Template

qldBUILT QA Roof Inspection Checklist

by Lance Holland, from the Community

Use this qldBUILT QA roof inspection checklist to assess roofing profile and colour, fascia alignment, gutter installation and overflows, valley cuts, flashings, screw lines, and roofing underlay. Confirm gutters are clear of debris, check for dents or scratches, and ensure all penetrations, skylights, TV aerials, and whirly birds are correctly installed, flashed, and sealed. Complete this inspection prior to removing roof access scaffolding to verify finish quality and compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Nautical Roofing Inspection Test Plan

A comprehensive inspection test plan for roofing projects by Nautical Roofing. Use this template to record site and contractor details, assess removal of existing materials including asbestos, and verify installation of wall and roof components to Australian standards. Cover battens, sarking, roof and wall sheets, penetrations, flashings, gutters, downpipes, and fascia. Check cleanliness and workmanship quality, complete inspections and tests, document housekeeping, attach scope and media, capture defects for rectification, and obtain builder and contractor sign off.

by Jeremy Broad, from the Community

10+

Get

Template

qldBUILT QA Framing Inspection Checklist

This qldBUILT QA framing inspection checklist helps builders and site supervisors verify wall and mid-floor framing, roof trusses, structural steel, tie-down rods, and bracing against plans and engineering requirements. Use it to confirm timber grades, layout, connectors, lintels, joist spans and hardware, balcony falls, and roof plane bracing before pre-sheet. Record findings, attach photos, note defects, and assign corrective actions. Includes prompts for certifier and engineer sign-offs and passive fire blocking, supporting compliance with NCC and structural design.

by Lance Holland, from the Community

10+

Get

Template

Roof Project End of Day Inspection Checklist

Streamline end-of-day closeout for roofing projects with this checklist. Verify work areas are clean, debris is removed, materials are secured or weighted down, roof penetrations are sealed, and temporary flashings are tight. Inspect surrounding and below areas to prevent leaks and restore them to normal appearance. Confirm scaffolds are locked and the site is safe before leaving. Ideal for contractors, supervisors, and site managers on commercial or residential roof jobs.

by Greg Obermeier, from the Community

Get

Template

Roofing and Cladding Inspection Test Plan (ITP)

This Roofing and Cladding Inspection Test Plan (ITP) helps construction teams verify compliance with architectural and manufacturer specifications. Check materials selection, gutter supports, roof battens, sumps, downpipes, and overflows against the latest drawings. Validate sarking and insulation vapor barriers, fixing methods, and roof spacers. Confirm correct sealing of box gutters, flashings, and penetrations. Record inspection findings, discussions, and nonconforming items, attach media evidence, and obtain signatures from the McPherson representative and site supervisor for completion and closeout.

by Jeremy Cameron, from the Community

50+

Get

Template

Roof Safety Inspection Checklist

This roof safety inspection checklist is designed for pre-access verification before working at height. It guides teams to record site details, list personnel on the roof, and confirm acceptable weather and training. Inspect access points and structural conditions, walkways, and roof areas. Verify PPE including harnesses and lanyards, check anchor installation and attachment, and note skylights or other openings to avoid. Confirm ladder setup, length, brackets, and a spotter. Capture photos, add recommendations, and complete with name and signature.

by Kim Flanagan, from the Community

10+

Get

Template

Hightown Roofing Permit

This Roofing Permit template helps plan and authorize roof work safely. Capture site details, roof type and condition, review roof information sheets, and define a safe system of work. Address controls for fall prevention and falling materials, specify safe access to roof level, and assess weather conditions before work begins. Use the form to document precautions, required protective equipment, duration, and signatures to confirm authorization and compliance for roofing activities.

by Richard Martin, from the Community

20+

Get