Template

SWPPP Inspection Form

by Shawn Mann, from the Community

Use this SWPPP inspection form to evaluate construction site compliance with the EPA Construction General Permit. Capture NPDES tracking info, project details, weather and storm event data, and note any discharges. Inspect BMPs such as stabilized construction exits, silt fence, inlet protection, stockpiles, dumpsters and sanitary facilities, concrete washout, and staging areas. Check slopes and disturbed areas, perimeter controls, discharge points, and non-stormwater sources. Document noncompliance, assign corrective actions, and certify results to maintain stormwater pollution prevention.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
SWPPP Inspection Form Checklist for Construction
Streamline stormwater inspections with this SWPPP inspection form for construction sites. Record NPDES tracking details, weather and storm events, and site conditions. Check BMP installation and maintenance including silt fence, stabilized exits, inlets, and washout areas. Verify perimeter controls, protection of natural resources, and sediment management. Document discharges and incidents, assign corrective actions, and capture certification to meet EPA Construction General Permit requirements. Ideal for contractors, site managers, and inspectors.
by Mike User, from the Community
Downloads: 10+
Get
Template
SWPPP Compliance Inspection Form
Use this SWPPP Compliance Inspection Form to streamline stormwater inspections on construction sites. Capture project details, permit numbers, weather and rainfall data, and verify required SWPPP documentation is onsite and current. Inspect erosion and sediment controls, inlet protection, stabilized entrances, dust control, and housekeeping practices such as waste, chemical storage, and concrete washout. Document deficiencies with photos, set corrective actions and follow-up dates, and capture inspector and operator signatures.
by Stuart Nakutin, from the Community
Downloads: 10+
Get
Template
Construction Stormwater Inspection Checklist
This construction stormwater inspection checklist is designed to help project teams comply with NPDES Construction General Permit requirements. Use it to document weather, recent storm events, and verify the condition and effectiveness of erosion and sediment controls such as perimeter controls, silt fence alternatives, rock socks, and storm drain inlet protection along site boundaries and streets. Review pollution prevention practices including material storage, fueling, equipment maintenance, stockpile protection, concrete and paint washout, waste handling, and housekeeping. Confirm stabilization, minimize track-out and dust, inspect discharge points and conveyances, and record any additional BMPs needed. The form concludes with certification statements for the qualified inspector and SWMP administrator.
by Tom Power, from the Community
Downloads: 20+
Get
Template
SWPPP Inspection Form
An SWPPP inspection form is used by stormwater inspectors to verify if the stormwater pollution prevention plan (SWPPP) is being implemented and ensure that best management practices (BMPs) are properly installed in the construction site. Use this checklist to document SWPPP compliance and assign corrective actions for required maintenance of BMPs, any incidents of noncompliance, etc.
by SafetyCulture
Downloads: 400+
Get

SWPPP Inspection Form Checklist for Construction

Streamline stormwater inspections with this SWPPP inspection form for construction sites. Record NPDES tracking details, weather and storm events, and site conditions. Check BMP installation and maintenance including silt fence, stabilized exits, inlets, and washout areas. Verify perimeter controls, protection of natural resources, and sediment management. Document discharges and incidents, assign corrective actions, and capture certification to meet EPA Construction General Permit requirements. Ideal for contractors, site managers, and inspectors.

by Mike User, from the Community

10+

Get

Template

SWPPP Compliance Inspection Form

Use this SWPPP Compliance Inspection Form to streamline stormwater inspections on construction sites. Capture project details, permit numbers, weather and rainfall data, and verify required SWPPP documentation is onsite and current. Inspect erosion and sediment controls, inlet protection, stabilized entrances, dust control, and housekeeping practices such as waste, chemical storage, and concrete washout. Document deficiencies with photos, set corrective actions and follow-up dates, and capture inspector and operator signatures.

by Stuart Nakutin, from the Community

10+

Get

Template

Construction Stormwater Inspection Checklist

This construction stormwater inspection checklist is designed to help project teams comply with NPDES Construction General Permit requirements. Use it to document weather, recent storm events, and verify the condition and effectiveness of erosion and sediment controls such as perimeter controls, silt fence alternatives, rock socks, and storm drain inlet protection along site boundaries and streets. Review pollution prevention practices including material storage, fueling, equipment maintenance, stockpile protection, concrete and paint washout, waste handling, and housekeeping. Confirm stabilization, minimize track-out and dust, inspect discharge points and conveyances, and record any additional BMPs needed. The form concludes with certification statements for the qualified inspector and SWMP administrator.

by Tom Power, from the Community

20+

Get

Template

SWPPP Inspection Form

An SWPPP inspection form is used by stormwater inspectors to verify if the stormwater pollution prevention plan (SWPPP) is being implemented and ensure that best management practices (BMPs) are properly installed in the construction site. Use this checklist to document SWPPP compliance and assign corrective actions for required maintenance of BMPs, any incidents of noncompliance, etc.

by SafetyCulture

400+

Get

SWPPP Inspection Form

About author

You might also like

SWPPP Inspection Form Checklist for Construction

SWPPP Compliance Inspection Form

Construction Stormwater Inspection Checklist

SWPPP Inspection Form

You might also like

SWPPP Inspection Form Checklist for Construction

SWPPP Compliance Inspection Form

Construction Stormwater Inspection Checklist

SWPPP Inspection Form