Template

CDM 2015 Pre Construction Information Checklist

by Christopher Carlton, from the Community

300+

Use this CDM 2015 pre construction information and surveyor risk assessment checklist to plan safe surveys and works. Record project roles such as client and principal designer, confirm check in procedures and verify PPE. Identify site hazards including working at height, unsafe electrics, asbestos concerns, mould, unstable structures, traffic management and welfare. Capture existing drawings, services, permits, materials and no go areas. Summarize risks, note controls and share information with designers and contractors.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
CDM 2015 Pre-Construction Information Template
Use this structured form to gather pre-construction information required under CDM 2015. Capture client and principal contractor details, designer appointments, project scope, site conditions, services, hazardous materials, traffic and access, welfare and security, emergency procedures, KPIs, and site-specific hazards such as work at height, asbestos, electrical, noise, and excavation. The output supports preparing a compliant Construction Phase Plan and improving risk management before work begins.
by Jeff Lee, from the Community
Downloads: 0
Get
Template
CDM 2015 Pre-Construction Information Checklist
This CDM 2015 Pre-Construction Information template helps duty holders compile essential information for planning the construction phase. Capture client, principal contractor, and designer details; notifiability and F10 status; project scope, workforce and contractors; existing environment and services; hazardous materials and structural limits; site access, traffic, welfare, and security; fire and emergency procedures; building control and CDM health and safety file; communication processes and KPIs; and site-specific hazards such as work at height, asbestos, noise, heat, demolition, plant, excavations, isolations, and manual handling. Use it to inform a robust Construction Phase Plan.
by Jeff Lee, from the Community
Downloads: 10+
Get
Template
CDM Pre-Construction Information
This CDM Pre-Construction Information template helps clients, designers, and principal contractors compile the details required by the CDM 2015 Regulations before work begins. Capture project and stakeholder information, programme dates, existing services, fire strategy, asbestos and other hazards, site access and parking, welfare, working hours, noise and dust controls, emergency arrangements, and site rules. Use it to brief contractors, coordinate designs and temporary works, and build a comprehensive health and safety file for handover.
by Stephen Dawson, from the Community
Downloads: 10+
Get
Template
Pre-Start CDM Inspection Checklist
This pre-start CDM inspection checklist helps principal designers, contractors, and site managers verify readiness before construction begins. It covers project details, site occupancy, existing structures, adjacent property risks, asbestos and deleterious materials, live and underground services, traffic and access hazards, demolition, contaminated ground, excavation stability, scaffolding and erection sequence, mechanical and manual handling, work at height, hazardous substances, and construction pollution. It also prompts checks for reports and investigations, local authority restrictions, and site-wide arrangements such as access, welfare, phasing, and security. Use it to document hazards, plan controls, and support CDM compliance and safe project mobilization.
by Andrew Harris, from the Community
Downloads: 20+
Get

CDM 2015 Pre-Construction Information Template

Use this structured form to gather pre-construction information required under CDM 2015. Capture client and principal contractor details, designer appointments, project scope, site conditions, services, hazardous materials, traffic and access, welfare and security, emergency procedures, KPIs, and site-specific hazards such as work at height, asbestos, electrical, noise, and excavation. The output supports preparing a compliant Construction Phase Plan and improving risk management before work begins.

by Jeff Lee, from the Community

Get

Template

CDM 2015 Pre-Construction Information Checklist

This CDM 2015 Pre-Construction Information template helps duty holders compile essential information for planning the construction phase. Capture client, principal contractor, and designer details; notifiability and F10 status; project scope, workforce and contractors; existing environment and services; hazardous materials and structural limits; site access, traffic, welfare, and security; fire and emergency procedures; building control and CDM health and safety file; communication processes and KPIs; and site-specific hazards such as work at height, asbestos, noise, heat, demolition, plant, excavations, isolations, and manual handling. Use it to inform a robust Construction Phase Plan.

by Jeff Lee, from the Community

10+

Get

Template

CDM Pre-Construction Information

This CDM Pre-Construction Information template helps clients, designers, and principal contractors compile the details required by the CDM 2015 Regulations before work begins. Capture project and stakeholder information, programme dates, existing services, fire strategy, asbestos and other hazards, site access and parking, welfare, working hours, noise and dust controls, emergency arrangements, and site rules. Use it to brief contractors, coordinate designs and temporary works, and build a comprehensive health and safety file for handover.

by Stephen Dawson, from the Community

10+

Get

Template

Pre-Start CDM Inspection Checklist

This pre-start CDM inspection checklist helps principal designers, contractors, and site managers verify readiness before construction begins. It covers project details, site occupancy, existing structures, adjacent property risks, asbestos and deleterious materials, live and underground services, traffic and access hazards, demolition, contaminated ground, excavation stability, scaffolding and erection sequence, mechanical and manual handling, work at height, hazardous substances, and construction pollution. It also prompts checks for reports and investigations, local authority restrictions, and site-wide arrangements such as access, welfare, phasing, and security. Use it to document hazards, plan controls, and support CDM compliance and safe project mobilization.

by Andrew Harris, from the Community

20+

Get

CDM 2015 Pre Construction Information Checklist

About author

You might also like

CDM 2015 Pre-Construction Information Template

CDM 2015 Pre-Construction Information Checklist

CDM Pre-Construction Information

Pre-Start CDM Inspection Checklist

You might also like

CDM 2015 Pre-Construction Information Template

CDM 2015 Pre-Construction Information Checklist

CDM Pre-Construction Information

Pre-Start CDM Inspection Checklist