermal imaging of key components. Electrical performance testing covers Voc, Imp, irradiance by string, and anti-islanding verification, with documentation of inverter parameters and any faults. Use it to record findings, photos, recommended actions, and string test results for reliable, compliant operation.
by Ken Czajka, from the Community
Downloads: 0
Get
Template
Solar Service Report Template for PV Systems
This Solar Service Report template helps technicians assess the condition and performance of photovoltaic systems. Record company and job details then work through solar module and mounting checks, verify wiring supports and earthing, review DC isolators and labeling, and complete ground level inverter inspections. Conduct anti islanding checks and document timings, capture string test data including polarity irradiance open circuit voltage and short circuit current, and note inverter production outputs. Finish with repair actions and overall service comments.
by Flora Connelly, from the Community
Downloads: 10+
Get

Thermal Imaging and Inverter Performance Report

About author

You might also like

Solar PV O and M Scheduled Inspection

ASP Solar Thermal Inspections Checklist

Solar O&M Annual Site Visit for Subcontractors

Solar Service Report Template for PV Systems

You might also like

Solar PV O and M Scheduled Inspection

ASP Solar Thermal Inspections Checklist

Solar O&M Annual Site Visit for Subcontractors

Solar Service Report Template for PV Systems