Template

Turner Safety Inspection

by Jacob Connor, from the Community

20+

The Turner Safety Inspection checklist helps supervisors conduct comprehensive construction site audits. Sections cover lean safety practices, manual material handling, administration, permit-required confined spaces, cranes, electrical, elevators and hoists, environmental health, excavations, fall protection, fire protection, hand and power tools, housekeeping, renovation and ICRA, ladders and stairs, medical and emergency readiness, motorized equipment, PPE, rigging, scaffolds, scissor and aerial lifts, site and public protection, steel erection, utilities and process systems, welding and cutting, and roofing. Use it to identify hazards, verify training and permits, document observations, and assign corrective actions.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
W. E. O'Neil Safety Audit Template
Audit construction sites against OSHA standards with this comprehensive checklist. Cover key areas including safety administration and emergency action plans; general PPE and head, eye, face, hand, hearing, and respiratory protection; housekeeping and fire prevention; rigging and material handling; hand and power tools; welding and cutting; electrical safety and GFCI use; scaffolds and aerial lifts; fall protection systems and plans; hoists and elevators; motor vehicles and mechanized equipment; excavations and trench safety; concrete and masonry operations; steel erection and controlled decking zones; stairways and ladders; permit-required confined spaces; and cranes and derricks. Use it to document daily, weekly, and periodic inspections, record deficiencies, and verify training and permits are in place.
by Abraham Bonilla, from the Community
Downloads: 0
Get
Template
AT Mechanical Safety Audit
This AT Mechanical safety audit checklist supports comprehensive construction site inspections. It covers administration and training records, confined spaces, cranes and hoisting, electrical safety and lockout/tagout, environmental controls, excavations, fall protection, fire prevention, hand and power tools, hazard communication, housekeeping, ladders and stairs, medical and emergency readiness, motorized equipment, PPE compliance, scaffolding, aerial lifts, and welding and cutting. Use it to verify documentation, equipment condition, worker competence, and site controls to reduce risk and improve compliance.
by Eric Zabinski, from the Community
Downloads: 10+
Get
Template
IX Audit 1.0.2 Construction Audit Checklist
IX Audit 1.0.2 is a construction site safety audit checklist designed to standardize inspections across key risk areas. Use it to review fall protection, ladders and stairs, excavations, confined spaces, motorized equipment, electrical controls, hand and power tools, manual handling, PPE, fire protection, housekeeping, medical and emergency readiness, HAZCOM, environmental controls, site and public protection, administration and training, welding and cutting, aerial lifts, cranes, rigging, and scaffolds. Capture photos, note issues, assign corrective actions, and document sign off.
by Eric Sears, from the Community
Downloads: 10+
Get
Template
Safety Audit - Full Construction Checklist
Use this full construction safety audit checklist to evaluate site conditions and compliance. Cover general conditions, emergency preparedness, housekeeping, power and hand tools, ladders, scaffolding, fall protection, fire prevention, equipment and mobile plant, trenching, rigging and cranes, PPE and respiratory protection, electrical, welding and cutting, stairs and access, aerial lifts, material handling, environmental controls, and administration. Capture observations, add photos, note issues, and assign corrective actions for follow-up.
by April Woelk, from the Community
Downloads: 10+
Get

Turner Safety Inspection

About author

You might also like

W. E. O'Neil Safety Audit Template

AT Mechanical Safety Audit

IX Audit 1.0.2 Construction Audit Checklist

Safety Audit - Full Construction Checklist

You might also like

W. E. O'Neil Safety Audit Template

AT Mechanical Safety Audit

IX Audit 1.0.2 Construction Audit Checklist

Safety Audit - Full Construction Checklist