Template

QA/QC Aluminium Cladding Carrier Rails Checklist

by Pavel Mihaylov, from the Community

This QA/QC checklist supports on-site verification of aluminium cladding carrier rail installation. It guides inspectors to confirm vertical rails match design, the correct drawings and setting out are used, manufacturer guidelines are followed for fixed and sliding points, and the specified fixings are applied. Fields cover location, level and elevation or section, with space for client details and sign-off. Intended as a starting point for quality control on facade cladding systems.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
QA and QC Checklist for Brick Slips Helping Hand Rails
This QA and QC template supports inspections for brick slips helping hand rails during facade installation. Use it to record site, level and elevation details, confirm drawings and setting out, verify vertical rail positions, fixings, and sliding or fixed points meet manufacturer guidance, and capture client sign off. Ideal for contractors and installers standardizing quality checks on cladding support rails.
by Pavel Mihaylov, from the Community
Downloads: 0
Get
Template
QA and QC for HQ3 Aluminium Cladding Panels
Use this QA and QC checklist to assess aluminium cladding panel installations on HQ3 projects. Record site, level, and elevation details; confirm panel type and labeling; check colour-coded fixings; verify installation to design for gaps, height, and alignment; and inspect surfaces for scratches or damage. Review brick slip brackets, capture photos and notes, document compliance, and complete sign-off to ensure safe, compliant facade work.
by Pavel Mihaylov, from the Community
Downloads: 0
Get
Template
QA QC Checklist for Aluminium Cladding Brackets
This QA and QC checklist supports the inspection of aluminium cladding brackets on construction projects. It helps verify the correct bracket type and fixings, accurate drilling diameter and depth into concrete, adherence to approved drawings and grid lines, and installation in line with the approved design. The checklist also covers penetrations in window sealant at a minimum 50 mm distance from window brackets, levels and elevations or sections to aid site tracking, and final sign-off. Suitable for facade and brick slip bracket installations by contractors and QA teams.
by Pavel Mihaylov, from the Community
Downloads: 0
Get
Template
Corium Brickslip and Rail Installation QA Checklist
This Corium brickslip and rail installation QA checklist is designed for facade and cladding works on projects like Rose Court. It guides inspectors to confirm carrier rails are aligned to datum, correctly seated, and fixed to the designed pattern with proper bearing on vertical supports. It checks gaps at abutments, support at corners, and use of specified fixings. Brickslips are verified for correct seating on rails, perpendicular spacing, alignment at abutments, straight cuts to acceptable quality, undamaged corners, and replacement of chipped units before pointing. Includes sign-off fields for project and client site managers.
by David Tucker, from the Community
Downloads: 0
Get

QA and QC Checklist for Brick Slips Helping Hand Rails

This QA and QC template supports inspections for brick slips helping hand rails during facade installation. Use it to record site, level and elevation details, confirm drawings and setting out, verify vertical rail positions, fixings, and sliding or fixed points meet manufacturer guidance, and capture client sign off. Ideal for contractors and installers standardizing quality checks on cladding support rails.

by Pavel Mihaylov, from the Community

Get

Template

QA and QC for HQ3 Aluminium Cladding Panels

Use this QA and QC checklist to assess aluminium cladding panel installations on HQ3 projects. Record site, level, and elevation details; confirm panel type and labeling; check colour-coded fixings; verify installation to design for gaps, height, and alignment; and inspect surfaces for scratches or damage. Review brick slip brackets, capture photos and notes, document compliance, and complete sign-off to ensure safe, compliant facade work.

by Pavel Mihaylov, from the Community

Get

Template

QA QC Checklist for Aluminium Cladding Brackets

This QA and QC checklist supports the inspection of aluminium cladding brackets on construction projects. It helps verify the correct bracket type and fixings, accurate drilling diameter and depth into concrete, adherence to approved drawings and grid lines, and installation in line with the approved design. The checklist also covers penetrations in window sealant at a minimum 50 mm distance from window brackets, levels and elevations or sections to aid site tracking, and final sign-off. Suitable for facade and brick slip bracket installations by contractors and QA teams.

by Pavel Mihaylov, from the Community

Get

Template

Corium Brickslip and Rail Installation QA Checklist

This Corium brickslip and rail installation QA checklist is designed for facade and cladding works on projects like Rose Court. It guides inspectors to confirm carrier rails are aligned to datum, correctly seated, and fixed to the designed pattern with proper bearing on vertical supports. It checks gaps at abutments, support at corners, and use of specified fixings. Brickslips are verified for correct seating on rails, perpendicular spacing, alignment at abutments, straight cuts to acceptable quality, undamaged corners, and replacement of chipped units before pointing. Includes sign-off fields for project and client site managers.

by David Tucker, from the Community

Get

QA/QC Aluminium Cladding Carrier Rails Checklist

About author

You might also like

QA and QC Checklist for Brick Slips Helping Hand Rails

QA and QC for HQ3 Aluminium Cladding Panels

QA QC Checklist for Aluminium Cladding Brackets

Corium Brickslip and Rail Installation QA Checklist

You might also like

QA and QC Checklist for Brick Slips Helping Hand Rails

QA and QC for HQ3 Aluminium Cladding Panels

QA QC Checklist for Aluminium Cladding Brackets

Corium Brickslip and Rail Installation QA Checklist