Template

Work Area Inspection Checklist

by Grant Ziarno, from the Community

20+

This work area inspection checklist helps supervisors and compliance teams review site housekeeping, segregation of people and plant, permits and PPE, lifting and electrical equipment, storage of fuels and chemicals, excavations, edge protection, access and egress, parking, signage, and environmental controls. Use it to document observed tasks, responsible crews, locations, and corrective actions during routine safety audits across construction and maintenance sites.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Health and Safety Site Inspection Report V3.1
Use this Health and Safety Site Inspection Report to review construction sites for compliance and risk control. Document project details, current activities, and the status of corrective actions. Verify site management practices, inductions, first aid, and construction phase plans. Check risk assessments, COSHH, emergency procedures, traffic management, and PPE. Record required registers and permits including working at height, lifting equipment, excavations, and hot works. Assess housekeeping, access and egress, segregation, plant condition, dust, noise, lighting, welfare, waste, chemicals, signage, and incidents.
by Zoe Cutts, from the Community
Downloads: 10+
Get
Template
Site Weekly Inspection Checklist
This weekly site inspection checklist helps supervisors assess construction site safety and compliance. It covers health and safety documentation, inductions, toolbox talks, and training records. Inspect site security, welfare facilities, first aid, manual handling, and PPE. Verify scaffolding, working platforms, edge protection, mobile towers, ladders, and mobile plant. Check permits to work, hot work, excavations, and power tools including PAT testing. Review traffic management, fire safety, storage of materials, chemicals and fuels, noise levels, safety signage, overall tidiness, and any accidents, incidents, or near misses.
by Alfie Smallwoods, from the Community
Downloads: 0
Get
Template
Casey Health Safety and Welfare Report
Use this construction site health, safety and welfare report template to evaluate documentation and planning, inductions and training records, welfare and emergency procedures, first aid, site signage and security, traffic management, environmental and waste controls, plant and vehicles, permits and fire protection, electrical safety, underground and overhead services, access and egress, work at height, scaffolding and edge protection, excavations and confined spaces, temporary works, slips trips and falls, noise vibration and dust, PPE, housekeeping and COVID-19 measures. Capture notes and photos to document compliance and corrective actions.
by Robert Clegg, from the Community
Downloads: 0
Get
Template
Safe and Sound Services Site Inspection Checklist
This site inspection checklist helps supervisors and auditors record site conditions at the time of a visit and verify compliance with construction safety requirements. It covers general safety and signage, induction and permits, PPE control, site welfare, emergency procedures and first aid. Dedicated sections address working at height and edge protection, scaffolds and access, ladders, excavations and barriers, plant and vehicle movements, power and hand tools, manual handling, use of chemicals with SDS, and work on mains services.
by Dave Foy, from the Community
Downloads: 10+
Get

Health and Safety Site Inspection Report V3.1

Use this Health and Safety Site Inspection Report to review construction sites for compliance and risk control. Document project details, current activities, and the status of corrective actions. Verify site management practices, inductions, first aid, and construction phase plans. Check risk assessments, COSHH, emergency procedures, traffic management, and PPE. Record required registers and permits including working at height, lifting equipment, excavations, and hot works. Assess housekeeping, access and egress, segregation, plant condition, dust, noise, lighting, welfare, waste, chemicals, signage, and incidents.

by Zoe Cutts, from the Community

10+

Get

Template

Site Weekly Inspection Checklist

This weekly site inspection checklist helps supervisors assess construction site safety and compliance. It covers health and safety documentation, inductions, toolbox talks, and training records. Inspect site security, welfare facilities, first aid, manual handling, and PPE. Verify scaffolding, working platforms, edge protection, mobile towers, ladders, and mobile plant. Check permits to work, hot work, excavations, and power tools including PAT testing. Review traffic management, fire safety, storage of materials, chemicals and fuels, noise levels, safety signage, overall tidiness, and any accidents, incidents, or near misses.

by Alfie Smallwoods, from the Community

Get

Template

Casey Health Safety and Welfare Report

Use this construction site health, safety and welfare report template to evaluate documentation and planning, inductions and training records, welfare and emergency procedures, first aid, site signage and security, traffic management, environmental and waste controls, plant and vehicles, permits and fire protection, electrical safety, underground and overhead services, access and egress, work at height, scaffolding and edge protection, excavations and confined spaces, temporary works, slips trips and falls, noise vibration and dust, PPE, housekeeping and COVID-19 measures. Capture notes and photos to document compliance and corrective actions.

by Robert Clegg, from the Community

Get

Template

Safe and Sound Services Site Inspection Checklist

This site inspection checklist helps supervisors and auditors record site conditions at the time of a visit and verify compliance with construction safety requirements. It covers general safety and signage, induction and permits, PPE control, site welfare, emergency procedures and first aid. Dedicated sections address working at height and edge protection, scaffolds and access, ladders, excavations and barriers, plant and vehicle movements, power and hand tools, manual handling, use of chemicals with SDS, and work on mains services.

by Dave Foy, from the Community

10+

Get

Work Area Inspection Checklist

About author

You might also like

Health and Safety Site Inspection Report V3.1

Site Weekly Inspection Checklist

Casey Health Safety and Welfare Report

Safe and Sound Services Site Inspection Checklist

You might also like

Health and Safety Site Inspection Report V3.1

Site Weekly Inspection Checklist

Casey Health Safety and Welfare Report

Safe and Sound Services Site Inspection Checklist