Template

West Coast Industrial Coatings Field Audit

by Brian Nilson, from the Community

10+

Use this field audit checklist to assess industrial coating operations on site. Cover general data, training and hazard briefings, electrical safety (GFCI, grounded generators, LOTO), equipment guards and inspections, PPE availability and fit, hand safety, work near waterways, respirators, fall protection plans and rescues, confined space permits and gas monitoring, and other issues. Record deficiencies, repairs, and safety concerns, then capture sign-off from the site representative and auditor.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Field Risk Management Assessment
This Field Risk Management Assessment checklist helps teams evaluate construction site safety and compliance. It covers field safety paperwork, daily pre-use inspections for aerial lifts and equipment, toolbox talks, and required permits including excavation, confined space, hot work, scaffolding, and critical lifts. Sections address PPE, fall protection, ladders and stairways, scaffolding standards, aerial lift use, concrete and masonry controls, excavation safety, vehicles and heavy equipment, cranes and rigging, confined space procedures, fire prevention, compressed gas cylinders, electrical safety and GFCI use, hand and power tools, silica exposure controls, and housekeeping. It concludes with space for positive observations, comments, and sign-off by the safety representative, superintendent, and foreman.
by Mike Schultz, from the Community
Downloads: 10+
Get
Template
Gallant Industrial Safety Audit Checklist
Conduct a comprehensive industrial safety audit for construction sites. This checklist covers behavior-based safety, housekeeping, job site postings, first aid readiness, PPE, fall protection, ladders, tools and equipment, excavations, confined space, electrical controls and lockout, fire safety, rigging and hoisting, scaffolding, crane operations, heavy equipment use, and hazard communication. Use it to identify hazards, verify training and inspections, and drive corrective actions to improve site safety and compliance.
by Miguel Rios, from the Community
Downloads: 0
Get
Template
Management Safety Audit Checklist
This management safety audit checklist helps supervisors evaluate site safety and compliance on construction projects. It covers administrative controls, housekeeping, fire prevention, PPE and respiratory protection, abrasive blasting, fall protection, hand and power tools, electrical safety and lockout procedures, vehicles and powered industrial trucks, HAZCOM and spill preparedness, ladders, scaffolding setup and tagging, confined space permits and monitoring, hazardous material operations and decontamination, welding and cutting with hot work permits, and hoisting and rigging practices. It concludes with space for comments, corrective actions, and sign-offs by the inspector and site supervisor.
by Nasser Rodriguez, from the Community
Downloads: 0
Get
Template
Site Safety Audit (Daily) Checklist
Perform a quick, daily site safety audit covering PPE, housekeeping, equipment checks, permits, and key OSHA requirements including confined space, LOTO, fall protection, hot work, electrical safety, excavation, and more. Capture photos, comments, and signatures, log hazards, and document corrective actions to improve compliance and site safety.
by Brandon McCurry, from the Community
Downloads: 0
Get

Field Risk Management Assessment

This Field Risk Management Assessment checklist helps teams evaluate construction site safety and compliance. It covers field safety paperwork, daily pre-use inspections for aerial lifts and equipment, toolbox talks, and required permits including excavation, confined space, hot work, scaffolding, and critical lifts. Sections address PPE, fall protection, ladders and stairways, scaffolding standards, aerial lift use, concrete and masonry controls, excavation safety, vehicles and heavy equipment, cranes and rigging, confined space procedures, fire prevention, compressed gas cylinders, electrical safety and GFCI use, hand and power tools, silica exposure controls, and housekeeping. It concludes with space for positive observations, comments, and sign-off by the safety representative, superintendent, and foreman.

by Mike Schultz, from the Community

10+

Get

Template

Gallant Industrial Safety Audit Checklist

Conduct a comprehensive industrial safety audit for construction sites. This checklist covers behavior-based safety, housekeeping, job site postings, first aid readiness, PPE, fall protection, ladders, tools and equipment, excavations, confined space, electrical controls and lockout, fire safety, rigging and hoisting, scaffolding, crane operations, heavy equipment use, and hazard communication. Use it to identify hazards, verify training and inspections, and drive corrective actions to improve site safety and compliance.

by Miguel Rios, from the Community

Get

Template

Management Safety Audit Checklist

This management safety audit checklist helps supervisors evaluate site safety and compliance on construction projects. It covers administrative controls, housekeeping, fire prevention, PPE and respiratory protection, abrasive blasting, fall protection, hand and power tools, electrical safety and lockout procedures, vehicles and powered industrial trucks, HAZCOM and spill preparedness, ladders, scaffolding setup and tagging, confined space permits and monitoring, hazardous material operations and decontamination, welding and cutting with hot work permits, and hoisting and rigging practices. It concludes with space for comments, corrective actions, and sign-offs by the inspector and site supervisor.

by Nasser Rodriguez, from the Community

Get

Template

Site Safety Audit (Daily) Checklist

Perform a quick, daily site safety audit covering PPE, housekeeping, equipment checks, permits, and key OSHA requirements including confined space, LOTO, fall protection, hot work, electrical safety, excavation, and more. Capture photos, comments, and signatures, log hazards, and document corrective actions to improve compliance and site safety.

by Brandon McCurry, from the Community

Get

West Coast Industrial Coatings Field Audit

About author

You might also like

Field Risk Management Assessment

Gallant Industrial Safety Audit Checklist

Management Safety Audit Checklist

Site Safety Audit (Daily) Checklist

You might also like

Field Risk Management Assessment

Gallant Industrial Safety Audit Checklist

Management Safety Audit Checklist

Site Safety Audit (Daily) Checklist