Template

Lagging and Labelling Checklist for Car Park MIF 14A

This construction checklist supports quality assurance for lagging and labelling works in a car park at Repton Gardens. It guides inspectors to confirm materials match specification, BCWS and LTHW pipework are insulated correctly, flow and return directions are labelled, gaps in lagging are taped, and all identification labels are applied. It includes sections for sign off, snag list, comments, photos, and supervisor approvals. Suitable for MEP installation checks by contractors and site managers.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Electrical and Mechanical Sign Off for Grid Ceilings

Use this practical sign off checklist to verify electrical and mechanical services before installing or closing grid ceilings. The form covers site details, floor and location, completion checks for services above ceiling, pipe lagging and labels, vent lagging and inspection grilles, lighting connections, and fire stopping. Capture company, job title, and signatures, and record readiness for the next activity. Designed to support construction quality assurance and client approvals. Always adapt to your project and regulatory requirements.

by Darren Reeves, from the Community

Get

Template

Car Park Inspection

safety checklist

by Simon Purton, from the Community

50+

Get

Template

Plumbing Communal 1st Fix QA Checklist

A practical MEP plumbing first fix quality assurance checklist for communal areas. It covers LTHW and boosted cold pipework, confirming pipe sizes, bracket spacing, wall penetrations and sleeving, correctly crimped fittings and expansion brackets, valve placement, clear labeling, insulation lagging, and documented pressure tests witnessed by the client. Includes level and block selection, drawing references, comments, and sign offs for contractor and client foremen.

by Sam Austin, from the Community

Get

Template

Car Park Lighting Audit Checklist

This car park lighting audit template helps facilities and electrical teams assess lighting across multi-level car parks. Record audit details, locations and levels, and document repairs such as starters and tubes replaced. Log replacements and materials used, capture earth readings in ohms, and note other faults to be fixed. Add photos, notes, and installation details to maintain a clear history of work completed. Use it to standardize inspections, prioritize maintenance, and keep car parks safe and compliant for users.

by Michael Sansom, from the Community

10+

Get

Template

M and E 1st Fix Ceiling Closure QA Checklist

This quality assurance checklist supports first fix ceiling closure for mechanical and electrical works. Use it to confirm all services above ceilings are installed, tested, and snag free before closure, including rainwater, drainage, heating, chilled water, water services, ductwork and lagging, electrical containment and wiring, accessories, sprinklers, controls and BMS, fire alarm, and security. Record site details, level and area, supervisor sign off, and employer approval to ensure a compliant handover and traceable documentation.

by Danny Denton, from the Community

Get

Template

Kingsbrook Void Closure MEP Services

This Kingsbrook void closure MEP services checklist helps teams plan and verify mechanical, electrical, and plumbing works during void closure activities. It includes sections for site details, level and room numbers, and itemized checks for cabling and containment, fire alarm systems, lighting, power, BMS, pipework, LTHW, BCWS, sprinklers, drainage, insulation, and ductwork. The template supports sign off by ESG and the main contractor, with name, signature, and company fields to document completion and accountability. Use it to standardize inspections, capture findings in the field, and generate a PDF report.

by Mark Clapson, from the Community

Get