Template

Wall Tie Inspection Checklist

by Mark Griffiths, from the Community

Use this wall tie inspection checklist to document property details and external conditions, capture photos of all elevations, and assess finishes, cracks, access and obstructions. Record insulation status, cavity depth, and the condition of existing wall ties with borescope evidence. Enter surveyor findings and dates, and complete a dynamic risk assessment covering hazards such as asbestos, working at height, manual handling, electricity, noise, vibration, hand tools, mobile elevating work platforms and housekeeping.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Wall Tie Installation Report
Use this Wall Tie Installation Report template to document masonry tie works and verify quality on site. Capture property details, tenure, and client, then complete an external inspection with photos of all elevations. Record the external finish, note any obstructions or access issues, and confirm asbestos checks. During installation, verify cavity wall insulation status and any previous extraction, confirm elevations are clear, and check that new wall ties are installed as recommended and corroded ties are isolated. Log making good, pull test results, and upload photos of finishes and ties. Add a concise surveyor’s statement with date and name. A dynamic risk assessment section covers common site hazards including ladders, towers, manual handling, roof work, electricity, vibration, noise, compressed air, cement and mortar, MEWP use, housekeeping, reversing vehicles, and lone working, followed by client declaration and signatures.
by Mark Griffiths, from the Community
Downloads: 0
Get
Template
Cavity Wall Insulation Post-Installation Survey
Use this post-installation survey to verify the quality of cavity wall insulation. Record client and property details, tenure and building finish, access requirements, and installer information. Capture photos of all elevations and drill patterns, note materials used and m2 covered, and sign off with assessor details. A built-in dynamic risk assessment covers hazards such as asbestos, overhead cables, work at height, manual handling, vibration, noise, housekeeping, MEWP or scaffold use, and lone working.
by Mark Griffiths, from the Community
Downloads: 10+
Get
Template
Cavity Wall Tie and CWI Condition Assessment Report
Use this cavity wall tie and cavity wall insulation condition assessment report template to evaluate exterior wall construction and cavity integrity. Record whether the property is commercial or domestic, note construction type such as brick, block, timber framed, steel framed, or non traditional, and capture cavity width. Identify wall tie types including twist ties galvanised, butterfly, slotted frame, or wire ties, and rate their condition from good to failed. Assess cavity condition for debris, insulation, and compacted rubble. Summarise findings and document clear recommendations and actions.
by Lee Gregory, from the Community
Downloads: 10+
Get
Template
Ridgewater Energy Insulation Survey Checklist
This insulation survey checklist helps assess homes and small buildings for cavity wall and loft insulation. It guides surveyors through client and property details, structure and external condition, heating types, access and safety, and suitability checks. Dedicated sections cover cavity wall elevations, vents, borescope photos, cavity depth and omitted areas, plus loft ventilation, existing and proposed insulation depths, downlights, wiring, pipes and tanks, and clearance needs. It includes dynamic risk assessments for both cavity wall and loft work and references PAS 2030 Annex B requirements and ECO/GBIS scheme considerations. Use it to document findings, capture photos, record measurements, and provide recommendations for compliant, efficient installs.
by Steve Bright, from the Community
Downloads: 0
Get

Wall Tie Installation Report

Use this Wall Tie Installation Report template to document masonry tie works and verify quality on site. Capture property details, tenure, and client, then complete an external inspection with photos of all elevations. Record the external finish, note any obstructions or access issues, and confirm asbestos checks. During installation, verify cavity wall insulation status and any previous extraction, confirm elevations are clear, and check that new wall ties are installed as recommended and corroded ties are isolated. Log making good, pull test results, and upload photos of finishes and ties. Add a concise surveyor’s statement with date and name. A dynamic risk assessment section covers common site hazards including ladders, towers, manual handling, roof work, electricity, vibration, noise, compressed air, cement and mortar, MEWP use, housekeeping, reversing vehicles, and lone working, followed by client declaration and signatures.

by Mark Griffiths, from the Community

Get

Template

Cavity Wall Insulation Post-Installation Survey

Use this post-installation survey to verify the quality of cavity wall insulation. Record client and property details, tenure and building finish, access requirements, and installer information. Capture photos of all elevations and drill patterns, note materials used and m2 covered, and sign off with assessor details. A built-in dynamic risk assessment covers hazards such as asbestos, overhead cables, work at height, manual handling, vibration, noise, housekeeping, MEWP or scaffold use, and lone working.

by Mark Griffiths, from the Community

10+

Get

Template

Cavity Wall Tie and CWI Condition Assessment Report

Use this cavity wall tie and cavity wall insulation condition assessment report template to evaluate exterior wall construction and cavity integrity. Record whether the property is commercial or domestic, note construction type such as brick, block, timber framed, steel framed, or non traditional, and capture cavity width. Identify wall tie types including twist ties galvanised, butterfly, slotted frame, or wire ties, and rate their condition from good to failed. Assess cavity condition for debris, insulation, and compacted rubble. Summarise findings and document clear recommendations and actions.

by Lee Gregory, from the Community

10+

Get

Template

Ridgewater Energy Insulation Survey Checklist

This insulation survey checklist helps assess homes and small buildings for cavity wall and loft insulation. It guides surveyors through client and property details, structure and external condition, heating types, access and safety, and suitability checks. Dedicated sections cover cavity wall elevations, vents, borescope photos, cavity depth and omitted areas, plus loft ventilation, existing and proposed insulation depths, downlights, wiring, pipes and tanks, and clearance needs. It includes dynamic risk assessments for both cavity wall and loft work and references PAS 2030 Annex B requirements and ECO/GBIS scheme considerations. Use it to document findings, capture photos, record measurements, and provide recommendations for compliant, efficient installs.

by Steve Bright, from the Community

Get

Wall Tie Inspection Checklist

About author

You might also like

Wall Tie Installation Report

Cavity Wall Insulation Post-Installation Survey

Cavity Wall Tie and CWI Condition Assessment Report

Ridgewater Energy Insulation Survey Checklist

You might also like

Wall Tie Installation Report

Cavity Wall Insulation Post-Installation Survey

Cavity Wall Tie and CWI Condition Assessment Report

Ridgewater Energy Insulation Survey Checklist